Search:

Type: Posts; User: Iman

Page 1 of 3 1 2 3

Search: Search took 0.08 seconds.

  1. Re: restictive printing with microsoft surface pro

    Darry do u mean after downloading the driver from the server Instead of loading it locally.
  2. Re: restictive printing with microsoft surface pro

    Hi jhalfhide thanks for the reply. That could be the problem
    I just tried to load the drivers localy on to the Surface Pro and it worked fine. I will need to have a chat with the network admin....
  3. restictive printing with microsoft surface pro

    Hi all, has anybody tried to set up restrictive printing for users on TA5501i using surface pros. We have drivers loaded on the server and already set up to promp the user for a pin code when they...
  4. Replies
    1
    Views
    261

    Samung clx-9353 booklet jams

    Hi all, has anybody had problems with the 3250 sheet clx-9352 booklet finisher. I am having intermittent paper jams and error code #h2-2775. I have since seen this code on another machine and...
  5. Thread: Papercut

    by Iman
    Replies
    2
    Views
    379

    Re: Papercut

    Hi sparks thanks for your reply. You are right about the Konica's I had an issue with them at first but I have checked and followed the Oki setup procedure from Papercut and I just cant get the card...
  6. Thread: Papercut

    by Iman
    Replies
    2
    Views
    379

    Papercut

    Hi all, has anybody had any experiance setting up Papercut on an Oki es7470 or any Oki device. I recently installed Papercut on a customers network monitoring Konica Minolta, Samsung, Kyocera and Oki...
  7. Thread: clx-9251

    by Iman
    Replies
    3
    Views
    603

    clx-9251

    Hi all just wondering if anybody has had a problem with the clx-9251 over toning on black causing a slightly gray background. It has been going on for some time. So far I have replaced the drum...
  8. Replies
    2
    Views
    4,190

    Printer mixing up print jobs

    Hi all just wondering if anybody has come across this problem. If a user is printing a job, usually a big job and another user prints something the second job will not wait for the large job to...
  9. Replies
    7
    Views
    951

    Re: km 5050 noisy and jamming

    Hi all thanks for the responses. Just to let you know I got a chance to spend some time on the problem and after stripping the vertical feed unit from the machine I found three teeth on the gear...
  10. Replies
    7
    Views
    951

    km 5050 noisy and jamming

    Hi all does anybody know of any known problems regarding jamming and noise on this model. The noise seems to be coming from the reg unit as i can hear it slip causing noise .I have also noticed the...
  11. Thread: oki 8460 jammin

    by Iman
    Replies
    0
    Views
    830

    oki 8460 jammin

    Hi all just wondering if anybody has worked on an oki 8460. I am having a problem with tray 1 jamming. All other trays appear to be working fine including the by-pass tray. There seems to be a noise...
  12. Thread: oki 4520

    by Iman
    Replies
    0
    Views
    472

    oki 4520

    Hi all I have posted this thread under its utax model number but I found out that its also an oki 4520.
    Has anybody seen a problem on the OKI 4520 fax. When the fax is printing a recieved fax it...
  13. Thread: Utax 542 fax

    by Iman
    Replies
    0
    Views
    574

    Utax 542 fax

    Hi all, has anybody seen a problem on the utax 542 fax. When the fax is printing a recieved fax it may print one or two pages and then ask for A4 paper to be inserted in the upper tray. Even if paper...
  14. Replies
    3
    Views
    1,066

    km 3060 press roller jams

    Hi all just wondering if anybody has had press roller jams on this model machine. The paper seems to be wrapping around the lower press roller. Once the jam is removed it could work away trouble free...
  15. Replies
    1
    Views
    927

    km c2525e blue background

    I am had a problem with slight blue background when copying on full colour mode from the adf on two of these machines recently but was able to correct one of them using service code 68. It prints in...
  16. Thread: km c2525e noisy

    by Iman
    Replies
    3
    Views
    922

    km c2525e noisy

    Hi has anybody had noise caused by the toner feed oger on this machine. I stripped n cleaned this section for noise before and it worked for a period of time but has just come back in for noise...
  17. Replies
    1
    Views
    574

    km5050 eject section jams

    Hi anybody had problem with paper jams as the paper enters the eject section just above the fuser. I have just had this problem on two differant machines. It works ok on A4r but jams on A4. It looks...
  18. Replies
    11
    Views
    1,957

    Can you give anymore information Mr spock, what...

    Can you give anymore information Mr spock, what way should they be set. I know with XP it's just a matter of authorising read write for the shared folder. As I say I haven't been able to scan to...
  19. Replies
    11
    Views
    1,957

    scan to network pc on vista

    Hi all just wondering how to share a folder properly to allow scan to network using smb on vista. I have set up networking scanning on xp with no problems but with vista there is always a problem. I...
  20. Replies
    3
    Views
    542

    Anticipated

    Anticipated
  21. Replies
    3
    Views
    542

    km 2550 registration moving

    Hi all just wondering if anybody has seen a problem with the km2550 registration moving from the glass and the adf. So far I have cleaned the reg roller and adjusted the copy registration in service...
  22. Replies
    10
    Views
    1,684

    Thanks for the reply aodtech I'm familiar with...

    Thanks for the reply aodtech I'm familiar with the process and I have checked the contacts and even replaced the housing in case of arcing. The problem I am having is not light copies but only...
  23. Replies
    10
    Views
    1,684

    I ran copies with the side door open and could...

    I ran copies with the side door open and could see the image on the drum.The image on the drum was the same as what is produced on the copy so it leads me to think that it is not a problem with the...
  24. Replies
    10
    Views
    1,684

    Hi thanks for the reply but as i said i changed...

    Hi thanks for the reply but as i said i changed the full maintenance kit and also checked those units by using known working units from another km2550.I also changed the ecb-engine control board and...
  25. Replies
    10
    Views
    1,684

    km2550 almost blank

    Hi all I'm having a problem with a km2550.The machine was due a full maintenance kit due to copy quality but this was just due to a worn drum and milage.When the kit was changed the dev gave me a...
Results 1 to 25 of 53
Page 1 of 3 1 2 3