I was able to get the original belt back in the machine and no error code with printouts - Im guessing the Richo guy got the belt model wrong. Ill confirm next week and update with which model of...
Type: Posts; User: Bearl
I was able to get the original belt back in the machine and no error code with printouts - Im guessing the Richo guy got the belt model wrong. Ill confirm next week and update with which model of...
Thanks for the reply's guys, much appreciated.
I'm hoping that the IOB hasn't fried, unfortunately I don't know if this error was coming up before they had the belt tear.
It was a new ITB unit,...
Hi guys,
I have a MP c3002 which originally had a sc-441 error which was caused by a torn belt. I got a replacement belt unit in, but it was for a SPC820, which a Ricoh tech told me would work in...
Sure did it still left marks on the page. Got worse when I did colour.
So an update, I was able to change the back plate over with the cyan dev tank and swapped that and the black over , block up...
Thanks Moose! I know you guys are saying dev unit, but I'm not sure how it could be that when there are no strange marks/anomalies on the mag roller. Shame I cant swap the colour and K dev around...
Hey Greg, I'm in Australia, we only run A4 here, but the orientation of the paper in this machine only goes in the A4-R direction. I was thinking blanking lamps too but as far as I can see on this...
Nah, fuser is mint. The mark is on the the drum cylinder before it goes onto the transfer belt. Nice try through 😜😜
Okay i pulled the k dev unit out, popped the cover off, couldn't see any build up on the blades. The dev looks great on the mag roller, no disruptions, blemishes
When I look at the black mark on...
Okay Thanks guys, ill have a look at the dev unit a bit more closely, ill keep you posted!
I haven't. I have removed the dev from the mag roller where the lines are and its in good condition. There is a good consistant toner brush across the dev roller though.
Thanks for the reply Bill, sorry I didn't write that correctly, the problem doesnt move with the drum, i can put any color drum in the black slot and the line stays in the same position.
I wish it...
Hi guys,
I have a strange issue with a Sharp MX-C300w mutifunction machine.
Bit about me, I'm an experienced tech been swinging the screwdriver for 20 years, worked for just about every brand...
Hi guys,
I have a customer who has a c4300 which has had sticky labels go through the machine. I believe they may have one stuck in the transfer belt cleaning assembly causing marks on the...
**bump**
Hi Max,
The catcher blades on the dev units are getting on a bit old age wise rather than copy wise. The machine has only done 450,000 copies but its a few years old now (10+) When I check out the...
Hi guys,
I have the **fortune** to be looking at a bizhib c6500 machine which started leaving yellow spots on the pages. The customer hasn't been following the maintenance scheduled so looking at...
Hi guys,
Im having trouble getting a part number for the triangle shaped paper lift gear for a C2201. This gear is located on the rear of the paper tray (tray 1 to be exact) and is triangular in...
Hi guys,
I have a canon mf9220 which had a broken slide lock lever. I have replaced the lever, but when I removed the main drive assembly it appears that I stuffed up the timing on the...
Hi guys,
Thanks for all of the responses! Its very much appreciated.
I did have the model number slightly wrong, Its the 500ci machine. These machines were purchased very cheap at auction...
Hi Guys,
A customer of mine has bought a couple of cheap Taskalfa 500i's.
I have been setting them up and they wanted to replace their existing fax with one of these machines. Yeah no worries,...
Thanks for your help Bicyclerepairman your a legend! :)
Hi Guys,
I have a customer who has a 281c which is jamming on the exit. It appears that the exit rollers have been baked by the fuser over time and they've gone really hard. If you grab the paper...
Hi guys,
I have a docucentre II 3005 in the field which has broken the sensor flag that sit above and behind the fuser. Can anyone help me with a part number or a parts guide for this machine?
...
Hi Guys,
I have a 2301 machine in the field which is leaving streaks that look very much like drum lines. It started with the black so I rebuilt the drum using the sharp kit, no problems.
Then...
Thanks Canon.tech I'll be sure to check that one too.
Cheers,
Brad