Thanks I suspected but was hoping there was some way?
Customer can scan them bac in if they need them.
Cheers
Type: Posts; User: madas
Thanks I suspected but was hoping there was some way?
Customer can scan them bac in if they need them.
Cheers
Hi guys
Is it possible to copy mail box files to usb stick on 5000 series and put them on new 5560?
Customer has heaps so I printed them out just in case not an option.
Cheers
Les
Do an A3 test chart I think 5 or 6 grid and jam the machine by opening the door and check image on the belt.
also try each colour individually if you have not done that and see if it is just one...
Agree on the ITB cleaning blade flip! You will soon know when you check it, the belt will be covered in toner usually bands of colour.
Madas
Got a sample of the test page?
i have had where the bars are up n down to each other or high on say cyan and magenta ok that sort of thing.
I did a dc con reset and did the trick!
just my...
Thats faded not blurry! Well from what I see.
stick a drum if you can from a known working machine and see if the fault is still there.
i would try another drum if I was you.
madas
Check the send log and details of failed ones, what is the error code it will help you identify what may be happening?
also try browsing to the folder from the machine, might just need reentering in...
Agree with copier tech, could be tx cleaning blade check its life in drbl1
madas
Just had a 5000 series do the black screen green light and it was the main controller pcb.
Les
Tried like and thanks but did not seem to work so doing it this way.
Thanks OINF
I adjusted the spring to a soft setting and got 140plus pages no jams.👍👍 only getting a few before.
Cheers bro I hope Ican helpyou someday.
Les
Thanks for the reply OINF the unit was from the same machine just a less used tray.
Very interestling last part about the spring I will look in to that and report back.
Cheers
No prob's just make sure you get ends of the blade under the mylar.
Come on teckat! Need your wisdom please 🙂
Just change the blade and make sure you apply powder to the belt and rotate it to lube the blade.
unless the belt is causing CQ issues leave it.
Les
Hi guys
Have this machine giving jams from one tray, I have had the same on another machine c7065 same feed units.
the paper looks like it starts to feed but seems the feed roller does not turn and...
Mmmmmm interesting question!
I am no expert on Canon but maybe look at fuser % on 7260 exspensive to replace, here anyway.
Its a bit like buying a second hand car, until you use it for a while...
Had similar and had to take laser units out in the end and open it up and clean the mirrors manually, in a metal factory. So if you are in a dusty enviroment and only used the blue cleaner I would...
Hi Doug
Colour or b/w? Had one do double was the drum in this case cyan.
Also had drums do ghosting like a fuser repeat image drum width across the page.
Les
Hi
If all the drums are that high I would suggest changing them all. We have had quite a few where you change one faulty drum and the others then start giving lines. Some do it straight away when...
I had this and had to do a dc con reset which fixed it, that was near 2 years ago amd hasnt been in for any rego issue since.
I have had a couple where the fixng film grease has dried out and made a loud groaning noise? Unless that was the customer lol!
But yes clean around the edge and put some new grease worked for me...
Well im back
Went to fit the new drum and found that the one I had swapped over to yellow was the same as the original and the hopper was clogged up.
what I noticed after removing the yellow drum...
Hi Doug
take the lasers out and clean them, remove left cover unplug them remove the plastic clip that holds the ribbon cable and metal clip then slide them out.
Beware when you put them back make...
Ok Guys
this what I found, after it coming back in this morning I looked at the wiring harness that Canon suggested.
too do that I removed all the drums and found that the yellow chute going to the...