Anyone have any experience or feedback on this power filter?
Welcome to Smart Power Systems
Looking for pros and cons
Thank You
Type: Posts; User: lvsb
Anyone have any experience or feedback on this power filter?
Welcome to Smart Power Systems
Looking for pros and cons
Thank You
zFTPServer Suite - the best replacement for the built-in Windows FTP-Server
I have setup scan to FTP using this utility.
I have 2 units with the same issue. We have changed the drum units and HVPS still no joy. Currently we have the cartridge tray on order. I can reproduce the issue by shorting the charge contact to...
Try to disable dial tone detection using Maint. Mode 660.
Any Toshiba dealers willing to sell parts to a Kyocera dealer? We sell and service the Kyocera TA550/650/750ci which I think is the same as a e-studio 5520.
The replacement parts thru Kyocera are...
What I mean is I replaced the drum and HVPS but that did not resolve the issue. What did resolve the issue was replacing the Dev unit.
Had this problem a few months ago. Replaced drum unit and HVPS but a dev unit fixed it.
Good Luck
a SC819 could be caused by a defective fax option, memory or HDD
C6400
Zero-crossing signal problem
• The main PCB does not detect the
zero-crossing signal (Z CROSS SIG)
for the time specified below.
At power-on: 5 s
Others: 5 s
I agree with bsm2 mainboard. We had this issue a few times.
Owl, I know all about the Data Overwrite Kits.
However the issue is when we sell a new unit, the machine we pull out might not be our product(different company/manufacturer...) and the customer...
It has been awhile but I think the password is sysadm
With all the recent media attention about copier hard drive security and storing of sensitive data. I have been tasked with researching what manufactures/models the hard drive can be formatted...
The user tools setting is for print mode. The bypass will not auto detect legal.
Definitely memory
disable dial tone detection with user parameter switch 22 bit 0 set to 0.
Execute Copy SP 5846-50
the print heads are not a serviceable part.
If the heads are clogged check the maint. unit it may be full of dried ink which will cause issues the the print head
doing a full PM is half correct, check the laser power SP 2103(i think) if the values are near the max range then the right door switches are breaking down under load and effecting laser power which...
If you checked the PCU and connections and they are OK, then you have a failed High Voltage Power Supply
Totoro,
Sorry incorrect SP number, please check SP 5846-43.
This SP with indicate where the machine is looking for the address book.
The 2035/2045 series don't support envelopes.
Eric
What is SP 5845-43 set to?
Did you try SP 5846-50, 5801-3, and 5801-3?
40,000 D size prints
What are the Vsg/Vsp/Vt/Vts readings? Double images are a sign of overtoneing. The 3 main causes of overtoneing are: poor drum ground, dev bias, queching lamp.