Search:

Type: Posts; User: dunwinjin

Search: Search took 0.06 seconds.

  1. [Misc] Re: MP305+SPF Document feeder skewing fault.

    Anyone had an issue with duplex originals? I have two separate units where the sprung loaded lever, pushed down by the top cover, on the front side comes out of its housing and caches the paper as...
  2. Replies
    59
    Views
    13,564

    [Jamming] Re: mp6002 jamming in adf only in scanner mode

    About that motor....

    We have already replaced the motor on our machine to no effect. Still waiting on the harness so nothing else helpful
  3. Replies
    59
    Views
    13,564

    [Jamming] Re: mp6002 jamming in adf only in scanner mode

    The difference could be that callibration of the optics. It won`t do it in SP free run. Just come back from my machine and I`m going to replace the wiring loom to the top cover assy.

    I`ll let...
  4. Replies
    59
    Views
    13,564

    [Jamming] Re: mp6002 jamming in adf only in scanner mode

    OK so I have a similar problem with a MP6001 adf. Will not jam in SP free run, but randomly in copy/scan mode, J06 and J54. It crumples the paper just like the image earlier on in this thread. ...
  5. Replies
    12
    Views
    4,954

    Re: Jam code J057 on MP7001 /RT43 LCT

    I have had this too. Several machines in one premises had us on a wild goose chase because the fault seemed to follow one particular lct, but then they worked fine back at our workshop. Cutting a...
  6. Replies
    7
    Views
    756

    [Misc] Re: MPC 6501 ACC failure

    On its way, get ready to duck
  7. Replies
    7
    Views
    756

    [Misc] Re: MPC 6501 ACC failure

    Ok, Tonermonkeh, here is where I eat humble pie. Having now checked the paper weight settings THOROUGHLY I found that the offending tray was set to 81 - 100gsm. It now acc`s everything. Is it me...
  8. Replies
    7
    Views
    756

    [Misc] Re: MPC 6501 ACC failure

    Thanks guys, the paper type is not the problem. The machine will do a Forced Line Position check. Forcing toner supply doesn`t seem to make a difference. all parts are well within yield. Ok, the...
  9. Replies
    7
    Views
    756

    [Misc] MPC 6501 ACC failure

    Hi, I have a machine that will perform acc for copies, but for prints, it goes through all the motions as if to print the test page but then comes up with a message "Test page could not be printed"....
Results 1 to 9 of 9