Did u replaced the 2 long screws with 2 normal screws? , is a buletin about this issue , very old .
Type: Posts; User: whitecat
Did u replaced the 2 long screws with 2 normal screws? , is a buletin about this issue , very old .
I would like to test it too
if any1 has i would really apreciate it . Thank you
mailinactiv@gmail.com
Thank you , srry for comeing so late with a response. Problem is that we have to implement a solution , equitrack , and IT support sustains that EQuitrack can be installed only on machines with...
Hello , is posible to use remote operation panel on this machine ( mpc3002)? if so , how to enable it ? Thank you.
Counter? how many pages has the pcdu and dev unit? upgrade firmware?
put some toner from bottle into developer unit ( about 2 spoons ) .
do about 50 prints , c if quality changes
Happens even if you print one side?
If happens only when using duplex , clean all rollers in duplex ( paper gets like that because it doesnt get in the fuser straight ) Also check if the white ...
Connect lap with cable , firewall off ,antivirus off ,wireless off.
Happened before to me , it was the contacts for the chip from toner bag, they get clocked with toner .
Hello i have a mp3054 with less the 100k copies with latest firmware. Randomly the machines gives : paper missfeed inside of device ,paper missfeed duplex unit , reset correctly BK PCU , reset...
Is very important to use the proper springs for strippers. Idk codes because it happened a long time ago.
( proper = a lilttle bit stronger springs , so it will be a lil harder for the paper to...
1/ connection problem , double check and use contact cleaner everything related to laser ( specially wide cable with many contacts)
2/ crushed cables
3/ firmware upgrade ( why not ? :P )
As the title say i need advice for multifunction a4 color , can be new or second. Pls dont tell me mpc305 , 242 thouse r junk.
Any thoughts about the new 406?Other brands(model)?
Thank you.
I have an 5503 ,basically its a 3003 "on steroids" . For fuser and pcu`s u need to make little maint every 30k-50k Mine has close to 1mil . I want to ask if your pcu gear (witch is rotated by the...
Disconnect scanner from machine , and give it a try . SC`s on this machine are misleading . Who made the service manual has high/drunk, idk.
When developer loses properties , u have toner scatered inside the machine , developer unit is very dirty .Its also good for pcu to have good developer .
Check fuser for iregular line, for grey vertical line check transfer roller (electric leak)
I think its a problem from image "creation" So , clean the itb ( image transfer belt , take the belt and cleaning unit out , compress air on rest of it ) but most likely is the pcdu ( the...
For mp C4500 latest firmware didnt fixed scan to folder on win10 ( i guess is the same for mp ) . Maybe clients accepts scan to mail or you make a ftp config. Good luck
music ( 2111 ? c/b/a)
check and double check all conections , use conection cleaners (spray). the machine doesnt recive " feed back ready " from the binder . good luck with the "coffin" :)
Happened 1nce to me too , It was the side door ( fusing door ), didnt closed properly because the fusing lock system wasnt properly locked ( the 2 small levers , lock fusing into place ).
Good...
5503 has 2 lamps 3003 has 3 lamps , the sleeve itself is longer with about 2cm for 5503.
Dude is Christmas not 1st april 0.0. My mpc6000`s also work fine for 500k pages, but then i wake up and i realized it was just a dream.Maybe u wanted to say 900 pages, ok then :))
Image Transfer Belt D0296090 for mpc2800 ,i need fusing transfer belt for 3002, the fusing belt is very diffrent from 2800 .The fusing belt is compatible with 3001?
Proofing Material D0294169 is for...