Thank you for the reply, but there was no HHDD on the controller, yes possible is the firmware thank you for enlighten me.
Gregorio jc
Type: Posts; User: gregoriojc
Thank you for the reply, but there was no HHDD on the controller, yes possible is the firmware thank you for enlighten me.
Gregorio jc
Hello Guys
Im stuckup in KM Bizhub 363 as I turn on th emachine and start on the display is showing the hour glass after 15 seconds
the screen became black and starts again showing an hour glass...
So it means the machine did not recognize the sd card or the fw are not in correct folder or correct file type
which folder did you put the firmware and what is file extensions.
pls. tel me which firmware version in the machine now
Ok thank you very much, I will check the cables and wiring:)
Any one can help me pls. the xerox 5675 when put on the display is showing''system anavaillable. do not power down untill message appears'
and then after a while is showing " communication error"
...
thanks guys,
I will try everything you told me, going back to cutomer place right away
gregoriojc
As soon as the power put on, this paper jam showing immediately16108and I can not enter to program mode
Hello Guys,
I am facing a problem on Konica Bizhub 600 it is showing on the display "a paper jam has been detected remove the missfed paper according to the guide"
Pull out te adu unit. open...
:cool:copiman Your angels from heaven thank you very much any thing you need from me about RICOH, GESTETNER, REXROTARY
you can ask me direct.
again thank yo very much
gregoriojc
hello to everybody,
Please any body can help me to adjust the brightness of the Panasonic DP-C323
I check in the user program but did not found I go program mode but I did not found also...
Can you help out this error on Toshiba 600 error 449
I replace the web roller but I dont know how to reset the web count.
Pls. help me.
ok thanks,
I misunderstand the request of my technician, its how to enter to service program mode and reset the fusing pm count.
thank you
gregoriojc
I agree with Eric 1968
I face the same problem ,do the same procedure the problem was fixed.
Bro'
your problem was on the firmware, you must upgrade the firmware Ricoh japan had announce this problem. there are some bugs on the software . pls let me know your machine firrmware version
I...
Bro' I have 5 machine showing the same problem all of them I replace the power supply and solve
the problem. only problem psu is expensive.
good luck
Pls. help how to enter in service mode for panasonic dp c232 and reset web count.
thanks,
:D:D:D:Dno need customer will do just watch and listen a big bang from 7th floor machine hitting the ground:D:D:D:D
"Your Machine not good take out from here or i will throw in the window"
Reaching customer place found out the the ac plug is out:eek::eek::eek::eek::eek:
ok thank you very much, i will follow that one
thank you again,
gregoriojc
which version of controller firmware you have, so i can send you the right one
Greetings to everyone,
I have toshiba e-studio 455 showing CDF0 error, Please let me know what does it mean and what should I do , thanks
gregoriojc
thank you very much and have nice day
now I can reset my long time problem
more power to you guys
Please help me to go on to level 2 programming on canon IRC 3200
thanks,
I have thesame problem on mp9000/mp1300 light copies after around 10,000 copies I upgrade the firmware to version 6.04
but nothing happens, now i send a report to ricoh about this problem and wait...