Search:

Type: Posts; User: allan

Page 1 of 20 1 2 3 4

Search: Search took 0.06 seconds.

  1. Thread: C287 Lock Up

    by allan
    Replies
    7
    Views
    129

    Re: C287 Lock Up

    Sounds like the PSU is doing fine. Never heard off this bad eMMC but i am the lucky one. Sounds like a plan.
    Disconnect every thing that does not assist in getting it to light up.
  2. Thread: Zimbabwe

    by allan
    Replies
    1
    Views
    99

    [WTF] Zimbabwe

    Check there is Zimbabwe at some civil war...
    Russia gets the worlds biggest platinum mine and Emmerson Mnangagwa gets lots of killer toys.
    It was a give away.
    Not sure where this is going to go? ...
  3. Replies
    1
    Views
    123

    Re: C3350 instal proper imaging unit

    Not on that model, unless you changed the chip.
    The C35 use to be random like a cyan toner...
    Color chip? You mean you found it like that?
  4. Replies
    6
    Views
    292

    Re: konica minolta -- bizhub fusers

    The 364 machines use lamps and the 554 use induction coils.
  5. Replies
    6
    Views
    292

    Re: konica minolta -- bizhub fusers

    If they are for the B454 B554 C454 C554 it will be tricky without a machine to fit them in.
    Had a manager order the wrong fuser 3 times in a row on those models...
    There should be like a white...
  6. Replies
    3
    Views
    164

    Re: trying to import address book bizhub 364e

    Only work on the same models.. There are ways around this.
    Create an address on the new machine and export to get the format.
    Using data administrator works for me.
  7. Replies
    23
    Views
    921

    [Jamming] Re: bizhub 423, 93-10 , Duplex/Switch Back

    Jip super quick to remove. Remove the fuser and then loosen two and remove two screws.
    This is a weird issue that happens to these machines is it runs the duplex past 500K...
    Every one that gave...
  8. Replies
    23
    Views
    921

    [Jamming] Re: bizhub 423, 93-10 , Duplex/Switch Back

    With this design they eliminated the solenoid driven gate. The duplex and the paper exit use the same path. Will post a video soon.
    The timing is so tight on the paper returning to the duplex and...
  9. Replies
    23
    Views
    921

    [Jamming] Re: bizhub 423, 93-10 , Duplex/Switch Back

    Any luck yet?
    Today the problem returned...
    So replaced the door harness with no luck then removed the inner door plate to get to the duplex actuator
    Found the door housing and the actuator shaft...
  10. Replies
    5
    Views
    229

    Re: ID toner once out of box

    Nope but it will not reset the level indicator before it gets the new bottle.
    In my experience its all the chip does, even glued chips to bottles before to convert....
  11. Replies
    12
    Views
    248

    Re: Bh 451 image offsets on duplex second side

    If you have a spare HV board give that a go. Make sure there is no current leak or poor connection somewhere.

    Try a different transfer roller.
  12. Replies
    12
    Views
    248

    Re: Bh 451 image offsets on duplex second side

    Could help.
    You can adjust the transfer fine adjust on each side.
    Its under <Image Process Adjust> <Transfer Fine Adjust>
    Worked for me before.

    41460

    From a 452, 451 manual is corrupt......
  13. Replies
    5
    Views
    229

    Re: ID toner once out of box

    Those bottles can be modified to work on each other...
  14. Replies
    12
    Views
    248

    Re: Bh 451 image offsets on duplex second side

    Any warning codes(oil can icon) on the machine?
  15. Thread: Rebadged Lexmark

    by allan
    Replies
    6
    Views
    343

    Re: Rebadged Lexmark

    Absolute crap supplied by KM.
    Its the "OEM" toner!!!!
    Tested it by replacing the toner with TN113!
    Take the drum in question and strip and vacuum out the toner roller assy and toner tank fill...
  16. Replies
    3
    Views
    215

    [Dead] Re: Bizhub c35 dant print out

    Print with authentication?
    Wrong print driver?
  17. Replies
    3
    Views
    215

    [Dead] Re: Bizhub c35 dant print out

    Have you switched it on and off again?
    Strange looking C35...
    Dant help you there.
    Any of the life counters run out any red flashing lights anywhere?
  18. Replies
    8
    Views
    295

    Re: Bizhub HDD backup utility

    Then better to remove the HDD and use disk image utility?
  19. Replies
    11
    Views
    747

    Re: Is this customer crazy? Bizhub C364e

    Check out the jam code on that. Sounds curious.
    Those additional trays are semi-direct drive and needs power to the steppers to move the paper.
    Have seen them feed the next sheet in the tray where...
  20. Replies
    15
    Views
    704

    Re: COPIER DESTRUCTION!

    Have you seen the e-waste issues in India. Its next level.
  21. Thread: Cost to Operate

    by allan
    Replies
    2
    Views
    202

    Re: Cost to Operate

    Always end up doing my own with known performance on parts and over extended for overuse.
    Work straight from the PM schedule.
  22. Replies
    60
    Views
    3,038

    Re: Repair Guy Uses Tons of Paper

    The newer generation machines like the KM 754e does real well in public environments in comparison to say a KM 751.
    The old style high volume is a pain for an end user.
  23. Replies
    15
    Views
    704

    Re: COPIER DESTRUCTION!

    Mods?
  24. Replies
    15
    Views
    704

    Re: COPIER DESTRUCTION!

    We run those 223 machines up to 2Mil. Easy machines!

    Use to carry machines up to the 2nd floor balcony drop them from there into the court yard for some revenge and fun before driving them of to...
  25. Replies
    12
    Views
    704

    Re: bizhub 454/458 Developer

    Ooo ok now i get it. So say the dev you add has a TC ratio of 10% and you initialize it it will read and determine that it is 6.5%. The factory premix is at 6.5 so the machine will calibrate against...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4