Search:

Type: Posts; User: rockdude

Page 1 of 7 1 2 3 4

Search: Search took 0.04 seconds.

  1. Re: How to setup Print Black and White as Default on Lexmark XC9235

    Thanks for the vote of confidence.

    I have no doubt after reading many of your posts that you would easily be able to learn and pass the MCSE.

    The fact is "I like working on Printers / Copiers"....
  2. Re: How to setup Print Black and White as Default on Lexmark XC9235

    Got it done.

    L O N G Time back I got my MCSE (Microsoft Certified Systems Engineer) so I am not a moron when it comes to servers.

    Customer was using IT from a place that only remotes in. Never...
  3. Replies
    16
    Views
    5,416

    Re: Xerox 7845 Service mode

    Please explain what Repair or Diagnostic is served by shaking the fuser ??
  4. Re: Xerox wokcentre 5875, Activation code request

    Odin is correct, probably looking for code for metered supplies.

    But you have to understand the point Phil B. is making.

    The Xerox machines without service manuals are almost impossible to...
  5. Re: How to setup Print Black and White as Default on Lexmark XC9235

    They were individually installed.

    They claim that the server coudn't push the drivers down?

    Not sure why they weren't pushed down by the server?
  6. How to setup Print Black and White as Default on Lexmark XC9235

    Going in behind another company.

    They installed all the drivers for 40+ employees. They all print color
    as default.

    Customer wants Black and White as default. With Mgmt approval to print...
  7. Replies
    11
    Views
    1,129

    Re: Xerox ColorQube 9303 Error: 093-533

    Thanks for your input "prismtech".

    I already swapped it out for a WS7845, and everything is good agian.

    Thanks again for replying.
  8. Replies
    7
    Views
    595

    Re: 08-900 Error on Phaser 7750 Jam at Fuser

    That is part of the "Fuser Exit Sensor" which was replaced.

    But thanks for playing !
  9. Replies
    5
    Views
    837

    Re: WC 7545 poor copy quality

    Richard from Xerox is correct.

    But instead of bad toner, I stongly suspect "Generic / Compatible" toner which causes the same symptoms.

    But fix is the same start vacuuming and dont put crap...
  10. Replies
    11
    Views
    1,129

    Re: Xerox ColorQube 9303 Error: 093-533

    Will try, Thank You for your reply.
  11. Replies
    7
    Views
    595

    Re: 08-900 Error on Phaser 7750 Jam at Fuser

    The 08-900 is just listed as a static jam.

    Swaped fuser.

    Checked in Diagnostics:
    Fuser Exit Sensor
    POB Sensor
    Tray 2 feet out
    Registration
    Duplex
  12. Replies
    7
    Views
    595

    08-900 Error on Phaser 7750 Jam at Fuser

    I am getting a Jam at the fuser, then error code 08-900 displayed in diagnostics.

    The paper is going in about a quarter inch into the fuser before it says Jammed.

    No obstructions, all sensors...
  13. Replies
    2
    Views
    259

    Re: Phaser 6350 streaking, repeating image

    Was generic toner used at "ANY" time??

    Once used it contaminates developer and can cause similar problems.

    Only solution vacuum all toner from supply tubes and install new developers and...
  14. Replies
    4
    Views
    371

    [Dead] Re: Error Code 03-565-00 in WC 7530

    Please "REMOVE FAX CARD" and confirm it's removal.

    Then try the machine agian.

    Please take picture of the error code on the UI and post.
  15. Replies
    4
    Views
    371

    [Dead] Re: Error Code 03-565-00 in WC 7530

    Just out of curiosity, Have you tried disconnecting network and only using it as a copier?

    I realize this is not a solution, but could be useful for troubleshooting.

    If it works fine as a...
  16. Replies
    11
    Views
    1,129

    Re: Xerox ColorQube 9303 Error: 093-553

    I apologize to all who viewed the correct code is 093-553.

    Sorry about that guys, my fingers and eyes betrayed me.
  17. Replies
    11
    Views
    1,129

    Xerox ColorQube 9303 Error: 093-533

    I have a service request for a Xerox ColorQube 9303 with Error: 093-533 on the display.

    The customer is approximately 100 miles away from me, so I am trying to decide whether to take the call or...
  18. Replies
    11
    Views
    845

    Re: Xerox color cube - findings

    There are good and bad things about the Solid Ink Machines.

    As for the power consumption that is absolutely "TRUE" Not only does it take up more electricity but it also "Purges" every time it's...
  19. Re: Xerox WorkCentre 7755 error 342-325 (342.325.00) Main Motor Failure

    Please re-read what "Xcopytech" said.

    Check the "imaging units" or "Developers Drums" whatever you want to call them, and check for Frozen, Stuck, binding, etc.. and replace whatever ones are...
  20. Replies
    1
    Views
    230

    Re: Xerox DocuColor 240

    Not to the best of my knowledge.

    The color drums still need to turn even tho you are printing just black and white.

    I had a customer with high volume black that I had to reset his drums back to...
  21. Replies
    18
    Views
    964

    Re: phaser 7760 qhality problem

    Start by resetting NVRAM in diagnostics.

    Perform a solid page test for all colors.

    Show results.

    You do have service manual for machine?
  22. Re: Error 04-563 and 04-561 in Web Display, Machine down

    Okay so did you replace the Black (K) Laser Print Head (LPH)?

    If so did it fix the problem?
  23. Replies
    5
    Views
    399

    Re: wc 7535 developer problem in black

    This is why "nomenclature" is 35% of your test score for Xerox and IBM techs.

    The ability to accurately describe a problem is crucial.

    Explanations (and wasted time) by two responders to this...
  24. Replies
    14
    Views
    2,273

    Re: service plan code generator available

    Has anybody heard from this guy ?

    I emailed him three times and never recieved a reply.

    If not, a moderator should close this post.
  25. Replies
    1
    Views
    270

    Re: WC7835 Finisher unavailable

    I would clean and or replace the set clamp home sensor...this has happened to me twice and would cause the "Finisher Unavailable" message.
Results 1 to 25 of 156
Page 1 of 7 1 2 3 4