Search:

Type: Posts; User: mansart

Page 1 of 17 1 2 3 4

Search: Search took 0.06 seconds.

  1. Replies
    4
    Views
    200

    Re: "Please Wait" MX-M565

    HDDGURU: HDD Raw Copy Tool
  2. Replies
    6
    Views
    290

    Re: Sharp MXM264N Admin Password

    Power machine off
    Change Dip
    Power on
    Sim 24-30
    Power off
    DIP back to orig position
    Power on
  3. Replies
    6
    Views
    290

    Re: Sharp MXM264N Admin Password

    Is there a security kit? do a 22-10 to determine yes/no

    If yes I believe you are up the proverbial creek
  4. Replies
    3
    Views
    171

    [Misc] Re: MX-5141 dropping off network

    Under security settings..... disable all ports that are not in use

    Are these POE lines? if so place an inexpensive 5 port hub (switch) between machine and network

    Under Energy Save settings...
  5. Re: Sharp MX M363N firmware - need help please

    What are you getting for an error when you try to send?
  6. Thread: MX-M565

    by mansart
    Replies
    4
    Views
    305

    Re: MX-M565

    Go into sim mode and print out a 22-6

    Scan and post page 1

    Will see what we can do to help from there.
  7. Replies
    35
    Views
    2,171

    Re: scan to folder to PC ok, to lap top failed

    What version SMB does the MFP in question support?

    Is that version enabled on laptop?
  8. Thread: FTP Scanning

    by mansart
    Replies
    11
    Views
    655

    Re: FTP Scanning

    Quick 'n Easy FTP Server Lite
  9. Replies
    35
    Views
    2,171

    Re: scan to folder to PC ok, to lap top failed

    From PC......browse network.....
    Do you see the laptop?

    If yes....can you see the scan folder?....can you create a file in the laptop scan folder from PC?


    If no....make sure laptop is a...
  10. Replies
    12
    Views
    1,348

    Re: OSX 10.14 Mojave + Sharp MX2310

    I've seen no mention on the USA tech site.....

    There is a 10.14 driver available for the MX3640, wonder if that would work?
  11. Replies
    5
    Views
    206

    Re: Quick question for Hotmail users

    I'm using @live.com..... Emails appeared to have stopped Oct'17.......Started again this AM...however they are all being marked as SPAM, even after whitelisting "admin@copytechnet.com"

    I have...
  12. Thread: Got Email?

    by mansart
    Replies
    10
    Views
    478

    Poll: Re: Got Email?

    @live.com

    last alert received 2Oct18

    **edit** just received one this AM @live.com was in "Junk"

    Yes I will whitelist
  13. Replies
    8
    Views
    460

    Re: Skewed copies on a MX-654N

    With the above said......Can you make a copy while lifting up on front left corner of scanner....does this improve skew?

    If so next step is a muscle driven technical re alignment of scanner...
  14. Replies
    2
    Views
    228

    Re: APPD1_S on MX-5070

    Is there actually a piece of paper at APPD1? The "_S" indicates there is a piece of paper the "Still Remains" at this sensor.

    If there is no paper I would add an additional wrap to the actuator...
  15. Replies
    8
    Views
    460

    Re: Skewed copies on a MX-654N

    I would run through...
    ADJ 4A Scanner (reading) unit parallelism adjustment
    ADJ 4B Scan image sub scanning direction distortion adjustment
    ADJ 4C Scan image main scanning direction distortion...
  16. Replies
    20
    Views
    821

    Re: Sharp FX-18 Finisher problem

    I would do firmware first specifically this file.....
    41327

    I can't explain why runs on 4141 and not 5141

    If you think it is paper curl related look here.....look for post by mojorolla with...
  17. Replies
    20
    Views
    821

    Re: Sharp FX-18 Finisher problem

    The finisher running fine on the MX4141 and 5141 is a clear indication the problem does not exist in the finisher.

    You have a machine paper transport timing problem or a firmware mismatch.
  18. Replies
    20
    Views
    821

    Re: Sharp FX-18 Finisher problem

    Double check firmware.....you say in original post......

    "We have brought it into the shop and attached it to a Sharp MX4141 and it works fine. When we attach it to a Sharp MX5151 the problem ...
  19. Replies
    20
    Views
    821

    Re: Sharp FX-18 Finisher problem

    From the random thought department.....

    11x17 duplex saddle stitch ...... machine is running at full load ..... fuser is on constantly to maintain heat...

    What else is on same circuit?...
  20. Replies
    20
    Views
    821

    Re: Sharp FX-18 Finisher problem

    Do a 22-6 and post page one.....

    Typically the jam code displayed in the history is the sensor that "saw" the jam occur. At point of misfeed detect, machine stops. This "STOP" is not instant, so...
  21. Replies
    20
    Views
    821

    Re: Sharp FX-18 Finisher problem

    All your jam codes are well before the finisher.....

    41319
  22. Replies
    4
    Views
    484

    Re: email not working

    41298


    This is a Sharp bulletin regarding Office365 and email...... may be applicable to your problem
  23. Replies
    1
    Views
    312

    Re: Sharp MX-2616N blocky printing

    OSX 10.14 Mojave + Sharp MX2310
  24. Replies
    3
    Views
    349

    Re: MX-C312 print/copy quality

    Color PM shows it was done 7k ago....

    what was actually done? Drums and DV replaced or just counters reset?

    I would clean...calibrate
  25. Replies
    2
    Views
    280

    Re: Sharp MX6500/7500 Dev drive motors

    We have the same thing happening on the MX-xx70's

    See this thread

    Motors MX-4070
Results 1 to 25 of 402
Page 1 of 17 1 2 3 4