Dear
I have one problem with Canon irc 2380i and inner finisher Z1. When paper come out and once the quides are aligmend, the guides slide into a sheet of about 1 cm. That do with all sheets....
Type: Posts; User: E-Maintenance
Dear
I have one problem with Canon irc 2380i and inner finisher Z1. When paper come out and once the quides are aligmend, the guides slide into a sheet of about 1 cm. That do with all sheets....
Hi, does anyone knows how to disable drum replacement message? In service mode?
Thanks and best regards
I replace cord wheel FL3-4135 and encoder assembly FM4-8343 with new one but error stay. E012-0106. Machine have new yellow drum.
:confused:
Hi
Check in windows 10 in Control Panel\Network and Internet\Network and Sharing Center\Advanced sharing settings password protected sharing turn off. password protected sharing off and will...
Hi.
I have one problem. Machine somethimes show E012-0106 Customer turns off and on and machine work properly day or two than show error E012-0106 Failure in rotation of Y Drum Motor. Someone has...
Hello. Does anyone have a problem with printing on A5R two side? Namely, when the customer prints A5R one sided printing ok when printing two sided make wave about 7 cm from the edge (just as nip...
HI. I have problem with one of Canon CLC 5151. Customer call me for weak text or print and when i pull out BK drum unit and put him in somethimes machine start work properly for a while. Scan is in...
Hi.
I have problem with new drum c-exv 21 magenta and cyan. Drum unit is done approx 2% of lifetime and then makes whine lines. We use original toners and I replace ITB unit with new one, and i...
Hello.
For me it is always help this process and machine works like a charm :cool:.
Dear
I have a machine with error E804 which is defective fan on power supply. From part catalog is evident that the fan is part of the power supply and can not be ordered separately so I was...
Dear.
Does anyone know if it is compatible duplex unit from Canon IR 2018 to Canon IR 2016? I now thats a similar machines but still....
Thanks a lot and have a nice day.
Hi
I have C350 with total 111.000 prints and copies with first drums,... and when customer take copies or print all prints are blurred. All colors.
Any ideas? Thanks and best regards.
What really had no such problems?
This is sample print when prints go wrong! Somethime prints are good and next print is like these pictures....
238372383823836
hi
I have a canon ir 2020i and once in a while I printed or coping a black background. I have replaced the drum, developer unit, the latter firmware, the basis remains ... Does anyone have...
I have already replaced all the rubbers on finisher, upgrading the firmware, check for all modifications and now im wondering if i have any chance if i replace these belts? Sometimes finisher make...
Welcome. I'm interested in if i can switch between the Finisher T1 from IR 5570 and AD1 from IR 5055 at least test? Or the case will work? Thanks and best regards.
Hi there. Becouse i work on the same problem as described here I wonder if the problem is successfully resolved? Whitch clutch do you replace? Which part number and where is it located? Thanks for...
L2 , CODE 1104. On senzor PI104 . Thanks and have a nice day
What no one really had these problems?
Dear. I got my finisher T1 and reporting PI104. I Replaced all the Rubbers and we are still Responding STNRY PI104 and down sounds like two gears that rub on one another. If you copy-print one page...
Thanks for helping me manuals3you.... I already solved the problem...
Hello
I have one problem with my irc2380. When customer printing or coping on manual feeder allways paper was jamed and not pull paper insade the machine. Pick up from manual feed yust make some...
Hello
Today i was upgrading main firmware, boot,... on new ir 2520. When i was install accros ust main firmware, machine reboot properly and wake up normaly. When i was instal boot,accros ust,...
I need to scan on usb memory stick pdf, tiff or jgp, and no scaning via usb to computer.