on the ops panel of the MX-M565N, there is a list of various functions ( color mode, paper select, exposure, etc.) on the left hand side of the screen...what I need to know is how to add and remove...
Type: Posts; User: dwarf
on the ops panel of the MX-M565N, there is a list of various functions ( color mode, paper select, exposure, etc.) on the left hand side of the screen...what I need to know is how to add and remove...
it seems that a firmware reflash fixed the problem....thanks.
we have a Mx-3570 that began kicking F2-71 codes...during the week-end we received normal status reports...Monday morning, the customer reported cyan and magenta cartridges popped out and gave F2...
we need some help with a KIP 7170 error... the first one is E 070...the second one is E 0(3059)...can anyone offer some guidance as how to deal with either or both codes... error persist even after...
we have a MX-LC13 connected to a MX-7500n...when we select the LCC , we get the message "check the connection between the main unit and the large capacity trays"... otherwise, the machine is...
fuser mounting screws are somehow damaged...brittle plastic...
maybe run the sims in 44-27...do all the usual calibrations and then power down/up...then take another look at 50-22...
can I ask a big favor for someone to post the most recent firmware for the MX-M753N
sorry guys, I gave the Polish number for the bullitin...it should be MFP-TB-1142R...
it was supposed to pertain to removing the shutters on the MX-M5140...I got the number from someones reply post...not sure what it said exactly... trying to get an idea if they can be removed...
would somebody be so kind as to post a copy of this bulletin for me so I can read it? thank you so very much... MFP-TB-1142P ...
can anybody tell me how to replace the "U cassette lock" on the MX-3050 ? I can get it loose, but I can't seem to get it out....does it come out the front? or must you remove the back cover? is there...
we have a customer who has 3 MX-5141's that they suddenly can not print to ...they keep dropping internet access...sometimes you can ping them and then suddenly you can't...the machine will sit idle...
I'm wondering if you manually add toner does it normal up?
we had the same model with the same symptoms...we replaced everything you have except our machine eventually started giving off a burning smell and we had to replace the Lv Power supply..(if I am...
maybe a defective toner motor or a problem with the toner cartridge?...are you using artificial toner or OEM?
we have a customer who experiences a lot of electrical power problems in their building...can somebody offer a recommendation for the proper type of voltage regulator we should steer them towards?......
thanks for the help Dustin but that didn't work any other ideals what would cause an error code E7-25
exactly where is the board mounted?...inside LSU?... could you provide a P/N?
trouble code is E7-25...LSU test gives result of NG: CL... looking for any advice or "tales of woe" that you might have to offer... be as specific as you can... thanks to all in advance... copy count...
indeed...the one-way gear in the fuser drive unit is the cause of the problem...unless the unit you installed was fresh out of the box...
if it happens when making copies it could be dust on the mirrors...could also be the LSU...
does anybody have a copy of the old tech bulletin concerning the change in photo sensors that Sharp issued a while back? ... it listed several models that were affected as well as the locations of...
I ran the calibration ... what else should I have done?...
your description sounds about right...but the marks appear as soon as it is installed...no time for ANY build-up to occur... and the same thing on 2 different machines?...