The '03s are completely different!, Cleaning unit is on the top! I guess the answer is no then!?
Type: Posts; User: CanadianKiwi
The '03s are completely different!, Cleaning unit is on the top! I guess the answer is no then!?
Anyone know if there is a Printer Equivalent for the Transfer Unit for the '03s?
Cheers
Pressure Roll comes with the bearings as a unit. Only 4 parts to rebuild these. Fuser sleeve, PR, and 2 thermisters.
The sensor under the black plate on the bottom of the machine on the right is probably out of place.
Log in WIM and see if it shows SC202, if it does you'll have to change BICU and Polygon Motor
Turn off duplex and program as default.
The fusers in these are crap. Worst design Ricoh ever came up with. Replace the fuser.
I seen the white idlers on the older models create some squealing noises. These are on the upper cover. Not sure if the '02's are the same. Then again may be just a NZ problem....
SP3 101, 13 -16 is the Near End Alert, I think they are defaulted to 10 grams of toner, change this to a lower number.
Try using epoxy first! Changing a drive unit is a job to avoid at all costs.
Replace Power Supply, reset error code
Log into WIM, check scan transaction log.