In my scenario last week someone tightened developer with wrong type screw. There is pic ,something similiar (I don't know name of this screw,see atach).Devloper must move left /right when You...
Type: Posts; User: aco.bk
In my scenario last week someone tightened developer with wrong type screw. There is pic ,something similiar (I don't know name of this screw,see atach).Devloper must move left /right when You...
Replace bootrom and try UFRII print driver.
Poslato sa MRD-LX1 pomoću Tapatoka
There is no way to print with C bootrom on this model....
Poslato sa MRD-LX1 pomoću Tapatoka
45907
Also try this from service bulletin.
IR Advance C5051 E027
Read Zoraldinho s and Teckat s post.
Machine not starting OS.When Powering on error E748-2024 is displayed.
After replacing FM1-E355-000 MAIN CONTROLLER PCB ASS'Y, 2 (IR-ADV 4251, 4245, 4235 SERIES) machine work normally.
Just...
Is there error only when scanning? Is it copying fine?
iR throwing error e005-001 for a few days.(Fixing solenoid cables pinched before 2 months ago,replaced fuse 1,5A)
38949
Came up yesterday and error displayed again.First I was disconnect Finisher...
3884038841
on the end it was dirty encoder.thanks a lot
It makes sound ,,like motor rotating too fast,,....bzzzz ☺
Sorry for bad English
Hello.I have problem with paper advance (print sample from internet ).Replaced carriage belt,Encoder Strip and paper axis motor with encoder but problem is still here.Sample is same like this.38740
...
C3220 Number of Rings Before Fax Answer
with or without imagePASS-U1 (Optional)???
Using OEM or Compatible upper roller????Already see that on NonOem roller.
try this
34894
remove lft cover and You will see laser.
https://s32.postimg.org/3jqo2uow5/2520.jpg
I had that problem with iR2520.
From back side open rear cover and You will see 3x clutches.Try to swap their places(from develop move clutch to registration,or another combination).
Problem will...
Already had similar problem on ira 8095.
Mr. Teckat helped me to resolve error.
He said :,, I would check wall voltage supply ,especially proper ground-from Neutral to Ground =0v>0.5v max.
Poor...
hmm,this is wierd->in service manual there is no tray that support SR A3 (pic1),33337
in tray 3,4 there is SR A3 format marked. pic 2 33338
It is the first step that I dide.;););)
Normally recognize A4,A3,B4..... but wont SR A3 ,both trays same problem.
iR ADV6055 tray 3 & 4 have SR A3 format in cassette but my iR wont recognize it.Is there any setting in service mode to enable this format?
When I put SR A3 paper in tray 3,4 machine not displaying...
What happened when You try flash system through updater on machine?
probabl Your machine means that there is no DADF and reader installed.(Print version)
Try this
Connect the power plug of the host machine to the power outlet.
2) Open the switch cover and turn ON...
Pls help me to find proper grease for
imageRUNNER 1730 when replacing/repair fuser film.Which grease You prefer to use.Is it possible to find on ebay or alibaba?