I've had a deformed roller in the FS-612 cause a wavy paper issues on this model for me. The roller had expanded causing it to overdrive into the next set of rollers creating a wavy effect. With...
Type: Posts; User: CopyJunkie
I've had a deformed roller in the FS-612 cause a wavy paper issues on this model for me. The roller had expanded causing it to overdrive into the next set of rollers creating a wavy effect. With...
Like RRodgers said you should be able to print it from the hold queue or you could just "Process and Hold" and preview it with CWS5. The Password is not on the config page. I was just saying if you...
If your in a pinch for system software, you should be able to find the setup.exe file on the HDD and reinstall the fiery.exe program. I've done it on a IC-413 (C7000) and it got me up and running...
I want to say I ran into something exactly like this on a 4e series machine. We ended up increasing the resolution (I want to say 400dpi) and the quality was acceptable and the file size didn't...
password.ps hasn't worked for me on any recent fiery's, it just prints out of bunch of garbage text... but I still have it if you want to try. I think you're looking at system software to reset the...
OH and the machine isn't technically any faster... they just decreased the distance between sheets of paper to get the higher PPM.
It's my understanding that they are not out in the field yet as KM is depleting their 951 stock still. However I did go to training on it last month and its really the same hardware. The control...
Photo Reflective sensor is only on the 423. That transport sensor is a Photo Interrupter on the 363.
I have had the Transport Motor (M1) fail causing a mistiming in paper transport and indicate a J-9901. Think I have seen this on three different machines. Part number is A1UDM10000. Hope this...
We had to replace our fuser as well since after that we started getting C-3504 codes. Ended up getting a replacement machine... which also coded out with C-3504. That's when they developed a...
I have seen this on one of my C1070s. It was the machines original fuser parts and I want to say it was around 200k. Never did come to a conclusion of why the front collar cracked.
Drums don't seem to go life. I've seen between 50-80% of the projected life. Have had issues with collar on the LFR breaking as well.. on multiple machines.
Other than those couple of things...
PSU was the immediate fix for all the various messages. A connector to the RFID board was left disconnected when it was replaced causing the last SC to hang around.
Thanks for everyone's input on...
Replaced the PSU and the fuser message and SC730 code went away. Still have the SC681-01 so we are ordering the harness.
I will update the thread as I learn more. Thanks everyone.
Thanks for the suggestions everyone.
Looks like we will end up ordering the PSU. I will update the thread when I have more information.
Thanks again!
That is the string of messages this machine had when I arrived on the scene. At that time if I tried to access System SP mode, the machine would freeze and I'd have to reboot.
Since then we have...
I'm guessing all the bearings are all in the correct place so...
DSM once told me that between 1mil and 1.5mil you will have to replace the entire transfer belt. After pulling the Transfer belt...
I had a Bizhub 601 come up with a license management error after wiping the HDD. A technician can use the License Management Server to request a initialization code which should reset it.
A C3508 will occur after you had four continuous J3102 Jams.
You need to go into the service mode and set DIPsw 3-1 back to 0 to reset the service code.
Toner probably dropped onto the corona units when the machine was moved.
As long as the corona units aren't that old, cleaning them should take care of your problem.
Product Name
https://kb.mykonicaminolta.com/img/viewdoc_tab.gif
Looks like something is blocking the laser path of K. Clean the area underneath the developer unit and drum potential sensor. Also clean the laser slit glass with a lint free cloth.
Regarding the SSD board failures, Bulletin #: 9103 addresses this.
To disable power consumption, use these steps.
Menu Utility Administrator Settings [Enter Password] System Settings...
There was a Tech Bulletin (8865) that talked about a very similar problem on C7000 which stated it was caused by bad toner.
I had a 751 in a school doing this exact same thing, pulling developer around 40k right out of the box. Tried 250k PM kit, the Trans/Sep unit, new developer, new dev unit, drum with no result. We...