Search:

Type: Posts; User: scanmc

Page 1 of 4 1 2 3 4

Search: Search took 0.09 seconds.

  1. Replies
    4
    Views
    339

    [CQ] Re: Oki c9655 colour misregistration

    I learned my lesson years ago to only use OKI supplies. I woulds say if it happened after the user installed the non OKI drum units that's your culprit
  2. Replies
    0
    Views
    221

    [Wanted] CS1635 Doc Feed Harness

    Does anyone have one of these beauties laying around on the shelf?
  3. Replies
    2
    Views
    568

    Re: Muratec MFX-3535 Turns on/off

    Did you try a new power supply?
  4. Replies
    4
    Views
    758

    Re: Looking for OKI Tech in Chicago Area

    Dealer Locator | OKI Data Americas
  5. Replies
    4
    Views
    448

    Re: CS-221 Developer / DV Unit ????

    One more thing, Also make sure the mirrors are clean especially if the copies are light down the center. The fuser has a tendency to leave a hazy film on the mirrors since it sits right bellow them....
  6. Replies
    4
    Views
    448

    Re: CS-221 Developer / DV Unit ????

    I know on the old CS2030 the developer was changed out of the dv unit.If I recall on the CS 2050 -2550 series these machines were a mono component machine where the toner\dv was all in one. On these...
  7. Thread: MPC5502

    by scanmc
    Replies
    2
    Views
    276

    [Misc] Re: MPC5502

    Thanks! Found it
  8. Thread: MPC5502

    by scanmc
    Replies
    2
    Views
    276

    [Misc] MPC5502

    Good afternoon. I'm looking for the part number for the top half of the case that the transfer roller sits in. This customer seems to have gotten aggressive and slammed the door shut breaking the...
  9. Re: Oki MC860 optional paper tray parts catalog required

    I checked on the OKI website and I don't see any parts list for the optional tray. I do have a parts machine in the back but by looking at your location that might be an issue getting it to you.
  10. Replies
    0
    Views
    302

    [For Sale] Muratec MFXC2828 OEM Supplies

    Make an offer

    2-Black toners
    1-Magenta toner
    1-Cyan toner
    1-Yellow toner
    1-Waste container
    1-Cyan dv unit
  11. Thread: Ricoh MPC5501

    by scanmc
    Replies
    8
    Views
    451

    [Jamming] Re: Ricoh MPC5501

    Well It ended up being the gate shaft and bushings were so gummed up that the solenoid would open or close properly. After a good cleaning she's working like a champ again. You would thing after all...
  12. Thread: Ricoh MPC5501

    by scanmc
    Replies
    8
    Views
    451

    [Jamming] Re: Ricoh MPC5501

    Thanks for the info. Heading back out here today for a closer look.
  13. Thread: Ricoh MPC5501

    by scanmc
    Replies
    8
    Views
    451

    [Jamming] Ricoh MPC5501

    I don't do a lot of work on Ricoh's but I've got this one out in the field. My issue is when duplexing the machine gets about an inch out of the fuser when entering the bridge then jams (J024 code) I...
  14. Replies
    4
    Views
    1,128

    Re: MFX-C2280 doc feeder

    Possibly something up with the HDD?
  15. Replies
    4
    Views
    1,128

    Re: MFX-C2280 doc feeder

    Like your avatar go Cubs! Does the machine actually jam when scanning to the user box or does it just kinda die in the middle of it?

    Maybe one of our Konica Minolta techs has a suggestion. This...
  16. [Misc] Re: Oki C610n Network Software Needed (Module I/F 00.18)

    Took a look on the bpx site and nothing on the knowledge base for firmware on the C610N. You may need to contact OKI support to see if they can help
  17. Thread: Bizhub 4422

    by scanmc
    Replies
    5
    Views
    611

    [Misc] Re: Bizhub 4422

    Thanks for the replies. Think I'm going stay clear from these if the adf's are weak as the customer will be scanning a fair amount.
  18. Thread: Bizhub 4422

    by scanmc
    Replies
    5
    Views
    611

    [Misc] Bizhub 4422

    Looking to place 6 of these in a chain store where space is limited. Customer is in need of a small machine that can do 5-10K a month. My question is what kind of experience has anyone one had with...
  19. Thread: Biz 25e

    by scanmc
    Replies
    12
    Views
    727

    Re: Biz 25e

    This is a Muratec MFX3530/3590 Only way to reset is with a new drum unit
  20. Replies
    3
    Views
    424

    Re: HP Enterprise M605N

    Not sure on that code but fuser errors are usually a 50'S error. Possibly try reloading the firmware
  21. Replies
    0
    Views
    371

    Samsung CLX 9252 image rotation

    While using the feeder the image orientation is fine but as us as you put the paper on the glass in the same direction the machine wants to rotate the image . This just started happening out of the...
  22. Replies
    0
    Views
    781

    Omation 2112 Letter Opener Service Manual

    Long shot but would anyone happen to have a service manual for this machine.

    Thanks
  23. Replies
    3
    Views
    544

    [Misc] Re: Kyocera M5521CDW

    Thanks for the replies. If I get a chance today I'm going to take out the transfer belt and check out the drum units. I'll follow up after
  24. Replies
    3
    Views
    544

    [Misc] Kyocera M5521CDW

    I have a Kyocera M5521 that is giving a banding pattern while printing or copying (see below) I'm thinking HV unit or control board. Before I tear into this thing which doesn't look fun I would like...
  25. Replies
    1
    Views
    2,313

    Re: mfx2530 error 12

    Not sure on the MFX2530. But the MFX2830 is a complete unit and the consumer can change it when it reaches life. After install the machines blows a pico fuses and does the dv calibration
    The...
Results 1 to 25 of 82
Page 1 of 4 1 2 3 4