Search:

Type: Posts; User: Dickie

Page 1 of 7 1 2 3 4

Search: Search took 0.14 seconds.

  1. HP Laserjet Pro 400 Colour M451nw Jam tray 1 (very weird issue)

    Hi all hope someone has seen this very weird issue before as I am baffled.

    I arrive at the machine and it shows jam in tray 1(Manual feed tray).
    The jam is cleared by dropping down the green...
  2. Replies
    10
    Views
    428

    Re: Brother MFC9440 32 error

    As others have said it will be the solenoid on the board under the fuser sticking !!!!!!!
    Why ask for help if you are not prepared to even look at what people suggest.

    I have had this error on...
  3. Replies
    5
    Views
    1,857

    [Misc] Re: Brother HL-5250DN & HL-5350DN

    You need the tool kit supplied on the training CD to be able to do this
  4. Replies
    14
    Views
    830

    [Misc] Re: Konica C452 scan/fax not showing up

    I'm with the above. It needs to know that it has a Hard Drive to allow these functions and full reset usually sets this to off
  5. Thread: Part Name?

    by Dickie
    Replies
    11
    Views
    1,222

    Re: Part Name?

    Transfer roller.
  6. Re: C203 with hash marks :::: :::: :::: black only

    We had this issue a couple of years ago and despite changing various suggested parts from U.K Technical we never got to the bottom of it.
    We tried the hard drive and all the running plug in...
  7. Replies
    5
    Views
    1,040

    Re: Brother MFC9970CDW prints black line

    It is offsetting. stop a page half way through the fuser and see if offset is on the unfixed area.
    If it is then it is obviously drum, if not then fuser.
    I notice all you are using is generic...
  8. Replies
    5
    Views
    453

    [Error Code] Re: Brother MFC-9130CW

    This is usually caused by customers ignoring the change drum soon message as Brother products do not stop when drum life reaches end.
    Go to reports and print out the user settings report
    At the...
  9. Re: Bizhub c451 color registartion problem - Cyan color shrinks

    Problem looks like Magenta colour out of alignment.
    If I remember correctly this machine has print heads that rock from side to side and up and down on springs at either end.
    Remove magenta unit...
  10. Sharp MX3560 Repeats colours on one plain only, black perfect

    Background to fault is that the machine just hung and would not come to ready followed by saying finisher tray not present even though no finisher was fitted and erroring out.

    Tried changing...
  11. Re: MFX-C5580N calling for Black drum replacement at 51000

    It uses Black as well during colour printing so 75K +51K =126K usage. Pretty close to your life expectancy of 135K , and as most of these are based on continuous printing I would suggest that this...
  12. Re: Brother intelifax 2840 locks up and has to be rebooted. looking for a reset

    Yes do a 91 first especially if the customer has changed a lot of the factory default settings or has a load of speed dial entries as this does not reset or clear them down.
    Then 99 to exit as you...
  13. Re: Brother intelifax 2840 locks up and has to be rebooted. looking for a reset

    Try a partial memory clear 91 this saves all customer input details and speed dials.
    If this does not work full memory clear, factory default restore is 01

    I presume you know how to enter service...
  14. Replies
    4
    Views
    822

    Re: Brother 4100E line problem?

    Disconnect splitter and connect fax at main phone in point if no noise then it is the splitter or the cc terminal.
    If you still have interference then disconnect fax and plug a telephone handset...
  15. Thread: Sharp Machines

    by Dickie
    Replies
    3
    Views
    489

    Re: Sharp Machines

    You need a licence to scan on sharp products.
    Have you got a valid licence key entered ?
  16. Replies
    9
    Views
    887

    Re: Toner saving ideas

    Buy a cheap pair of side cutters and simply cut the plug off your machine.

    This will result in an instant 100% saving in not only toner costs but all other running costs.

    Unfortunately it will...
  17. Replies
    5
    Views
    510

    Re: M6526 CDN Weird issue

    Thanks for first set of replies, but am still awaiting reply as to where the suggested adjustments can be found
  18. Replies
    5
    Views
    510

    Re: M6526 CDN Weird issue

    Have done colour calibration Blackcat.

    Santander, have not done either of these adjustments as I do not know where they are.
    Are they in service mode ? if so can you point me in the right...
  19. Replies
    5
    Views
    510

    M6526 CDN Weird issue

    Engine prints are fine
    Scans are fine
    Black and white copies are fine
    Colour copies appear slightly blurred as if the colour registration is slightly out and appears to get marginally worse from...
  20. Replies
    4
    Views
    242

    Re: Ineo +451 creasing A3 from tray 1 only

    Sorry have no pictures to hand but they are very light creases so probably would not be visible anyway. 2 is the most I have seen on an a3 page
  21. Replies
    4
    Views
    242

    Ineo +451 creasing A3 from tray 1 only

    Fault as per title, machine is creasing A3 but only on the bottom half of the page but only from tray 1.
    Put paper into tray 2 and it works fine on both single sided and duplex.
    Fitted new feed &...
  22. Replies
    8
    Views
    1,190

    Re: mfc-9340 fuser removal and or rebuild?

    Fuser removal is easy, just replace the whole unit if necessary, parts are not usually available, just complete unit
  23. Re: how do you carry a 3000kg of photocopy machine up the stairs?

    How many friends do you have? =^..^=

    Non when you get to the top:D
  24. Replies
    1
    Views
    225

    Re: Booklet printing

    Had an issue like this once before and the company I.T guy did something on their system that made the machine print driver the priority over all other programmes internal drivers. Not sure what he...
  25. Thread: disable corona

    by Dickie
    Replies
    2
    Views
    556

    Re: disable corona

    Yes. The easiest way to disable this message is to fit a new drum.
    All Brother machines just say change drum soon and the customer just ignores it, running the drum past end of life causes the...
Results 1 to 25 of 152
Page 1 of 7 1 2 3 4