Search:

Type: Posts; User: ReproKev

Page 1 of 8 1 2 3 4

Search: Search took 0.07 seconds.

  1. [Misc] Re: On an IRC2380 I have a dominant of yellow,

    Set all the color density settings in the user mode to "0" and do a full gradation.
  2. Replies
    1
    Views
    106

    Re: Canon IR Adv 7065 i

    That's because the machine has an error code (check printer message at bottom of screen). Go to the "copy" screen to see what the code is.
  3. Replies
    5
    Views
    165

    [Error Code] Re: iRAC 5235i error code E020-0x91

    I've never seen that problem before, but I believe the drum driver pcb controls developing motors and toner supply clutches. At least it does in the c5035 series. I would start there.
  4. Replies
    5
    Views
    165

    [Error Code] Re: iRAC 5235i error code E020-0x91

    Take out the developers and manually rotate them to see if there is toner/starter in them. It's odd that all 4 would have a problem or be empty.

    Was the machine running previously or is it a new...
  5. Replies
    8
    Views
    341

    Re: Canon Ir adv 8205

    High humidity location? I had a similar E061 problem with a customer running a machine out of their home garage.Turn off potential control until the environment improves. Quality will probably suffer...
  6. Replies
    2
    Views
    165

    Re: Canon IR adv 7065

    Did you get the black hopper repaired or replaced?

    The hopper won't be able to grab the end of the toner bottle, lock it in and and pull it open until you do.
  7. Re: Part # c7055/c9065/c7060 Manual feed guide

    Update - I was told the part is discontinued. Odd, because it's the same part used on the c7260's and they're not that old.
  8. Replies
    5
    Views
    299

    Re: CANON IR ADV c 7055

    I agree with it being toner clumps in the Magenta developing assembly. As far as I know, there is not starter available to do a developer change like you could on the old CLC's.

    You need to get...
  9. Replies
    4
    Views
    219

    Re: Canon IR Adv 7065 i

    There's a gear with one way bearings in it (FU6-0584) in the black hopper assembly that cracks causing the door to not open. Big PIA to replace but at least it's not one of the color hoppers, they're...
  10. Replies
    15
    Views
    660

    [Error Code] Re: E020-391 IR5030i

    Check the rear of the cyan developing assm. It's common for the white "plus" shaped drive part to break. There's an updated part with a pin available for it.
  11. Replies
    4
    Views
    725

    [Error Code] Re: Canon ir adv 7565 E009 0501 Error Code

    Does that pdf apply to a c7065 as well? If so, can you put it up again?

    Just got a call for that code and a search before heading out lead me to this post. I haven't seen this code before and...
  12. Re: Part # c7055/c9065/c7060 Manual feed guide

    That's where I ordered it from. I'll post back when I get it whether it's the correct part or not.
  13. Re: Part # c7055/c9065/c7060 Manual feed guide

    Thanks!! That's exactly what I needed!
  14. Re: Part # c7055/c9065/c7060 Manual feed guide

    Thanks, but it's definitely the part I circled in the pic I posted. It's the center one of the 3 paper guides that sit below the manual feed roller and are accessed with the mf door open. It has a...
  15. Part # c7055/c9065/c7060 Manual feed guide

    I can find the part in the manuals but no number associated with it.

    It's the center paper guide directly under the manual feed roller. It has a thin metal plate on it that gets damaged over time...
  16. Replies
    6
    Views
    467

    Re: IRA-8095 FM30 location

    Turns out it was one of three fans that are hidden inside the filter box that you swing out of the way to get to the corona/drum area behind the front door.
  17. Replies
    6
    Views
    467

    Re: IRA-8095 FM30 location

    I'll check there too. Thanks.
  18. Replies
    6
    Views
    467

    Re: IRA-8095 FM30 location

    I just pulled the laser on another customer's 8585 (basically the same machine) and didn't see any fans in there. I'm heading back out today and I'll double check.
  19. Replies
    6
    Views
    467

    IRA-8095 FM30 location

    Copier has an E820-0000 code for the developer lower cooling fan FM30. I ordered the fan, went to install it and can't locate it's placement. The service manual location pic makes it look like it's...
  20. Replies
    6
    Views
    1,400

    [Error Code] Re: E025-0410 / iR-ADV C70xx

    I've replaced that gear many times and keep them in my car stock. I'd love to know how to replace the gear on the three color hoppers without taking the triple hopper assembly out. Can you give...
  21. Replies
    2
    Views
    262

    [Misc] Re: CLC 3200 - Stripe down copy

    Could also be the cleaning assembly. If the blade is starting to turn yellow or if it's old, replace it.
  22. Re: Printing to C5030 from Mac with user codes

    The install program you ran only installs the driver into the operating system. You still need to add the printer in the printers area before you can print to it.

    I don't do Mac's very often but I...
  23. Replies
    4
    Views
    606

    Re: C5035 toner level

    If you have a Fiery attached you can go into the PS print driver (from the print screen, not the printer properties screen) and the levels are listed on one of the last tabs. I know you can do that...
  24. Replies
    2
    Views
    276

    Re: Year of manufacture

    Every Canon copier has a plate on the back cover (near the serial number plate) that lists the manufacturing month and year of that specific machine.
  25. Re: Please advise on Imagerunner cassette gears installation

    I've used epoxy on the gears to lock them in place. Good temporary fix (until new cassette come in) or permanent fix if the customer doesn't need to adjust the paper width.
Results 1 to 25 of 187
Page 1 of 8 1 2 3 4