Search:

Type: Posts; User: ReproKev

Page 1 of 8 1 2 3 4

Search: Search took 0.39 seconds.

  1. Re: c2230 not separating or offsetting pdf's from Mac

    Customer doesn't have any Windows PC's, only Macs running MS Office and Adobe programs....but no problems printing from Office.

    Small peer-to-peer office. all computers print directly to c2230.
    ...
  2. Re: c2230 not separating or offsetting pdf's from Mac

    I don't think posting a scan would help. There isn't a quality problem and if I scan in the printed pages, it'll just show single pages in a pdf file.

    The problem is that multiple sets are printed...
  3. Re: c2230 not separating or offsetting pdf's from Mac

    It happened with the full version of Acrobat Distiller so I had them download Reader DC and it still did it. Customer tried multiple pdf files too... same thing.

    This machine doesn't have PS or...
  4. c2230 not separating or offsetting pdf's from Mac

    Customer has multiple Mac's running well on OS 10.13.6.
    c2230 is running DC-Con v29.01 / MN--Cont v56.04
    UFRII driver v10.17.0

    Problem happens on the 2 Macs that I've checked. Microsoft office...
  5. [Misc] Re: On an IRC2380 I have a dominant of yellow,

    Set all the color density settings in the user mode to "0" and do a full gradation.
  6. Replies
    1
    Views
    217

    Re: Canon IR Adv 7065 i

    That's because the machine has an error code (check printer message at bottom of screen). Go to the "copy" screen to see what the code is.
  7. Replies
    5
    Views
    331

    [Error Code] Re: iRAC 5235i error code E020-0x91

    I've never seen that problem before, but I believe the drum driver pcb controls developing motors and toner supply clutches. At least it does in the c5035 series. I would start there.
  8. Replies
    5
    Views
    331

    [Error Code] Re: iRAC 5235i error code E020-0x91

    Take out the developers and manually rotate them to see if there is toner/starter in them. It's odd that all 4 would have a problem or be empty.

    Was the machine running previously or is it a new...
  9. Replies
    8
    Views
    563

    Re: Canon Ir adv 8205

    High humidity location? I had a similar E061 problem with a customer running a machine out of their home garage.Turn off potential control until the environment improves. Quality will probably suffer...
  10. Replies
    2
    Views
    307

    Re: Canon IR adv 7065

    Did you get the black hopper repaired or replaced?

    The hopper won't be able to grab the end of the toner bottle, lock it in and and pull it open until you do.
  11. Re: Part # c7055/c9065/c7060 Manual feed guide

    Update - I was told the part is discontinued. Odd, because it's the same part used on the c7260's and they're not that old.
  12. Replies
    5
    Views
    457

    Re: CANON IR ADV c 7055

    I agree with it being toner clumps in the Magenta developing assembly. As far as I know, there is not starter available to do a developer change like you could on the old CLC's.

    You need to get...
  13. Replies
    4
    Views
    358

    Re: Canon IR Adv 7065 i

    There's a gear with one way bearings in it (FU6-0584) in the black hopper assembly that cracks causing the door to not open. Big PIA to replace but at least it's not one of the color hoppers, they're...
  14. Replies
    15
    Views
    911

    [Error Code] Re: E020-391 IR5030i

    Check the rear of the cyan developing assm. It's common for the white "plus" shaped drive part to break. There's an updated part with a pin available for it.
  15. Replies
    4
    Views
    834

    [Error Code] Re: Canon ir adv 7565 E009 0501 Error Code

    Does that pdf apply to a c7065 as well? If so, can you put it up again?

    Just got a call for that code and a search before heading out lead me to this post. I haven't seen this code before and...
  16. Re: Part # c7055/c9065/c7060 Manual feed guide

    That's where I ordered it from. I'll post back when I get it whether it's the correct part or not.
  17. Re: Part # c7055/c9065/c7060 Manual feed guide

    Thanks!! That's exactly what I needed!
  18. Re: Part # c7055/c9065/c7060 Manual feed guide

    Thanks, but it's definitely the part I circled in the pic I posted. It's the center one of the 3 paper guides that sit below the manual feed roller and are accessed with the mf door open. It has a...
  19. Part # c7055/c9065/c7060 Manual feed guide

    I can find the part in the manuals but no number associated with it.

    It's the center paper guide directly under the manual feed roller. It has a thin metal plate on it that gets damaged over time...
  20. Replies
    6
    Views
    525

    Re: IRA-8095 FM30 location

    Turns out it was one of three fans that are hidden inside the filter box that you swing out of the way to get to the corona/drum area behind the front door.
  21. Replies
    6
    Views
    525

    Re: IRA-8095 FM30 location

    I'll check there too. Thanks.
  22. Replies
    6
    Views
    525

    Re: IRA-8095 FM30 location

    I just pulled the laser on another customer's 8585 (basically the same machine) and didn't see any fans in there. I'm heading back out today and I'll double check.
  23. Replies
    6
    Views
    525

    IRA-8095 FM30 location

    Copier has an E820-0000 code for the developer lower cooling fan FM30. I ordered the fan, went to install it and can't locate it's placement. The service manual location pic makes it look like it's...
  24. Replies
    6
    Views
    1,482

    [Error Code] Re: E025-0410 / iR-ADV C70xx

    I've replaced that gear many times and keep them in my car stock. I'd love to know how to replace the gear on the three color hoppers without taking the triple hopper assembly out. Can you give...
  25. Replies
    2
    Views
    305

    [Misc] Re: CLC 3200 - Stripe down copy

    Could also be the cleaning assembly. If the blade is starting to turn yellow or if it's old, replace it.
Results 1 to 25 of 191
Page 1 of 8 1 2 3 4