Looking for some info on this issue please .
We have ordered : ejection flap drive assembly. A7W93-67049 standard output bin. Part number: A7W93-67048
Any help appreciated
Type: Posts; User: bollard
Looking for some info on this issue please .
We have ordered : ejection flap drive assembly. A7W93-67049 standard output bin. Part number: A7W93-67048
Any help appreciated
Hi all , looking for an up to date drum cheat sheet ./ cross ref data
I have the old one looking to find out re :: mpc3003 series can i use black pcdu' for colours ?
I understand i will need to...
Hi I'm hoping for some info re issues I'm experiencing.
Had the HDD fail and was unable to format , since replacing HDD (rear) the machine now comes ready.
It has paper cut loaded onto the...
more info pls
TASKALFA : Did you get to the bottom of this issue .
I have 2 fs 4100's doing the same thing intermittent jamming on exit , no damage to paper image in correct place (so not reg clutch) .
...
I too am suffering this code.....
carried out the above to no avail:
Checked stats, lamps, replaced all t/h's tested all but had them to replace.
To no avail.
checked all connections in...
Hi I'm looking for information on the main motor drive board fuse (it's blown).
250v 12amp glass 20mm
Part number for board or fuse not listed in current parts manual .
If anyone can shed some...
Unfortunately not :) first thing I checked ....
Thinking about replacing the feed unit as it contains the sensors etc , if that fails the PCB on the rear of the main unit. Cheers.
I'm looking that way also .. however my issue is the tray 3 (right hand tray ) lifts and then drops slightly , the machine sees the tray as ready however jams and fails to feed . giving j0253.
I'm...
All paper tray motors are fine and all trays feed .
All resets done no paper tray icon shown still .
Still no duplexing from main sub glass .
no event errors to refer to .
Next move is clutch possibly motor as well.
Yes all set correct.
Kyocera taskalfa 4501i.
Missing paper tray selection box altogether ?
No duplexing from main scan glass either ?
Reset 024 , firmware downgraded/upgraded,reset 906. All to no avail...
Anyone...
300GSM cardstock will not feed mp tray (settings been played with etc.)
This has worked up until today , rollers changed to no avail ,feeds everything else but not the 300gsm which is at the peak...
Yes the arm has also being changed including all sensors !
Remove paper from finisher shift tray .
Appears only on A4R when stapling to the shift tray ?
Replaced all exit sensors , drag roller assy sensors etc.
It appears as the paper enters the...
Its' a PRO 907EX it appears from the fuser drive area which i have just stripped and cleaned anyone had issue with fuser drive ?
Having a bad day of it !
It appears from the machine i beg your pardon.
Anyone have any info regards to noise /screech ..
It's very intermittent only occurs running booklets but the noise is not from the booklet maker !
I'm unable to reproduce the noise using...
Got issues on and off when doing booklets only , saddle stitched .
Stripped and cleaned all main rollers within booklet maker to no avail.
Anyone had issues with the BF730 units ?
Hi although an old thread , I've had complaints of toners running out although they have some left in bottle ?
Also issue with Bypass not picking up paper roller looks good cleaned anyway , as you...
I have an Mpc 2051 with the adf 3050 which is giving issues with double sided docs.
On the return of document it wanders towards the rear of the ADF intermittently and rips the document any help...
Hi all hope someone can shed a little light getting J401 in finisher (sr5020) smc logging -146 entrance lag error , j401 listing entrance sensor does not turn off ?
tested sensor all appears fully...
The follow me software at the users end ie. server .
It appears even after all firmware upgraded, including java card I still got the issue advised to wind back the upgrade to the ringdale follow me software.