Old Post but I have posted online most of the HP Printer service menu pins here at this link. I think site has the most hp models you can find on the web!
Hope this helps someone in the future.
...
Type: Posts; User: Tonersniffer
Old Post but I have posted online most of the HP Printer service menu pins here at this link. I think site has the most hp models you can find on the web!
Hope this helps someone in the future.
...
OLD post but I have seen skew. The feed plate (black) gets popped out of frame and causes this. Hard to find the first time.
Hope this helps some one!
Tonersniffer
HP Reginal Service Manager dismissed it as normal.
HP is having me replace every PCB in the machine plus wire harnesses for this noise. Noise reoccurs after/at idle about almost 2 or 3 min. I believe it is a transformer noise on PCB LVPS or FDB-V1...
Updating if any one want to know. I convinced the bank to run a heavier paper than 20 lb. The only way I was able to fix it. Machine was by a open door sometimes and the humidity would curl the page...
New, out of the box, when she first complained it had 3k prints.
I had the same problem with a XC 2230 which I believe is very similar to your machine. Indeed the transport belt after the fuser was the issue. After yanking off the plastic top cover with the...
Has anyone found a way to stop double feeding from standard paper cassette other than telling the customer to fan paper? There is no double feed prevention on this model other than gravity.
...
Sharp MX 3071
Customers complaining about clunking noise when turning it on or coming out of sleep. From what I'm seeing in the manual the fixing roller (with lamp and belt) would have the flat...
Same problem here. I have 2 MXC357F. Wish me luck! Line condition I used didn't help.
Right Door assembly fixed it, if any wants to know. Parts used:
CDAI-0176DS52 Qty: 1Sharp ADU PRD Unit
CFRM-1389DS56 Qty: 1
SHARP FRAME
RMOTS0925FCP1 Qty: 1
Old Post but, been there done that. Take the quickly removed exit tray then top cover off exit side of the paper. Turn the power on and if the service sled (sled with cleaning felt belt) doesn't...
Or do I need to individually order the drum, blade, and primary corona for the MX-5070v
Sources that I have conflict each other
Thanks for your help
tonersniffer
Phil,
Jam code is in my post. Cleaned all rollers. It does it 50 or so copies. When I get on here it is because I want experience not a #_#_&#-# lecture.
Thanks for you word of wisdom....
Duplex jam paper is found inside duplex door stopped at last set of rollers in the right door duplex. I hear a grunt right at the time of the jam. Other sheets are: 1 is just out of what ever paper...
Only time I saw it jam, the paper jammed all over but the paper that was exiting into the stacker unit on external finisher hit the very same exit gray rollers (4 on shaft). Called HP they sent me...
Thanks for verifying that for me Arnh79!
I have a customer who wants to know if their emails are going through properly. I've looked everywhere on the web interface and on the machine and cannot find a email log anywhere.
I can find or...
I'm stupid. 30 years into this and I still forget the basics. On the customer screen it says reinsert black toner and restart device. I immediately think that the OM toners the issue (because mine...
Customer bought one of these. She says has been running her own non OEM toner since the start. Now it says, "Non OEM toner" like normal, but now also states something like "Replace toner, turn off...
Thanks Furniture polish resolved it.
Issue from day 1 of use. see attachment. Before I blame paper, has any seen this? Any suggestions?
45082
Also any one know where this goes?
45083
Thanks for your help!
It is not jamming when using tray 1 or 2. We got this Toshiba when we took over service on this bank. It is these gears I adj the spring but noticed a free riding sep roller which was odd. The...
Replaced rollers with new style rollers (clear not gray rubber). Any Suggestions. Sometimes pulls a lot of multiples. Part Numbers would be handy if you think something else should be replaced.
...
Thanks black cat for all the help you've done on this forum for years and years. You are the best. (Do you see how that works you got to build them up first before you get on them.)
No there's...