go to your system settings, image send settings, common settings, set your default display settings to the mode you want.
Type: Posts; User: spanky
go to your system settings, image send settings, common settings, set your default display settings to the mode you want.
just found the Puritan 3130 swabs for less than $18.
https://www.hisco.com/Product/3130-22929
Let us know if these work so we can order them instead of the expensive swabs from Sharp
Copier technician needed for a locally owned copier company. Strong electrical and mechanical experience a must.
Benefits include company car, medical insurance, and 401K.
We are a one line...
Print the 22-6 and all of the maintenance information is on the first page.
If you go to Sharp's website you can download the software you need and there is a manual with it for installation and setup.
I am also leaving the copier field.
I am retiring after 36 years in the field.
Last day is Dec. 30th of this year.
Had to replaced a few of these toner drive units.
part number CCOVP0249QS51
Check the auto shutoff time
I have a test chart with the space shuttle on it, but it was distributed by Sel-Drum.
See attached
Which board were the switches on?
This is a very old machine.
If you want to scan to network folders or email it will not work for you.
You will have to use a universal or generic driver to print to it.
They were good...
The number provided is for the entire assembly.
It's not a Sharp product, rebadged Lexmark.
Are you sure you removed all of the packing from inside of the printer?
The first batch of this model was released over 5 years ago, before the TLS 1.2 was used.
There is a firmware update to install the TLS 1.2 on the 3070.
I don't have one to test, but if you use the pamphlet mode and then tell it not to staple it may work.
Could you upload some samples?
See attached guide
This can be adjusted in sim 50-10-A. the default is 102
Noise was from the waste container, replaced it and noise was gone.
Noise was from the waste container, replaced it and noise was gone.
I have a Sharp MX-C607P (Lexmark C6160) that has a loud squeal from the left side of the printer. I have run motors in the simulation mode and can' t duplicate the noise.
Pulled the fuser and...
I have a Sharp MX-C607P (Lexmark C6160) that has a loud squeal from the left side of the printer. I have run motors in the simulation mode and can' t duplicate the noise.
Pulled the fuser and...