Good day, i have a Ricoh MP 3055 with a jam in the area of the fuser C. i hsve searched every where in the area but to no avail.
Can anyone shed some light on this ?
Type: Posts; User: tibbs
Good day, i have a Ricoh MP 3055 with a jam in the area of the fuser C. i hsve searched every where in the area but to no avail.
Can anyone shed some light on this ?
Hello.... i am in need of a source for some ricoh MP 402 drums and toners, also for the MP 3055. I also are in need of a controller board for a MP 3055.
Regards.
Hi, i have a ricoh IM 430 with a loud grinding noise, i swapped the pcdu same problem. The fuser checks out ok. Any ideas would be welcomed.
Regards.
No bent parts...pressing the roller front or back does not seem to make any difference. Cause the roller is hard does not go down much to the press.
The drum barely goes in, less than a quarter.
Thanks for the info. But i have tried pushing down the pressing roller but i have no luck in getting it down. The drum is in the lock position.
The pressing roller does not go down even if i press...
Good day friends, i am having a problem with a ricoh DD3334 duplicator. The customer took out the drum but its getting stuck when reinstalling.
She cant seem to get the drum back in.
Any ideas.
I have a problem with a Xerox versa link b605 error 062-380. Can anyone provide me with a part number for the scanning lamp and the scanning lamp cable for this machine. Will be much apprecated.
...
Good day.. has anyone come across a problem with a leaky hopper on this unit ? I have a customer with two 2 of these machine an they both are leaking magenta toner. Any suggestions would be welcome....
Good day friends, i am not a xerox tech and we dont have xerox offices close by....now i have a workcentre 6027 that i need to replace the drum units. I have had a look at the machine, i have no...
Good day, i have a customer who is trying to print an image with a gold back ground but the machine is some how outputting a blue back ground.
Other than this the quality is good. Any ideas as to...
Good day gentle people, i am not so good at duplicators. I have a customer with a ricoh DD 3334 duplicator with a master problem.
1 The customer had the drum out of the machine for 3 weeks. so the...
Good day gentle people, i am not so good at duplicators. I have a customer with a ricoh DD 3334 duplicator with a master problem.
1 The customer had the drum out of the machine for 3 weeks. so the...
Thanks much to all of you who has responded and thrown in your suggestions and ideas, i will get back to you guys when get back from visiting the customer.
Any ideas as to solving Sc672, heading out to a customer in a few dats time with this issue.
Regards.
Update.... the ethernet cable is working fine...i connected my laptop direct to it still no link light. I have placed the formatter board on another machine and it works fine.
Hello i have an Hp 4015 in that the network connection light does not turn on when the ethernet cable is connected. I have setup an ip address but there is no connectivity. I changed the formatter...
Thanks so much to all of you. I did not have to dismantle the machine, i got it done as you suggested.
Thanks again.
Hello i have an MP 402 which has a problem with the toner cartridge not set properly. The customer said there was a paper jam in which they removed but after they placed the cartridge back in the...
This message is on the machine not on the PC.
The flag moves feely , i have not checked the sensor in sm mode but i will do so when i get back there. Also the tray is not broken. I have a service manual, did not have it with me at the time.
hello i have a customer with a Ricoh IM 430 with a no paper message in tray 1. There is paper in the tray, the tray lifter is up. Have anyone seen this issue ?
Regards
Ok i will send samples
Hello, i have a mpc 2504 with a leading edge registration problem when using thick paper from the bypass tray. I have adjusted it in sp mode and am still seeing the the image is creeping to the edge...
Good day friends, i have a Ricoh duplicator that's keeps jamming in the feed roller area, it i may say. Its miss feeding, i have replaced the pick-up and feed rollers but it still jams. Can anyone...