Search:

We are beating our heads against the wall on this WCP 65. We're trying to get the networking going. All the network buttons are greyed out and we're trying to print a Configuration Report and it's...

I need a to find some parts for a CF3102/CF2002. In particular, I need a control panel. Anyone know a good place to get these parts or anyone have any for sale?

Thank you.

Good luck and if I find anything, I'll be sure to post it here.

These machines had a niche for about 6 months before Xerox & Konica Minolta came in blew RISO's claim to having the cheapest cost per click full color. When people realized that the HC 5000 and...

I do not have the software for the EX12 but for the 250, I have ver 1.1 with 3 patches included.

I need PWS software for the WCP 245/255.

I have the following PWS to trade:
2060
DC 12-50
DC 2240, 1632, 3535, M24
DC 250 (Fiery included)
WC 32-40
WF 8825-8830

I need the control panel for the cf3102. Anyone have one or know where I can get it?

Have any parts for the MZ 790?

We have been getting inaccurate colors on our 3535 and when we did a color calibration and pullued up the values chart the colors were way off target. The black is both below and above target, the...

If you are "cleaning" the waste toner bottle and NOT replacing it, make sure that the window on the waste toner bottle is clean and clear as well. If not, it will still detect that the bottle is...

Try putting in a new Image Roller.

We just replaced the whole unit. It may have 20k copies on it, no more.

Ok, we tried pretty much everything as suggested. It seems to be that its not getting enough toner, maybe from the bottle to the developer module.

Any chance there could be a clog somewhere...

Here are some pics of what the coverage looks like.
http://img.photobucket.com/albums/v441/PantherPowa/245-1.jpghttp://img.photobucket.com/albums/v441/PantherPowa/245-2.jpg

We checked that and it looks fine. Our problem is mostly on the bottom corner of the page where toner isn't being distributed evenly.

Any other thoughts?

Did you get your network going? We had the same problem with one of our DC3535's and turned out the network card went bad.

We have a Xerox 245 that is ghosting images on the front & back. Before it was just ghosting on the bottom of the 2nd side which we eliminated by darkening the image quality but that is no longer...

Make sure the IP address on the Fiery is the same as the Copier control panel.

If you need to reload the Fiery controller, you can download the software from Xerox website and install thru the...

We're selling this Workcentre Pro 90. Xerox Workcentre? Pro 90 All-In-One Printer - eBay (item 110450800178 end time Nov-03-09 11:50:44 PST)

yea we tried the internal adjustments, didn't work. Thank you for the help.

It seems we are having a problem with the LCD control panel screen slowly fading. Any help please?

Hi Milo, we got a new 3535. When we booted it up, everything was fine but said to change the drum cartridge. We did and it seems as tho the wrong replacement cartridge was provided. We replaced it...

I need a tech with PWS to service our DC 3535. We are located in Charlotte NC. Call us at 704-333-3977.

I have a DC 3535 with Creo Rip and I need to color calibrate it.

Is there a software feature in the Creo to do this (I've looked everywhere) or what are my other options.

Thank you.

We are looking for a Xerox tech w/PWS to service a couple of our machines. We are located in Charlotte, NC.