Search:

Type: Posts; User: petermays

Page 1 of 2 1 2

Search: Search took 0.05 seconds.

  1. Re: What is the dumbist customer comment/question you've heard?

    I got a call that black wasn't black.when I got there the colour was more a grey blue colour.
    after thinking about this I found that the black in the dev was that colour..
    wondering how that...
  2. Re: Scan to email problem with Multixpress c9201

    hi,if all settings are correct in mc thens its a server issue.IT will never say they wrong.scan to mail is the most easiest thing to set up if you have all the right settings.

    maybe use has...
  3. Thread: HD clone

    by petermays
    Replies
    2
    Views
    318

    Re: HD clone

    sorry I must just add.a IRA52 series hdd cant be cloned.you will need to use a gen1 black and white mc to format the new hdd and then you put it in your 52 series and then do firmware.
  4. Thread: HD clone

    by petermays
    Replies
    2
    Views
    318

    Re: HD clone

    hi
    yes you can clone HDD. you just need a good duel hdd cloner device and a blank hdd.just remember if your mc HDD is a 320 gb you cant use a lower gb hdd.i use a Samsung 500GB HDD
    CLONING DEVICE...
  5. Re: Canon ImagePress C7000VP - Installation Assistance Needed

    in south Africa before we even sell one of these machines a site inspection is done and client needs to put a clean 3 phase power point in.very important.anything less will result in power issue
  6. Replies
    11
    Views
    1,244

    Re: iR1730i Drum Detection Error

    yip.i used a cable tie on the front drum shaft just to push drum against contact for this issue..think that's even cheaper then your $1.20
    never used a bushing.think ill give that a go next time.
  7. Replies
    20
    Views
    1,518

    Re: Black on IR C5030

    You a typical asshole arnt you.yes.you can take the drum out of the bk unit and put in a colour unit for testing.yes.voltages between bk and colour are differwnt but to test you can.i see you dont...
  8. Replies
    13
    Views
    1,481

    [Misc] Re: Canon IRA C5235i Slow Prints / Copies

    hi

    if its slow without network cable plugged in and copies aswell.then it might be the HDD.try do a firmware over ride all update.
    if that doesn't work you might need to do a format then update....
  9. Replies
    2
    Views
    289

    [Dead] Re: Faulty Flash PCB on Canon IRA C2220i

    hi.if you wanna order a flash pcb you need to mail canon Europe details of mc and reason and they will set one up and send to you.
    what is the error code.there is a way to reset old pcb if its not...
  10. Replies
    20
    Views
    1,518

    Re: Black on IR C5030

    hi there..yes you can swop drums.yes voltage between the bk and the colours is different but fot test purpose 1 page wont cause any issue.if you take off circlip and remove rod drum will come off.as...
  11. Replies
    22
    Views
    1,953

    [Misc] Re: Mac Address 0000.0000.0000 in iR-ADV C2225

    hi..yes I agree.i would do a system clear of mc and reboot.

    also use laptop and connect to point to see if it gives ur laptop a reading.
  12. Replies
    20
    Views
    1,518

    Re: Black on IR C5030

    remove drum and swop with magenta and test to cancel out drum.can be dev aswell.so if you really want to test dev you can swop magenta and bk.1 skrew and clip.then it will fit..just put tape over...
  13. Replies
    5
    Views
    603

    [Misc] Re: Canon IR2525 Print Outs very light

    helo..yip toner save is most prob on.go look in your printer settings
  14. Re: C5305 ImageRunner Advanced Scanner/Copier Feeder

    hi..if multiple pages are picked up then its the separation pad.replace and check the feed roller and pick up
  15. Replies
    6
    Views
    610

    Re: Corner of paper folded over Canon c7055

    hi.easiset way is to stop mc at diff points and see at what point it folds.at pick up.....at pre reg unit....before fuser....after fuser etc. will break down your search but its most prob at pre...
  16. [Jamming] Re: ImageRunner Adavance C2225i - Cannot remove ITB assy.

    hi there..this might be a stuiped question...when you opened the right door...did u press clips to open right door fully.if you just open it to clips then ITB is still engaged.
  17. Replies
    7
    Views
    657

    [Error Code] Re: Canon ir 2535

    hi there..IF THE SCREEN SHOWS A E280 then that's your error you need to sort out.its a communication error between scanner unit and mc.
    firstly look at ribbion cables. also there should be a sub...
  18. Replies
    18
    Views
    1,386

    Re: Help!! iR C3080 Machine

    hi..has this been sorted yet?there should be a closed button so if problem has been sorted we all know..if it hasn't and looking at all whats been done then it could be a processing problem.pcb in...
  19. Replies
    5
    Views
    490

    Re: Canon c5051 to much magenta color

    hi..this is abit confusing..did you take ;parts to a diff mc and did the same or did you bring parts from another mc?if mc is giving you a -7.3(not enough toner in dev unit) in dens then the mc...
  20. Replies
    19
    Views
    1,489

    [Misc] Re: Black Strikes on prints Canon IRADV C5051i

    morning all..to me...it seems the spots are from the ITB CLEANING MECH..The milo strip out of place so toner falls out.pls do a pg16 on mc.pg10 sample you cant see fault properly.seems your bk drum...
  21. Replies
    181
    Views
    29,704

    Re: What's the most whack customer description???

    logged call as mc is dead and 5 ppl have checked plugs and power button...I got there and put the plug on.

    nothing beats the dumb look on there face when they say that they tried that
  22. Re: Cleaning developing roller on a Canon IR2525

    hi..normally with a generic toner the dev unit will cause a light image..then u would empty toner clean dev roller with a clean cloth and either add toner or put a new toner in and add.i have have...
  23. Replies
    3
    Views
    376

    [Misc] Re: Noisy mc Canon irc 1325 or Iradv c250

    hi..yip you right.noise is the fuser drive and after awhile a E009 appears.i replaced drive and poof all problems solved..there was a bulliton out about it aswell.
  24. Re: Advance C5030 with groaning sound in standby.

    hi..fixing film rotates just before going to standby.yes if grease is dry mc makes 1 heck of a noise and vibration happens.also the pressure roller can cause it.surface becomes dry or bearings dry.to...
  25. Replies
    12
    Views
    1,199

    Re: iR ADV 9070 PRO Developer Unit

    Strange. Normally when hopper gear breaks it gives a E020 error.or at least a E020 err. But it's a machine..if it is hopper and you can't see a issue try a diff hopper.I have had issues where I...
Results 1 to 25 of 38
Page 1 of 2 1 2