Search:

Type: Posts; User: dan7777

Page 1 of 20 1 2 3 4

Search: Search took 0.20 seconds.

  1. Replies
    5
    Views
    183

    Re: IR ADV C256 Feed Rollers

    The c250 said it was 300k on rollers and they get 100-200k. I use the c255 rollers and they get a little over 100k. Same rollers on c5560. I think realistic is under 200k.
  2. Replies
    2
    Views
    118

    Re: Jamming and freezing in IR3245N

    It may just need a touch screen in the control panel and not have anything to do with the jamming. If you can talk customer into using Letter R that model duplexes better. Make sure you have the grey...
  3. Thread: ir c255i

    by dan7777
    Replies
    4
    Views
    227

    Re: ir c255i

    My C250/350's seem to do this if they print on check paper. Try itb-tmg from 0 to 1 or higher. On the one I did this I have not been back to. It sets it to clean the belt more. They were billable and...
  4. Replies
    2
    Views
    104

    Re: canon ir3245 freezing

    Check and see if they have POE. Most places that have cameras have this. We had one we swapped machines with identical model and it locked up. Same thing happened to different machine. An advanced...
  5. [Dead] Re: Are Adv 4200 series fusers making life now?

    They seem to be better. I got a phone call from Canon after posting a picture of a 4551 torn fixing film. The guy said always update software. Software changes heat. This one got about 26%. It had...
  6. Re: 9301 CTD sensor cleaning message keeps comming back.

    Mine was traded in for a canon so not sure what was wrong.
  7. [Misc] Re: Canon IRC2230 shows out of paper tray 1 with paper in it.

    It was the bushing in top cassette feed roller was out of place. It tells lift to stop. No codes.
  8. [Misc] Re: Canon IRC2230 shows out of paper tray 1 with paper in it.

    Thanks. I changed out the assembly with the actuator. Could be a wire some where. Has me stumped and every one else I have talked to.
  9. [Misc] Canon IRC2230 shows out of paper tray 1 with paper in it.

    Original problem was tray one showed out of paper with paper in cassette. Found lift gear on cassette broken and when gear put in would lift, hear lift motor straining and then bang which I assume...
  10. [Misc] Re: how to configure SST with USB to Parallel ?

    I tried sst with a 5020 software and it said this windows (10) does not support parallel, use usb. But it had a network ip address. So I went to my windows xp laptop and it had Bi-Centro on the...
  11. Replies
    3
    Views
    191

    Re: Constant 0101 jams on a IR-Adv 400i

    The guide as the paper comes out of the feed unit that is spring loaded FM4-6574 has given me issues. I had one with a 0107 jam every day and a few 0101 jams that was the fuser. I finally put in that...
  12. [Misc] Re: how to configure SST with USB to Parallel ?

    I think so. Like the other poster said you could try it. I had to do it once and it worked but that was years ago. Maybe sst with a crossover cable would be best.
  13. Replies
    2
    Views
    208

    Re: CANON C7065 DEAD!

    Check the circuit breaker in back to see if it is off. If the green energy saver button is lit and blank screen maybe main controller 2. I have worked on a lot of these and not many power supply...
  14. Thread: E00075

    by dan7777
    Replies
    12
    Views
    1,501

    Re: E00075

    Behind the motor that drives the belt are two large screws with red paint (do not adjust color). Bracket up goes more negative. One is harder to see than the other but both the same size.
  15. Replies
    4
    Views
    342

    Re: Canon C5235 fuser unit

    I just replace the fixing film.
  16. Replies
    4
    Views
    345

    Re: iR 6565i problem

    That is the developer. A stirring rod breaks. They have a new style rod but I put in a new developer with the -020 at the end.
  17. Replies
    6
    Views
    455

    Re: IR Adv c2225 jam code 105

    I had to replace that sensor once for jamming there. It is hard to find as it comes on an assembly. I got the part number from someone who had same issue off the canon website. That was two years...
  18. Replies
    43
    Views
    2,040

    Re: Database Errors

    Thanks for that! I thought they kicked me and Phil off! No big deal for me. I am just waiting for a service call which I doubt I will get except for emergency on day before Thanksgiving. I was able...
  19. Replies
    4
    Views
    345

    Re: iR 6565i problem

    Turn off potential control, turn bias down as far as 150. My company uses generic toner but we have had new copiers with canon toner be light on set up. I was concerned this would not hold up copy...
  20. Replies
    5
    Views
    467

    Re: e001-0004 ir8295

    .

    Don't remember what the end code was but had a machine with e001 that only replacing the upper half of fuser fixed. It happened at least twice and customer had two machines and the other one...
  21. Re: iRA C5235i - Quality issue on the back only

    Secondary outer transfer roller in door. I am surprised it does not show on first side. I put one in a 7260 looked almost exactly like that only first side.
  22. Re: c9070 it make duble color (i cant auto correct color mismatch)

    We have had the developers cause auto correct color mismatch not to work. Get 12x18 paper and run test page 10 and if the edges of the colors are bad that is the developer to replace. The sensors are...
  23. Replies
    5
    Views
    394

    [CQ] Re: auto colour mismatch has stop

    First thing to do is clean patch sensors. I had one where I replaced cyan and magenta developers that were coding out and it worked after that. Another tech had one that replacing the black laser...
  24. Replies
    3
    Views
    292

    [Misc] Re: IRAC 5560 pop up box after scanning

    Yes.
    Do not remember exactly where. Suggest function\send. What a pain. I try and turn them off. Comes set up that way.
  25. Re: Canon Adv C5240 not seeing Windows 10 workgroup computers for scanning

    Something blocking it. Firewall, antivirus or something else. Sometimes we have to set up sharing permissions. Real pain as most people have no idea what is on their computer.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4