I have found, for small customers, setting up an outlook account works well. You have to verify the account to remove the initial daily email limit. (Free accounts are still limited to, I think, 300...
Type: Posts; User: ruben
I have found, for small customers, setting up an outlook account works well. You have to verify the account to remove the initial daily email limit. (Free accounts are still limited to, I think, 300...
Enter the normal SP mode key combination, then hold the EXT3 (left panel of the screen, bottom button) key and press the SP mode you require.
It is also possible that a user changed the Function Key Allocation settings, under System Settings.
If you are comparing the colour of a print to the colour on a monitor, you may be in for a shock if the monitor isn't properly calibrated.
What are the directions of the streaks? In the direction of paper feed, or front to back?
They should dispose of the HDD themselves. Handing over the drive to another could open themselves up to litigation.
The built in HDD format is not perfect, neither is performing a manual format...
Are you installing manually through AD, or GPO?
If GPO, you can set a refresh rate which resets the driver settings if changed from default.
In all cases make sure you open the driver's...
The new Mac drivers are all the same for 10.7 /10.8 upwards. Sometimes the website detects the Mac OS X version, but you can just scroll to the bottom and click Mac drivers to see them all.
By...
The old technet site should redirect you. You will need to register on the new site (best to use a company email, if you have one), specify your company details, verify your email, and wait for a...
What jam codes are you getting?
Have you tried the newly modified feed assembly (D684-2101)? Ricoh have changed the material for the rollers inside the belt to increase contact with the paper.
I have had many registration sensor...
Jet Direct Socket is the better option to choose for printing, with LPD (aka LPR) the connection can get lost randomly; this happens with all brands, when printing from a Mac.
You can use the password reset switch on the MFPB, see: Admin password reset Sharp MX2650 for a picture of the switch.
The MPC4502 uses a dual lamp system for heating, no induction unit.
The inverter it specifies here may be a poor translation or cross-over from a previous model. My bet is on the latter.
For me...
From Goose's Guide:
B222/B224
SC 491
Drum/dev bias error - replace drum unit(s)
B222/B224
SC 491
I had a 3002 recently stop working with Gmail, updated the network firmware cured it.
This model only supports scanning to Windows 7 or earlier for folder, to an open port 25 email (which most free ones no longer support; unless you use the restricted Google Relay), or to FTP.
For...
Electrode plate for the thermal fuses.
See: 38150
Are you setting the user code through the CUPS interface or directly into the print dialog?
This is from Ricoh UK so may not be the relevant TB, as we use different reference numbers.
37990
You can do this with the RPCS driver. You will need to use Preferences > Add/Change Custom Settings > Misc > Reverse order print > Save As. Give the new option a name, and everytime reverse order...
Sharp have been moving away from the old dip-switch resets, for the newer models you have to request a password reset directly from Sharp. They will issue you with a reset code that can be used on...
The best solution is to purchase an 03 model with the optional Imageable Area Extension Unit, that way a full image can be printed onto a larger paper size and cropped to fit.
You can adjust all...
You will need to install SmartDeviceMonitor for Admin, and use User Management Tool > User Counter Information > File > Export User Statistics List.
The SDM has been discontinued, so you will have...
Some models can tell you what values were recorded by each thermistor at the time of the SC.
SP1-113 Fusing SC Issue Time Info, even though it is marked as DFU should be accessible.