Search:

Type: Posts; User: adriansto

Page 1 of 20 1 2 3 4

Search: Search took 0.17 seconds.

  1. Thread: Xerox PWS

    by adriansto
    Replies
    3
    Views
    109

    Re: Xerox PWS

    What mean ' updated PWS " ?
    One that works on win 7 64 bit or Win10 ?
    I dont think you will obtain for free.
  2. Replies
    2
    Views
    66

    Re: XEROX 5945 Activation Code

    There is something like that. It change service plan and enable to use metered or sold consomables.
    What you plan to do ?
  3. Replies
    2
    Views
    121

    Re: Xerox color 560 yellow missing

    What about drum module , bias contact on developer module , btr1 from IBT assy ?
  4. Replies
    2
    Views
    97

    Re: xerox nuvera pem-03-3460 error

    Multiple problems generate this error code.
    What type of Nuvera ?
    Tell me your mail to send you some bulletins.
  5. Re: XEROX dc560 Stuck on boot sequence 2/6 Please help!

    Nice !
    Welcome !
  6. Re: XEROX dc560 Stuck on boot sequence 2/6 Please help!

    Old configuration report, machine service logbook. machine papers, ask your tech friend to help you to find machine sw. version.
  7. Re: XEROX dc560 Stuck on boot sequence 2/6 Please help!

    What version of software is now on machine ?
    Send me mail = stoadis@gmail.com
  8. Re: XEROX dc560 Stuck on boot sequence 2/6 Please help!

    Holding Energy Saver and Start buttons togheter while powering on the machine.
    Watch for error code will appear.
    Probably you will need to reload machine software.
  9. Replies
    4
    Views
    232

    Re: Versalink c405 admin password

    I can generate the reset code for you.
    Send me mail = stoadis@gmail.com
  10. Re: xerox 550 fuser not fusing 300 gsm paper

    Go to Printing Options tab in printer driver and select High Quality in Print Quality menu.
    Then go to Advanced tab -Advanced Settings and select Enhanced in Gloss Level option.
  11. Replies
    4
    Views
    232

    Re: Versalink c405 admin password

    One method is to reset the admin passwd using 12 digit reset code.
    This code is generated by special software using machine serial number and total meter.
    Other method is to use special boot mode -...
  12. Re: Xerox 550/560/570 Fiery (B3G) system version

    9e
  13. Re: Xerox 550/560/570 Fiery (B3G) system version

    It's Linux based and run only version 1.0 software.
    Not compatible with 1.1 version.
  14. Re: Xerox Workcentre 7655 error "System fault, contact administrator"

    Try to reseat flat cable from ROS to MCU pwb.
    Also disconnect the network cable and restart the machine.
    It's a good ideea to have pws diagnostic software for this machine to check error codes.
  15. Thread: XESsend

    by adriansto
    Replies
    2
    Views
    308

    Re: XESsend

    Send me mail = stoadis@gmail.com
  16. Replies
    2
    Views
    285

    Re: Xerox work center pro 123

    There isnt any encryption on these machines.
    Post here machine configuration report.
    Do you have fax option installed ?
  17. Replies
    33
    Views
    2,553

    Re: xerox 8870 printhead

    93-982 to 93-985 errors mean ink load obstruction faults for black,magenta,cyan and yellow.
    As result the BK M C and Y reservoirs not filled.
    There are a long list of checkings need to be done for...
  18. Replies
    6
    Views
    455

    Re: HELP!!!!!! XEROX 7765 04-563-00

    Even in bulletins you'll dont find it.
    Read this:
    Error 04-563 and 04-561 in Web Display, Machine down
  19. Replies
    5
    Views
    523

    [CQ] Re: Chinese parts!!

    The design intent for WC72xx was that these machines would display a warning that the cartridge needed to be replaced, but would run to failure.. This is ok for machine software version 220.3 and...
  20. Re: Versalink C505 error 116-357 Is this a corrupted print job?

    This is what edoc say:

    116-357 PS Fatal System Error

    Perform the steps that follow:


    Switch off, then switch on the machine, GP 4.

    Check the version of Controller ROM.
  21. Re: Versalink C505 error 116-357 Is this a corrupted print job?

    Be ready to reload software as a first try.
    Second is to replace the board.
  22. Replies
    5
    Views
    353

    [Dead] Re: Fiery EXP250 software

    Send mail to stoadis@gmail.com
  23. Replies
    5
    Views
    353

    [Dead] Re: Fiery EXP250 software

    The other label, it start with BMK.... or WYM...
    I have software for WYM version
  24. Replies
    5
    Views
    353

    [Dead] Re: Fiery EXP250 software

    What Fiery serial number ?
  25. Thread: 093 - 315

    by adriansto
    Replies
    2
    Views
    468

    [Error Code] Re: 093 - 315

    762-317
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4