Hi all.The controller was the cause of the problem.Part no.D0415742.Thanks to everyone for the feedback.
Type: Posts; User: srv
Hi all.The controller was the cause of the problem.Part no.D0415742.Thanks to everyone for the feedback.
Thanks for the help guys.I'll check out what you advise and let you know the fix.
Thanks for the reply.If it is the reg assy would it not happen on single sided as well as duplex?Also,is there anywhere to download a theory of operation for this machine as the manual isn't great.
Would this stop the machine from heating up as nothing at all is working bar the led lighting.
Hi.I have an mpc 2050 that ,when switched on the machine doesn't do anything. The led above the soft power button on the Rhs of the operation panel is the only thing that is lit.The pwoer supply has...
Hi all.I have an ir 105 with inermittent registration problems but only on duplex; from lead to trail edge direction.The reg clutch and roller had been replaced a few months ago for reg problems on...
Thanks for response teckat.Advised customer to get decent quality and will take it from there.
Hi guys.I have an ir 3035 that is jamming in duplex.what happen is that after the first side is printed and the paper is coming up to the drum to print the second side the paper gets caught in the...
I agree,I have had 2 m/cs doing this and it has been the motor/clutch.
Is this happening when printing,copying or both.The reason I ask is because if it is only when copying it may be condensation in the scanner area.By the time you take out the drum and wipe it dry the...
Definitely dev clutch and I wouldn't recommend a diy If your not in the service game.
Thanks for all the help guys.I haven't heard from the customer since my last post so I'll keep my fingers crossed.If the problem is gone,great!! but I hate not nailing the fault as something definite...
Thanks for you reply.It jams on copying also.I had the luxury of replacing the finisher from an old junk machine they had on site and the copier is working at the moment but I am not confident(even...
Hi Guys.I have an irc 3380 intermittently jamming.Most of the jam codes are for 0D91(paper size mismatch).All the size indicator dials are set correctly and the copier will jam copying and...
I fixed the same fault thanks to you.Cheers.
Hi all.I have a machine showing this code after about 10 prints.The manual mentions a seperation fan{fm8}in tray 5 of the pf 601 unit.I have ordered the fan but I am not that familiar with this model...
Hi guys,I replaced the switches and the machine is working fine.Thanks for your help on this one.All the best.
Machine back working.Our guy fixed it by removing cables from ccd and re-seating them .He is not familiar with the m/c and had no manual to work off so well done him.Thanks (as ever) for the input...
100% right.I thought I had replied with a thank you before christmas but obviously not.So here it is THANKS A LOT.MUCH APPRECIATED!!.I fitted the mods and haven't heard anything since.
Hi folks.I have an ir 6870c showing an Eooo225-001.The manual mentions the scanner lamp.One of our guys swapped the lamp with another machine and the board supplying the lamp but no joy.This machine...
When I started in this business in the 1980's one of my first calls was a dev change on a mita machine.I dumped the old dev in to a black plastic bag I thought was the customer's rubbish bin.It...
Thanks for the reply blackcat.I will order the switches and some springs but shouldn,t the switches register when testing in service mode(or at least one of them)or is there a problem with faulty...
Hi there.I have a km 5050 jamming from tray2.The customer has been complaining about this fault for the past 2 weeks but every time I called I couldn,t get it to jam until I saw it happen today.I ran...
Clutch ,and I wiould do all 4 while you are at it,
Thanks for the response guys.The transfer belt was at 277%.The m/c was working when I arrived at the call but I swapped the belt with another that had 70% life used on it.When I put the older belt...