Working on a KIP 7170 which I think is a rebadged Kyocera (4820 or so?) if I'm not mistaken. I was cleaning the charge corona and had slid back the scanner unit. The machine was on at this point...
Type: Posts; User: teklife256
Working on a KIP 7170 which I think is a rebadged Kyocera (4820 or so?) if I'm not mistaken. I was cleaning the charge corona and had slid back the scanner unit. The machine was on at this point...
Maybe this is a dumb question and has already been covered. Are the MX-61NVBA and MX-60NVBA black developers interchangeable? Need to replace the black developer in a MX-6070 and I’m out of the...
MX-6070V with an Admin PW that cannot be retrieved. No IP address assigned (0.0.0.0). When cloning the machine what else besides the SN field for Airprint needs to be addressed? Is there anything...
hopefully the pics came across better this time. Somewhere I read that the CCD gain is way off. But I really don’t want to just start throwing parts at it without a better understanding
5983759838
Working on a sharp MX–2640 with an error code E7–11. Have cleaned the mirrors, scanning unit and white reference sheet. Not sure where to go with this one. Included is the 63–1 from the 2640 and...
Reinstalled the TU16 and machine is working again. Will have to inspect the harness and flash the firmware when I go back.
Yes, I set it aside
Removed a TU16 (inner tray/blank) from a MX-6070 in order to install a MX-FN27N. The 6070 was printing to the TU16 without issue. Error code comes up after installing the finisher
Followed the...
Anyone encounter an E7-25 on a MX-6240? Customer called it in and I’m headed there by end of week. Haven’t ran into this code yet and the manual is pointing to lsu/pwb and harness.
Any insight...
In the past Storage Backup would only work via Internet Explorer. It just occurred to me that I didn’t try Chrome. Would 56-3 get me User Register Information? Thats basically what I’m trying to...
When I try to perform a Storage Backup through the webpage I get a "Failed", 'Failed - Network Error" or "Couldn't Download" message. I have tried Edge, Brave and Firefox browsers. For a Password I...
Thank you, yes I see it now. Did not expect it in Accessories. I appreciate your help.
Is the pic showing up in the post? The tray in question is circled in red. I'm not finding your PN.
What manual are you referencing?
Anybody have a part number for Height Tray on the MX-FN28 finisher? It should be on pg 59 of the Parts Guide but it is completely omitted. It's a two piece unit that just slips onto the metal mount...
That's the same verdict I came to as well. I swapped the mSATA with a known good mSATA and no change. Also swapped the suspected bad mSATA into a second machine and it fired up just fine. It would...
Have a MX-6070 that constantly cycles power. The screen remains blank the entire time while the machine boots up and then powers back down. On the SCN-MFP PWB there are 4 LEDs next to the Flash ROM...
Any have the manuals for the Sharp Mx-6070V?
Happy Friday guys/gals!
I’m working on an MX–6240 that will freeze screen when trying to make a copy, printing, trying to print internally, etc. The machine seems to boot up just fine and comes...
buttons_23@hotmail.com
thanks!
Getting ready to replace a failing HDD and looking for someone with the watermark
Thanks in advance
Thank you, I was able to get the manual. Will close this
Would anyone have the service manual for the MX-3071?
Thanks in advance
New style scanner. When color scanning to a pc the image has two vertical yellow bands on the right side. The yellowing corresponds to scan LEDs 4 and 5 (left to right). I cleaned all LEDs and...
Update: Replaced the HDD and all is right in the world again. After replacing formatted and flashed FW. I must have had a bad hard drive when I replaced the first time around. Thanks everybody...
That’s right. Will try another HDD with what’s been shared above