Search:

Hi, have u settled this issue?
i have an c454e, original is A3 and A4, but the scanned job became all A3.

guys, good day.
i have problem to scan to netapp storage with c458.
no problem to scan to the root folder (\\192.168.2.8\scan),but when scan to subfolder (\\192.168.2.8\scan\scan_peter) cannot get...

Thanks mate for the reply.
Im in Asia, so the night will not be cold, and yes, the office
A bit humid, but the machine running fine for more than 1 year
Already, this problem just happen recently....

Dear guys,
BH363 printing and copying blur in the morning. after few hours it will back to normal.
it will happen again the next morning. i have changed the IU set, problem still there.
any advise...

all the PC same outcome? make sure the secure print is not ticked.

for me i will reseat all the connector which u disconnected before u change the motor.

thanks guys for the advise, @BC, i can do it.
will post the outcome once i have done it.

Hi, u mean the drive clutch? what is PWB box? is it the waste toner box? refer to the picture, is it the clutch u mentioned.
thanks for the idea.

yes, done that.
this problem happen after i have change the dr512k,dv512k and take out the ITB to service.
before service, everything is just fine.

guys, can some one kind enough to send me the Bizhub C554 (non e) movie data?

thanks in advance.

maybe u should try HV board.
but if u are not a trained tech, i suggest call the local dealer to do this.

sure will do, will post the image again, thanks

sorry, is P&C, thats why cant snap the whole page. will supply the picture again

Hi Guys,
any solution for c364e after printed 6/7 pages, it will become blur for the rest of the print job?
sample as attached. already change dr512k, dv512k, transfer belt unit, problem still the...

im a contributor now.

i need the bizhub 362 Firmware as well.

thanks

appreciate if u can send to me as well, thanks in advance.

valueadvance@outlook.com

what i have done,
reformat the hard disk
clear the account track entries
reload the printer driver
try new and old version driver
try different PC to print.

Guys, i have a c364e, it cant print when the account track is enable, it showed Login Error at the details of the deleted job.
without the account track, no issue with the printing.
i did the...

Hi
have u solved the issue?
my problem was cyan cast over entire paper.
any help really appreciated.

Hi Guys,
my MFP is C652, with user authentication, some user allow to use colour, some are not.
my default copy and scan setting already set to Black.
but when user with colour access log in, the...

Hi Emujo,

thanks for ur details replied.
the problem now is when i use my mobilephone to call the fax line, the line got thru, but not into data mode, forever it will " toot toot"
good point...

if the fax is set the line 2, will it be able to fax out? i confirm the fax is set the line1 in the service mode.

my problem is the fax is not working even not in sleep mode.

YES, marketing area is set to correct country.

Hi, i have try to change the fax cable, problem still there.
This new machine replace the old KM421 machine.
When i call from my phone, it just ring, cannot go into
Data mode.