Search:

Type: Posts; User: listsubscriber

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Re: C253 Grinding Gears & Insert Waste Toner

    After a lot of vacuuming and manually turning the gears above the black imaging unit (which I believe actually mesh with the transfer belt assembly gears), the machine is running again with NO...
  2. Re: C253 Grinding Gears & Insert Waste Toner

    Great post!! No idea why my searches did not find that post. Looks like a long job to try and clear whatever is clogged in the toner transport. Thanks for the replies.
  3. C253 Grinding Gears & Insert Waste Toner

    We were called about a grinding noise in the machine which still makes copies and prints, but it's just loud. The tech can cheat the door and sees that the gears behind the waste toner were grinding....
  4. Replies
    3
    Views
    617

    Re: IRC 2880 with 0105 Codes

    It's the plastic one so you are probably on to something. We will try a new one with the metal tip. Thanks for the help!
  5. Replies
    3
    Views
    487

    Re: Ricoh 2238 Waste Oil

    Banging the bottle to knock the black flag down further did the trick. Thanks for your replies!
  6. Replies
    3
    Views
    487

    Ricoh 2238 Waste Oil

    Has anyone had any success recovering a used waste oil bottle? The Waste Oil Full message displays and halts printing. Even if all the oil is drained from bottle, the message stays. Opening and...
  7. Replies
    3
    Views
    617

    IRC 2880 with 0105 Codes

    We have an IRC 2880 that jam every time we use tray #1. The bypass and tray #2 work fine. The jam occurs no matter what size paper we use. We replaced the entire feed assembly for tray 1, but the...
  8. Replies
    2
    Views
    545

    Re: HP CLJ 4600 Cyan Shifted

    Your solution worked perfectly!!! Thanks for the assistance!
  9. Replies
    2
    Views
    545

    HP CLJ 4600 Cyan Shifted

    We have a CLJ 4600 with blurred prints. The PQ page shows that the cyan is shifted.

    We replaced our almost new HP OEM cyan with a brand new HP OEM cyan, same shift.

    We disabled the cartridge...
  10. Replies
    1
    Views
    416

    eStudio 203L Paper Cassette

    We have a 203L and it needs a new cassette. It would be great if we could just find the collection of gears on the rear of the cassette. The parts manual lists the cassette as 6LA56960000. However,...
  11. Replies
    7
    Views
    795

    Re: IR5000 Void Line

    You guys were correct, the cleaning pad was not returning home. We turned the machine off, moved the cleaning pad to the home position, plugged it up, turned the machine on, the pad stopped half way...
  12. Replies
    7
    Views
    795

    IR5000 Void Line

    We have an IR5000 with a 1/2 inch void on every copy. Even test prints have the void in the exact same spot. We have replaced the developer unit and laser, but the problem is still there. The void...
  13. Xerox WC 5735 Jamming Issue & Security

    2 questions, the 2nd one, I fear I already know the answer.

    1. This WorkCentre is giving us a problem with jamming. The paper feeds fine from the bypass tray. However, all trays besides the...
  14. Replies
    6
    Views
    565

    Re: IRC3480 Blank Copies

    The page is completely blank. Even the sky shot is blank. Test prints printed from service mode are blank as well.

    We will check the 2nd transfer roller and contracts when we go back. We will...
  15. Replies
    6
    Views
    565

    Re: IRC3480 Blank Copies

    Transfer belt and drums have the image when a run is stopped. Thanks for the reply!
  16. Replies
    6
    Views
    565

    IRC3480 Blank Copies

    We had a tech go out and he misdiagnosed the problem for blank copies and prints. We put 2 brand new sets of drums units in the machine as well as a new Transfer Belt Assembly and the machine...
  17. Replies
    1
    Views
    666

    7115 Maintenance Light Err

    I have a Konica 7115 and the maintenance wrench light is on. I have drum, blade, and developer to change for the machine. I checked the count for the PM and it was 32k. Short of the 40k, but copy...
  18. Replies
    0
    Views
    307

    mj1104 cover open

    I've gone through the cover open jam section of the service manual, but I can't get the finisher to cooperate.

    We weren't even making copies when the message showed up. If I open the duplexer or...
  19. Replies
    0
    Views
    469

    7120 LDAP/Active Directory Auth

    I have security setup on 7120 to use our Active Directory. Users must login at the machine to copy in color. Printing in color from the workstations works fine now as the users are already logged in....
  20. Replies
    0
    Views
    248

    AP600 Shifted Printing

    I have an AP600 which shifts the print when printing multiple pages. The print shifts about 1/4 of an inch on the 2nd page, then about 1/8 of an inch on 3-n pages. Multipage jobs eventually jam with...
  21. Replies
    3
    Views
    3,882

    Re: IPF 600 2f23 error

    Good info. I'll give cleaning the tubes and a new purge unit a try. The tubes are full of ink and I can see a bubble from time to time go thru the tube so the ink seems to be flowing.

    Thanks for...
  22. Replies
    3
    Views
    3,882

    IPF 600 2f23 error

    I just had a client give me a Canon ImageProGraf ipf600 with 03130031-2f23 showing every time the machine is started. The service manual says the pump can not operate. After taking off the covers,...
  23. Replies
    2
    Views
    672

    Re: AL1661 Developer/Toner Leak

    Good advice. We will change her drum unit and give her the heads up about using the non-OEM products. She got a GREAT price on these things. She ordered non-OEM toner and drum which have not arrived...
  24. Replies
    2
    Views
    672

    AL1661 Developer/Toner Leak

    We have an AL-1661 which will dump half a teaspoon of extra toner on each copy. The toner/dev cartridge will have developer pulled out of it that lines up with where all the extra toner falls into...
  25. Replies
    9
    Views
    2,925

    Re: T1100 Generic Firmware Error

    Thanks for all your help. New engine pcb and formatter took care of the problem. Tried the drive off the old formatter and it was dead as well. We are putting again! Thanks again for your assistance!
Results 1 to 25 of 83
Page 1 of 4 1 2 3 4