thanks again, I m currently out of town and had not got a chance to check this mc yet as soon as I checked it out I will be inform..
thanks
Type: Posts; User: pinetree
thanks again, I m currently out of town and had not got a chance to check this mc yet as soon as I checked it out I will be inform..
thanks
Thanks for reply and suggestions, I will try that and i will inform with results...
thanks and have wonderful day....
canon ir 550, when turn main switch on, mc goes in to sleep mode, I had to hit on/off switch and it starts to warming up, after mc warms up and ready copy mode, hit copy, the scanning lamp turns on...
I fixed the problem with short pin j103 & j104 to reset copier
canon c130f, when turn power on, it display e001 and power off by it self, it may be power supply but is there any way to reset this problem?
I have ir c3220 with imagepass c1 and tring to set up ip address, I went in to run setup at printer setting but c1 is asking for the password which I don't remember what it was, is any body know how...
thanks for reply, I will try those on monday and will be inform
have good weekend..
thanks again
Gestetner 3227, It keep saying add toner, even there is new toner installed, so I replaced new drum unit, add toner light went off but made about 30 copies "add toner" display again
anybody know...
thanks for reply, I will try all as you suggested and will be informed
canon ir c3100, the display panel black out, I turned power off and on mc cycle as normal but on display panel is black out and it seems all keys on operational panel is not functioning , it has...
you can download "network scangear"for ir 3300 from canon website (download)
tnanks for your reply, that's what i though first place but wasn't sure.
brother intellifax 5750e when power pluged in the machine the display only shows black square bars on second line, anybody knows what that could be? please help....
copier needs to install the print kit to use as a printer, you need boot rom "N" version and nic card.
thanks guys, I got it to working, I had to change interface to "0" and input IP address first and saved then change interface again to "3" in the service mode.
Thanks guys, my customer was running 10,000 copies but it keep doing adjust autograduation after number of copies it delayed the job. I was going to turn it off for temp. thanks anyway....
good...
Anybody please instruct me how to set up network. I have imagerunner c3200 with imagepass c1 installed and I never had set up to meke it network print for this before. I have installed print driver...
Anybody knows how to turn off auto gradation function or set # of copies before m/c does auto gradation for ir c3200?
Thanks guys, I tried for luck to save some $$$$
can anybody tell me where is the ATR sensor is? and if it has a open circuit, how to clear?
I just cleaned the t/b unit and reinstalled, has error code of E20-03b0, the cyen drum unit has 127% life...
Are you getting thin lines when you coping? as well as printing ?
If you getting line when making copies and print is o.k, then clen the small glass on the left there may be dirty or spots on the...
I belive the part# is
FC5-0343-000 ARM TENSION FRONT
FC5-0344-000 ARM TENSION REAR
With my field experience "Front Arm Tension" is the one brokes most of the time..
oh, o~~~k, thanks 4 your info,,,,,,,
I will try that website...
Good day,,,,
Thanks for reply, but what u mean by click software works for us...
I need a sales and service management software for copiers,
Anybody have this information where I can get or which software is good to use?