according the sharp guys the preliminary units that were shipped out for review before release actually had cleaning webs. they removed them when they went to production
Type: Posts; User: fireater
according the sharp guys the preliminary units that were shipped out for review before release actually had cleaning webs. they removed them when they went to production
i have a bp70m45 that like to throw h5-20's. every few months. i updated fw. replace fuser did meandering 6-8 "many times". still doing it. i think the fixing sleeve dont turn when its waking up...
does im c6000 toner work in a im c3000?
I know there is a scanning job status page to view if its sent or failed. but is there a status page i can print out that shows the reason it failed? (authentication /server not found etc) like a...
also check the ends of the stripper plate.. they bend.. then it rubs the fixing belt.. they arent supposed to touch the belt at all.
have you seen the bulletin for the new dev units? the dev spillway hole is larger and makes the dev amount less likely or over fill / over tone. perhaps this is an issue? then charger arcs and it...
their was a bulletin about that too i think
Bulletin Number:
MFP-TB-1036
Bulletin:
Modification of a Clutch in Main Drive Unit
well it still does it even though it is now connected and configured. printing works and scanning works.. we get email alerts ..
Sharp Canada offered a possible solution
enable pseudo night mode...
hmm but i did eventually connect the copier to a network. and it still did it
..um it was doing it with no network connection IE no scan to email setup .. they dont use the scanner ability
yes i attached it to the network.. it prints fine
so customer has MXM6071 with " network error -timeout error consult administrator" popping up. the copier wasn't even connected to the network (no network at all) also no fax.
it has the latest FW...
but where is it available to download?
doesnt help either
we did that at the beginning. we are only using 601lh and 601fb now to limit stock quantities. also the bulletin about adjusting the temp (TT-070918_1) might help? but i've never...
im having it on mx4070 and mx4071 in same building , different offices.
66-10 does fix it
wondering if there is dsl on the fax lines? or noisy phone lines?
Or monitor the AC power? Perhaps the power is sagging at some point?
also have had the black sensor cushions things under the sensor lever( black and foam to stop the noise of the lever hitting the plastic when it returns) just remove them. the can get sticky .. the...
window photos is crap.. (if thats the issue) there is a registry hack to re-enable the old xp win 7 style windows photo viewer.. works way better
i guess try swapping mfp/scn board next if you did the dissconnect adf first and it still doesnt work
i think the n is different from the V series .. n is Msata. V is Emmc
i looked in parts guide both are referred to as Msata.. but different part numbers
57175mx6070n? if all the lights are not on the mfp board have you a copy of the led checklist? probably msata dead
have you tried a different mail server for testing?
we have the lexmarks doing this as well.. put a shim under the fuser to tighten the belt.
i know this has been asked but im not a konica repair guy. I have a backup of a customers konica address book and more with the .dat extensions.
how can i use pagescope data admin to convert this...
We make our own SD card. Take a known good card ..copy it with the tool from usbit. Buy new card larger than old one (16gb seems good). Write new card with tool.
Fixed. usb image tool alex's...