Search:

Type: Posts; User: tmw

Page 1 of 2 1 2

Search: Search took 0.06 seconds.

  1. Replies
    2
    Views
    212

    M551 clicking noiseAny

    I know the normal operation has a certain amount of ratchet & clicking sounds, but the customer thinks thereís extra clicking she hasnít heard before. Itís not all the time, just around calibration...
  2. Replies
    3
    Views
    251

    hp m451 seemingly recurring magenta on edges

    Went in to look at this roughly a month ago with magenta on the edges. Cartridge was almost empty, replaced it & everything was good. Went back a couple days ago with same problem. Cart had 30% left....
  3. Replies
    0
    Views
    141

    epson stylus pro 7890 error 1537

    Had to go look at this without knowing a thing about it. Error 1537, pressurizing pump. Book says check for bad connections. Reseated harnesses & checked hoses. Is there something else to check...
  4. Replies
    9
    Views
    579

    Re: mx-c401 cyan misregistered

    Sorry to report no more luck. Tried last part left, registration/quality sensors and the unit that drives it. No change. Will be replacing machine.
  5. Replies
    9
    Views
    579

    Re: mx-c401 cyan misregistered

    Thank you for your replies. I forgot to mention that the laser has been tried as well. The auto adjustments and the 50-20 defaults were tried also. Nothing much changing so far.
  6. Replies
    9
    Views
    579

    mx-c401 cyan misregistered

    We are now having to chase down ideas for this thing. It started printing what looked like color fringing on the rear side of the print. Our other tech was the first to look at it. He tried running...
  7. copystar cs 3050 trouble clearing grey background

    Hi, I'd like to run this by the kyocera experts. They are always throwing me on machines I don't normally work on. Outside of some other problems I came across and spent a bit of time get around...
  8. Replies
    3
    Views
    378

    Re: t2500 can't clear lines & bands

    Thank you Kiran. I'm impressed by your knowledge of these things. I feel like I'm on a need to know basis concerning the plotters. I might have gotten familiar with one, not seen it in a long time,...
  9. Replies
    3
    Views
    378

    Re: t2500 can't clear lines & bands

    I forgot to add, these are copies,which presumably would eliminate software. Firmware was also updated. Standard drawing plans look normal, & internal demo prints look perfect.
  10. Replies
    3
    Views
    378

    t2500 can't clear lines & bands

    Still have quality problem on this machine. Attachments are included. Printhead is newly installed. Ramps and valves motor replaced. Did all calibrations, alignments & cleanings that the machine...
  11. Replies
    3
    Views
    466

    Re: Hp t2500 canít clear lines

    The defect shows up when they print, and I saw it when I made copies. The internal demo prints come out brilliant like they should, though. I don't know how to post attachments, but it's so subtle, I...
  12. Replies
    3
    Views
    466

    Hp t2500 canít clear linesrintheadheadh m

    Called in with a line/streak problem. Thought it was odd since I just replaced the old printhead about a week or so ago. The sample showed alternating light & normal bands bordered by dark, thin...
  13. Replies
    3
    Views
    350

    Re: hp t1300 power problem

    It just shuts down mid-print. She says she just presses the power button, and it comes back on. I was talking to Eddie at LPT, even though I have found almost anything could happen, he says the power...
  14. Replies
    3
    Views
    350

    hp t1300 power problem

    I have t1300, customer says it shuts down at random while printing. No warning or error message. She says she can do many prints, or it will stop during the first one. I tested correct voltage from...
  15. Replies
    3
    Views
    488

    Re: designjet z3200 22:3.10 error shown first

    Thank you for your answers. For the record, inks are oem, and the diagnostic test only did about six items, then went into code. I couldn't get any meters from it.
  16. Replies
    3
    Views
    488

    designjet z3200 22:3.10 error shown first

    Still trying to make sense out of these plotters. It seems more often then not they don't like being fixed.
    This time it got a 22:3.10 error, ran diagnostics,got same error. Book says that means...
  17. workcentre 4250 trouble clearing jobs stopping print

    Don't normally work on xerox. Jobs in the printer queue seem to be holding it up. Made sure any jobs were cleared out of all the computer queues. One job said it had 600,000+ bits & was the hardest...
  18. Replies
    3
    Views
    435

    Re: es 450 problem loading hdd firmware

    Yes, that file is included.
  19. Replies
    3
    Views
    435

    es 450 problem loading hdd firmware

    Hello.Before, I have successfully replaced and loaded firmware on to new hard drives, but now it wants to confound me. I'm using a 2 gb flash usb, is formatted FAT, and has 450 firmware on it. I've...
  20. Replies
    3
    Views
    915

    Re: Help on colorqube 8570 91,720 error

    I would like to thank those who replied with their suggestions, although this machine is still giving me problems. I ordered and installed the sleeve kit as suggested. I was hopeful as a piece was...
  21. Replies
    0
    Views
    2,048

    xerox colorqube 8570 91,720 error

    I have a fuller description in the xerox copier section of what I did or didn't do to increase chances of being seen. Basically it gets a head tilt error about 11% into warm up & will reboot at the...
  22. Replies
    3
    Views
    915

    Help on colorqube 8570 91,720 error

    Was trained some time ago on tektronix 350,360 and worked on up to phaser 860. I have not seen these for a long time until I was sent to look at a colorqube 8570.
    It would start to initialize & warm...
  23. Replies
    5
    Views
    462

    Re: C754e Color lines when copying color docs

    I don't work on these mainly, but I've seen different models do similar things. There might be tiny specs of dust or dirt in the reading path, or the cis or whatever is picking up the image is going...
  24. Replies
    7
    Views
    497

    Re: bizhub c203 e4553 need advice from experts

    It's true, it is a used laser. I don't have access to any others. I'll see if I can find the trouble reset. Maybe it will clear after sitting in the machine for a while. Would a laser problem cause...
  25. Replies
    7
    Views
    497

    bizhub c203 e4553 need advice from experts

    Not one of the brands we work on, but have to look at it anyway. Originally the problem started as an e4553, yellow laser malfunction. I replaced the laser, turned it back on, and it still had the...
Results 1 to 25 of 44
Page 1 of 2 1 2