i have issue in printing i dont know where is the problme ,after three to four print ,printing will be fine
Type: Posts; User: umer_ml
i have issue in printing i dont know where is the problme ,after three to four print ,printing will be fine
Yes completely full of toner! and toner leak out of developer tank cover
Image cycle appear again and again,i have cleaned developer tank and toner sensor again ang again,but image cycle appear after every 20 to 30 copies,and developer tank is full of toner
hi dear
now developer tank is full of toner and image cycle appear,machine is not ready to copy,
how much for 80 units or one container
hi friends , i have little issue with my machine that developor tank overload with toner and code appear 2100 and 2300 ,how can i resolve this issue.i have clean many time developer tank but code...
Hi I was routine cleaning of my dp km 6030,after clean my machine i face code c0410.i dont know what to do now ,i have clean and check dp main pwb with ctc and dry well but same result code appear...
Hello I have problem with my data feeder.when i load paper in data feeder and start copy ,then feeder pull many paper and paper jam in data feeder.i have clean every thing but same problem .any one...
I could find the problem, and we could see is a cooling issue, that comes with the machine by manufacturing, if you check in the diagnostic of the machine ( U199 ) you can find the surround...
how to reset imagistics c2520 or biz hub c250 to factory default.i want to restore internal setting like ip address internal color density and every thing.
hi friends i have little problem while printing jpg files a4 scanned images while spooling machine print very slowly after spooling machine perform regular.i have connected my machine via cross cable...
well bro format jpg scanned image connected via 10/100 switch and feiry is without ram .scanned and print image is a4 double side, driver pcl6 .no vpn involved connected directly via switch.if i...
hi friends i have little problem print via computer.i have attached my km 6030 via ethernet cable .i have scanned doc of jpg format but when i want to print these files machine print well but slowly...
check and clean the cleaning blade .some time paper stuck with cleaning blade.
Hi everybody .any one else can help that if i want to print and save copy from adf 1/1 or 2/2 option what would i do.
my hp cp3600 hve gone long initilize after cold reset and didnt normalize.any idea.
open front door of the machine then turn on and type from keypad 10871087.machine will in the maintenance mode then 20 21 option reset machine.thats all
print sys v?
i want km5530 develpore drum and cleaning blade .do you have?
km 5530 original or compatible developer wanted.
what happen that i use waste toner in 6030?
i have km 5530.copy of document is very well but photo like nic card blurred straight lines appeared.anyone help?
bypass the upper heat sensor with1 k veriable resistance and adjust veriable to the proper voltage
or mail me .
[QUOTE=jhon paulivan;310319]hai...........
Kyocera km 8030 optimizing performance troubles solution
do heat secor hain aik waist bottle ke neechai hai aur doosra pichley cover ke upar uper waala...