Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 1.42 seconds.

  1. Replies
    8
    Views
    170

    Re: Paper Registration buckle adj ?

    Isn't that a DragonII?

    I had a DragonI that the customer used such poor quality paper that the registration paper dust collector was packed solid in a relatively short period of time. It would...
  2. Re: HP E7 and E8 Laserjet series background at run up

    Monocomponent or dual component? Are you sure it's not detoning of the developer that resolves the backgrounding issue? Back in the day, when we changed the developer on analog machines, we had to...
  3. Replies
    3
    Views
    152

    Re: 3252ci Wrong Paper size

    That's the first thing that I would change. Kyoceras Auto Paper Detect accurately when set to Auto Inch or Auto Metric (for metric users). They will not print faxes to trays set to a specific size,...
  4. [CQ] Re: Kyocera TaskAlfa 3050ci - Colors Denser Near Edges

    This machine is compatible with a Fiery, but it won't help very much. =^..^=
  5. [CQ] Re: Kyocera TaskAlfa 3050ci - Colors Denser Near Edges

    This machine is not a good choice for a printing business. Color accuracy is mediocre at best. For a printing business you'll need to have a Konica Minolta C754e, C658, or PRESS. The Kyocera will...
  6. Replies
    8
    Views
    170

    Re: Paper Registration buckle adj ?

    It might help to know what model you're working on. =^..^=
  7. Replies
    10
    Views
    431

    Re: Falcon 2 Open Drawer 1 message

    It's probably too late to stop you from doing this. What usually happens is that the shorted lift motor that damaged the drive circuits for tray #1 is then shifted to tray #2 and damages the drive...
  8. [CQ] Re: Kyocera TaskAlfa 3050ci - Colors Denser Near Edges

    Congratulations on looking closely enough to see that. Every color Kyocera up to the AlphardII series does this. Two of the adjoining sides are always darker and crisper than the center and opposite...
  9. Replies
    10
    Views
    431

    Re: Falcon 2 Open Drawer 1 message

    Is there a jam code stored? =^..^=
  10. [Misc] Re: [Various] multiple authentication units on one machine possible?

    I think you'd need KM to write you a special firmware for the purpose. =^..^=
  11. Replies
    3
    Views
    190

    Re: Oki supplies failing

    It's been a while since I've experienced this, but I seem to recall that the counter must reach end of life before you insert the new unit, otherwise it won't reset the counter. We had a lot of...
  12. Replies
    2
    Views
    137

    [Error Code] Re: Sharp AR-M550u Error F2 only

    If you check the error log you'll see the rest of the code. =^..^=
  13. Replies
    13
    Views
    383

    Re: Toshiba 4515AC E712

    Have you checked the sensors individually in 03 mode or from pinouts of the RADF controller? =^..^=
  14. Replies
    4
    Views
    180

    Re: e455 paper fold mark

    I believe these are the loop settings that I got that worked well:
  15. Replies
    12
    Views
    621

    [Misc] Re: Bizhub C451 - Paper curling

    Did you try fresh paper from your own supply? =^..^=
  16. [Misc] Re: C454 - Paper comes out curly (approximately from the half)

    Congratulations on finding that. Only a tech could cause that. Such problems can be very hard to track down. =^..^=
  17. Replies
    8
    Views
    298

    Re: UTAX 3060i Dying

    The Stratos series are pretty reliable board-wise. I haven't had to change very many boards.

    Could you have a power issue? That would account for the synchronicity. Perhaps a visit with the power...
  18. Replies
    8
    Views
    298

    Re: UTAX 3060i Dying

    Sorry, yes U000. The CF codes often relate to print data errors.

    I suspect that the firmware will be the same as Kyocera and Copystar on the UTAX rebadge. It may help, and it may not. If your...
  19. Re: e-studio 255 256 and the like registration problem

    Another common cause of varying registration is a broken front door strap, or maybe an incorrectly assembled transfer roller assembly.
  20. Replies
    2
    Views
    201

    Re: C224e reset FW

    I seem to recall seeing it under Special Firmware.
  21. Replies
    8
    Views
    328

    [Jamming] Re: Konica Minolta C454e 30-03 jams

    What type of media are you using?
  22. Replies
    15
    Views
    570

    Re: Toshiba 2820c vertical banding

    I can't really tell if it's cyan drum not cleaning or the primary transfer belt not cleaning. The photos do help. You should be able to see this not-cleaning issue without much difficulty on the belt...
  23. Re: What is the dumbist customer comment/question you've heard?

    Yup. That's definitely your fault. =^..^=
  24. Replies
    8
    Views
    298

    Re: UTAX 3060i Dying

    U001 Error Log will print off your jams and errors. The will be error codes to help you determine what is happening. =^..^=
  25. Replies
    2
    Views
    300

    [Misc] Re: Toner problem

    Most of those old style developing motors got replaced a long time ago, but I suppose there could be a few still out there. =^..^=
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4