Search:

Type: Posts; User: mntech

Page 1 of 7 1 2 3 4

Search: Search took 0.19 seconds.

  1. Replies
    0
    Views
    37

    Clx-9201 stuck on boot screen

    Samsung multixpress clx-9201 is stuck on boot screen, never make it past the Samsung logo, the "thinking" icon spins a couple times then freezes

    I can access syncthru, but I don't see anywhere to...
  2. Replies
    7
    Views
    169

    Re: HP Color LJ 3600 faint blacks

    Contacts are secure and making good contact with both the hv board and the drum unit
  3. Replies
    6
    Views
    2,051

    Re: Samsung x4300 9251 Screen hell

    Is it the OPE panel PCB that needs to be replaced? on the clx-9201
  4. Replies
    6
    Views
    2,051

    Re: Samsung x4300 9251 Screen hell

    Not trying to hijack this thread, but I have issue with the CLX-9201, where the machine just freezes up at the Samsung logo, never gets past it.

    Is this the same thing you guys are talking about?...
  5. Replies
    7
    Views
    169

    Re: HP Color LJ 3600 faint blacks

    Clips were intact and hv board was holding flush to contact holders, double checked continuity from hv board to contacts inside machine just to be sure.

    Customer got back to me, unfortunately they...
  6. Replies
    7
    Views
    169

    Re: HP Color LJ 3600 faint blacks

    I'll have to check those clips tomorrow.
    I swapped yellow and black, then yellow went missing, so I know it is that slot, and not the cartridge.

    I believe transfer is good, if I let the the...
  7. Replies
    7
    Views
    169

    HP Color LJ 3600 faint blacks

    Hello,
    I have a HP Color LaserJet 3600 printer that is printing the blacks super faint.

    This machine was dropped off to us with a bad slide lever(that opens the drum shields and engages that drum...
  8. Replies
    4
    Views
    409

    Re: 8000i fuser fault after opening door

    Fuser IH PWB replacement resolved both issues. Thanks

    Sent from my SM-G955U using Tapatalk
  9. Replies
    4
    Views
    409

    8000i fuser fault after opening door

    Getting a C6720( fuser ih belt rotation error) every time any of the right side doors are opened and then closed.

    Swapped fuser with known good fuser, checked rotation sensor wire harness in...
  10. Replies
    8
    Views
    1,100

    Re: Toshiba 5520c close duplexing unit cover

    Sure enough, didn't realize there was a gate in what I would call the duplex inverter, that has a flag with a photo sensor that detects the duplex unit is open/closed... Sneaky little bugger is a bit...
  11. Replies
    8
    Views
    1,100

    Re: Toshiba 5520c close duplexing unit cover

    I haven't been onsite yet to verify this, but it looks like it may be a sensor instead of interlock switch that is detecting the duplex unit being open.


    40168
  12. Replies
    2
    Views
    951

    Re: Kyocera Net Gateway Administrator Password

    Thanks,
    That worked.

    for the java gateway, username is: admin password is: admin#1234
    for the net gateway, username is already filled in as Administrator, password is Admin#1234
  13. Replies
    8
    Views
    1,100

    Re: Toshiba 5520c close duplexing unit cover

    I appreciate the reply black cat, but I have manually actuated the switches and verified voltages when doing so, close duplex unit message never goes away

    Sent from my SM-G955U using Tapatalk
  14. Replies
    8
    Views
    1,100

    Re: Toshiba 5520c close duplexing unit cover

    One thing I noticed is the only other door that will display a "cover open" message is the duplex outside cover, nothing shows with adf, front door, finisher, lower right door. Not sure if that is...
  15. Replies
    8
    Views
    1,100

    Toshiba 5520c close duplexing unit cover

    Door switches check out, fuses are good. Any help much appreciated.

    Another company had a tech out, they said they replaced all the door switches and the dc power supply.

    Thanks

    Sent from my...
  16. Replies
    2
    Views
    951

    Kyocera Net Gateway Administrator Password

    Hey guys,
    I have some non-kyo machines in the field that we are trying to monitor, I usually install the java gateway, but have been trying out the net gateway

    Some machines get discovered.......
  17. Re: Konica 7060 Jamming/Warming Up/Losing Adjustments

    Thanks for the reply.
    I pretty much assumed reg clutch, ldetect sensor and nvram were likely suspects, what about for the extremely long warming up message?

    I don't think we are going to proceed...
  18. Replies
    10
    Views
    714

    Re: For the Mac Guys a little info needed

    Usually Mac's will just use a generic postscript driver that won't give you all of the Ricoh print features, I would download the print driver from Ricoh's website for your os

    Once the driver is...
  19. Replies
    8
    Views
    429

    Re: KFS Mobile - No devices found

    Good to know!

    I just plugged my phone charger(usb) into a machine, and sure enough, it showed up! It looks like this is only useful for upgrading firmware, which I would normally push remotely....
  20. Re: A little fyi for those with scan to smb issues with smb1 disabled

    I usually push customers to use scan to email, unless they have a server with shared scan folders. I also need to use FTP on some older machines that don't have smb patches. I use fileZilla server.
    ...
  21. Replies
    8
    Views
    429

    Re: KFS Mobile - No devices found

    Yeah, I use the website on my mobile phone almost everyday, but since the website isn't mobile friendly, I constantly have to zoom in and out to navigate, I was just hoping the app would give me the...
  22. Replies
    1
    Views
    2,752

    Re: Xerox Workcenter 7556

    They are no where near the quality of lets say a Xerox docu 260, but have decent color for office color needs. Even the 7345 series had better photo color quality, but I like the longevity of the...
  23. Replies
    8
    Views
    429

    Re: KFS Mobile - No devices found

    I haven't had any problems with kfs web version like some ppl have, just not sure why the app doesn't show me anything. It has an icon that looks like the Bluetooth symbol to refresh devices, is this...
  24. Replies
    8
    Views
    429

    KFS Mobile - No devices found

    Just installed KFS Mobile, when logging in, it shows "No devices found" on android phone

    Server URL: https://rfs-us.kyocera.biz/
    Username: My kfs username
    Password: My kfs password
    Access Code:...
  25. Replies
    5
    Views
    428

    Re: KM3035 many pages instead of 1 page

    I've seen this before with an incorrect print driver.

    IT person just renamed a konica print driver to kyocera because the IP was the same as machine was being replaced.

    Test page would work...
Results 1 to 25 of 175
Page 1 of 7 1 2 3 4