Search:

Type: Posts; User: keithxxiii

Page 1 of 12 1 2 3 4

Search: Search took 0.17 seconds.

  1. Replies
    12
    Views
    831

    Re: Email Reporting Ricoh

    How did you managed to upload the destination address? I was trying it with an SD card, created a txt file for the required destination. When I read it from the SP mode, it says failed.
    Almost...
  2. Replies
    5
    Views
    4,322

    Re: MPW 2401 shadow around text and solids

    I thought it was an optical illusion...

    Anyway, have you checked the health of the drum and drum case assembly? It could be that the cleaning blade is quite deformed from both sides.
  3. Replies
    34
    Views
    1,037

    Re: Mp5002 streaks

    Hi,

    I had this problem in MP3353, new drum, charge roller, charge cleaner, developer, fuser...etc PM parts. Since the machine is not frequently serviced, the seal covering the toner recycling unit...
  4. Replies
    4
    Views
    232

    Re: HP M880 slow copying

    Are you using FS4 on it?
  5. Re: MPC4502 J060 when running transparencies

    If you are suspecting it is a hardware issue, how bout trying to isolate it?
    Disconnect bridge and finisher then recreate the problem.

    If it works fine, check your bridge and finisher.

    B/R
  6. Replies
    18
    Views
    8,042

    Re: MP W2401 PS CODE SC-406

    What's the value of your SP 3001-01? Is it higher that the normal operating value? Can you at lease upload the sp table?
  7. Replies
    7
    Views
    209

    Re: N()()B tech here!

    Welcome aboard
  8. Replies
    18
    Views
    8,042

    Re: MP W2401 PS CODE SC-406

    What's the value of your PWM? If it is higher that the specified value, check your ID sensor. Also, follow what brian has posted
  9. Replies
    16
    Views
    609

    [Misc] Re: reset soft count to zero

    42174
  10. [Misc] Re: Ricoh Aficio MP 301 - smudged line at the top back side of the page.

    +1
  11. Re: can a counter be increased abnormally in a ricoh mp 5000

    IMHO, you can't simply increase the digital counter of the machine. If you are a tech, you could check the logging data for number of jobs. It shows the average jobs you do. Might as well check the...
  12. Re: MP6001 with SR4030 finishe and punch, "empty punch container" message does not cl

    Had a tech support call last month on the same prob. It was the HP sensor of the punch unit. It turned out, the seat where the sensor is installed got deformed.
  13. Re: MP3350 died when I replaced the drum and blade

    Print and Scan is an option for this machine that's why it was able to copy. It has HDD so I assume there was an SD card inside that you might have misplaced. Check if you can have this part D383...
  14. Re: can i use a mpc5502 fuser sleeve on a mpc3502?

    Yep they really are different. Here's the part numbers for 3502 sleeves.

    NA: D1424272
    EU: D1424273
    CN: D1424046
  15. Replies
    13
    Views
    1,442

    Re: Mac OS Mojave job accounting

    The latest printer driver for ricoh says "the user ID specified in the driver user interface might not be reflected unless the user interface is opened through specific applications".
    Usually when...
  16. Re: mpc3003 magenta saturation after delivery

    Sometimes this white streaks comes from a bad toner. Though OEM, if it has been exposed to extreme conditions, there is a tendency that it creates lumps on the development unit. Then here we go,...
  17. Re: central management for address book maxed out

    How bout ecopy sharescan with exchange connector?
  18. Replies
    4
    Views
    260

    Re: Secure Print issue / SteamLine NX v2

    How about the network firewall? Did you try telnet on the ports that were supposed to be opened?
  19. Thread: 4503 HDD

    by keithxxiii
    Replies
    9
    Views
    370

    Re: 4503 HDD

    We are in the process of replacing the 03 and 04 series from HDD to SSD. the 240 GB is enough to keep the machine from failing. Plus we noticed that when an SSD is installed, the web browser responds...
  20. Replies
    4
    Views
    260

    Re: Secure Print issue / SteamLine NX v2

    Is the firewall on? if yes, the required ports should be allowed within the network. Is the SPM service working fine? Have you checked any hotfixes applicable for the SPM?
  21. Replies
    4
    Views
    333

    Re: SCAN TO FOLDER

    Check on the logs. One of them will point to the service that blocks the scan to folder. And also, since you were scanning thru IP and wants to configure to hostname, your DNS will surely play an...
  22. Replies
    4
    Views
    303

    [Error Code] Re: MP C6004 Stuck on please wait

    Must be a bad HDD. Disconnecting it will cause it stall for some time. Do a diskpart and clean the disk. This worked for me the last time I had an issue with an equitrac enable machine.
  23. Replies
    25
    Views
    1,396

    [Misc] Re: Ricoh MP C 4504

    The MFP must be haunted.:D

    May i suggest doing a backup of the NVRAM, then do a clear, test if the problem is still there. Another suggestion if you have a spare SOP, try swapping them.
  24. Replies
    3
    Views
    610

    Re: Ecopy Scanstation & Papercut

    I configured single sign on with ecopy and pcc4. Don't know if it is supported with papercut as they are different vendors. If session logon is not required (well, depending on your connector), i...
  25. Replies
    19
    Views
    1,363

    Re: W3601, bad mojo.

    What's the size of your paper? I had this on 1 case, the tray roll was on A2 it turned out the paper was not positioned properly.
Results 1 to 25 of 280
Page 1 of 12 1 2 3 4