I found that if the PM's were carried out as per the Manual and all parts changed as per Schedule the Machines would run OK between Pm's.
Invariably you would find the machines that got through the...
Type: Posts; User: scully
I found that if the PM's were carried out as per the Manual and all parts changed as per Schedule the Machines would run OK between Pm's.
Invariably you would find the machines that got through the...
Due to Redundancy Engineer with experience on Neolt/Oce/Xerox Large Format and Ricoh Large & Small Format also Bay / Rogoli / Neolt Folders requires position as Engineer or Manager.
Trained...
The MP2000 does have a Fuser Cleaning Roller contrary to a previous reply !
John
Uk:o
NO !:)
Agree with other posting , try Drum as you have replaced Developer
Resetting Sensor is only masking problem !
John
Uk:):)
:)More Info would help , such as Meterage and last PM Service ,or is it due ?
(PM 300K}
John
Uk
Have you tried different Copy Paper ? I have many of these Machines with the Temp at default and have not this problem !
The only time I have experienced this is when Customers have either copied...
45 years
Xerox / Oce Large Format and Ricoh Large and Small Format.
Have worked on KIP/Neolt/ Large Format
Bay/Rigoli/Printfold/Neolt On Line and Off Line Folders
John
Uk
Is the Paper Tray set on the correct size ?
Just a thought !
John
Uk :)
2060 we use SR841/SR850/SR860/SR861
The SR970 is used on MP5500/MP6500/MP7500
John
Uk
:)
From the actions you have taken already the only thing I can suggest is that you return to the Fuser Temperature and I would use a Probe to actually prove the Temperature if you have not done this...
Have you checked that the Donor Roller of the Fuser unit is supplying Oil to the Fuser Roller OK and not stalling ?
Sometimes the sleeve splits and causes this problem.
John
Uk:confused:
:) Can you specify in more detail as I may be able to help you ?
John
Uk
Not really sure of the error you have.
Has the Machine reported any other Info either Display message or SC Code ?
John
Uk:confused:
Machine Model ??
John
Uk:o
I promise thats it to ! Change the Transfer Roller.
Amazing how distorted this has become since first reported !
Always good to have differences of opinions and idea's though which is encouraging...
The Transfer Roller does not have a Cleaning Roller but the Charge Roller does.
There is also a Fuser Assy Cleaning Roller.
John
Uk
I would Change Transfer Roller as I have had this on the first Copy out if you ask for say 6 Copies.
John
Uk:rolleyes:
NCart is right,so my memory was not that good !
The Info I gave was for Aficio 1027
John
Uk:rolleyes:
If I remember rightly it is 4-911-1 to Format HDD
John
Uk:)
Check ID Sensor is not dirty !
I have experienced this fault on other Ricoh's which had this fault believe it or not !
John
Uk;);)
When did you carry out the last PM and replaced parts as the Service Manual PM Advises ?
What is the current Meter reading and the reading when last service carried out ?
John
Uk
As already has been said , do your PM's as per the Manual.
It pays in the long run I can assure you !
John
Uk;););)
Look at the siting of the machine and the environment as this is a probable cause as first thing in morning !Try running The fuser temp in 105-9 at a value of 90 rather than default of 60 this means...