I have had my share of mishaps, but the two that always come up is I had a customer paint the entire office building and installed new carpets, I walk in empty the waste toner and massive toner spill...
Type: Posts; User: RicohTech_TurksCaicos
I have had my share of mishaps, but the two that always come up is I had a customer paint the entire office building and installed new carpets, I walk in empty the waste toner and massive toner spill...
user tools/ system settings/ interface you should see a section where it says ethernet speed auto with options to change it to 10mbps
* It is mentioned briefly in the network section pdf of the...
Fusing unit set error, check the connections on the fusing unit for pinched cables.
You are welcome let us know how you made out.
I have a customer large insurance company who has several of these and I was having the same problem on one machine i was finally given the go ahead to replace the entire fusing unit.
but on the...
B178/B180
PM 60k
Development
Dev. Unit–K R
Dev. Unit–C R
Dev. Unit–M R
Dev. Unit–Y R
PCU R x4
Ken,
But he mentioned it sometimes reaches the destination.
Try changing the network speed from 100mbps to 10mbps on the machine
Looks like you need
B214 2302 Photoconductor Unit
G070 2110 Charge Corona Wire
G070 2156 Charge Corona Grid
Apparently we cannot help each other out because everything is copyrighted down to my shorts as well. So I had to remove/delete the links I don’t condone illegal activities, if you tend to disagree...
*Update the problem has been fixed replaced the controller with one from the R&R list,and also replaced both memory dimms the 256mb an the 128mb everything is working smooth., thank you all for...
Yeah tried that no luck ordered a new controller and memory ran out of ideas so I will change out the parts and hopefully put an end to this repetitive problem.
Tried that already reboot the machine will work for a few days and then it comes back again. I notice that when it does come back someone has stored a new doc on the doc server not sure if this has...
Copies are fine, it' just scanning
I need some thoughts on this. I have an account that has a 3260c scan to folder and they also use the doc server. Lately the scans are coming through as colored lines or bw lines nothing can be made...
If this machine has the print scanner option unit then I would think there is something wrong with HDD and or memory
On the pro906ex Raid SATA 160gb drives. I have replaced them with 2 same size Western digital caviar drives Model wd1600AAJS and formatted them and had they worked fine.
Counter sheet comes out nice and dark? Did you cleaned the laser shield glass?
Well ask yourself this if you feed the original from the glass and select tray 3 what is your result if no problem.
Then I would say look at the sensors make sure nothing is blocking them (paper...
I thought I was missing something I was like hey if it's listed perhaps is possible on this unit so I went out today to see and I was like ok there's no entry for @remote in the web image monitor nor...
I came across the brochure for embedded @remote I just realized that is says the aficio 2027sp is one of the supported models either that's an error or im blind in sp mode 5816 sub doesn't have...
Let me ask you something if I may
have you checked to make sure the standard fence is still intact?
B830 4957 Standard Fence
and also none of the springs are missing from the
AF02 2147 Driven...
Anyone happens to have the parts manual for a lexmark t634
if so can you upload it to mediafire/rapidhsare or any of the free hosting sites and post me the link so I can download it.
From my understanding the problem has been fixed and he ended up replacing the sd card and the hdd and the problem disapeared. I did tell him about the Firmware
Experienced Ricoh Tech looking to relocate. I am considering Florida, South Carolina (East Side), North Carolina (East Side)
I have the following Certifications:
Comptia Net+,
Comptia A+,...