yep, we informed Konica and they said that they know about this issue. There is no solution at this moment. Just replace the belt.....
Type: Posts; User: Patish
yep, we informed Konica and they said that they know about this issue. There is no solution at this moment. Just replace the belt.....
here for your dino :)
E54
Fusing Error
· The temperature detected by the thermistor does not
rise more than 20 °C within 12 seconds when the
fusing lamp is turned on continuously while the main...
Yep, had the same one. Copier has the latest FW. After resetting 1902 and inserting the previous value copier was working. The web motor/sensor replacing didn't help. I cleaned the fuser's plug and...
try unplug/plug all plugs on system/logic, 08-665, HD+FW
check your PM
That was my fault. :) I thought the "cover page" literally means "page" but it only adds the header. Yep, the solution was in the driver. I have enough customers that using network fax. But this was...
it's 140Mb. :)
If you have access to https://topview.toshibatec.com , you can find some training material in the "WebSteps" .
I've installed net fax and everything is OK. But there isn't customer ID on the top of the page when the fax is received at the other side. The driver has option called "cover page" where I can fill...
Try another CCD.
Use the parts catalog.
Copier is already connected to the inner network.
I'm going to say them just use a disk-on-key. :D
The only thing that I've found "SP 5801-011. This resets the network password to “password”.
I didn't find the PCU unit #. There are two parts: B065 2270 - Upper PCU Ass'y
B140 2260 - PCU Lower Ass'y
Heh, customer has two separated networks. From the inner one they print from different PCs through the LAN. The inner network has no gateway to the Internet. The box that has access to the Internet,...
This one
I've attempted scanning through the USB but no luck. Ricoh has no TWAIN USB driver for this model. Is there a compatible driver ? :confused:
Af-1060
Format the HDD 5-832-1, download the stamp data 5-853.
Is the transfer unit's entrance guide (B065 3955) in their place ? Check the motors by using the "Output check" code. Attempt put a paper before reg. and by rotating the reg.'s knob check the paper...
Do you work for museum ? :D
Try to get to User Menu. If my memory serves me well, push yellow button then press and hold red "C".
Try switch coper's "network speed" to 10.
It would be reasonable connect laptop instead coper. Turn on DHCP and check your IP. You could print HP's configuration page and look at net parameters.
Set 5-912-1 to 0
Chances are a problem with IO board.
The FW update wouldn't hurt.
slowly but I can login ;)
The fw is on the eprom.
There's no way for update besides replacing the eprom.
I don't see E-8 error in the manual.