Search:

Type: Posts; User: guitar9199

Page 1 of 20 1 2 3 4

Search: Search took 0.14 seconds.

  1. Replies
    5
    Views
    194

    [Jamming] Re: CFU AM1 Adv C 5560

    If you're still using the FC6-6661-000 separation roller, don't. We used to have a TON of issues with those.

    The paper feed roller (FC0-5080-000) can be used as both Feed AND Separation. They...
  2. Re: Creating SMB Scan to File on Windows computers

    Yeah... I have a tendency to OVER "Man-splain" sometimes...LOL!!

    I did neglect to add a note to make sure the network connection was configured for "NetBIOS over TCP/IP". Micro$oft has decided to...
  3. Creating SMB Scan to File on Windows computers

    Hey Troops,

    With all the posts regarding Windows SMB not working lately (Thanks a BUNCH Microsoft!!), I was reminded of a step-by-step walkthrough I created for new techs on how to configure SMB...
  4. Replies
    8
    Views
    193

    Re: Ricoh MP c8002 / 6502

    The only thing I've seen regarding "Brand" on any of the Savins or Ricohs I have out in the field is SP 5907. All that does as far as I know is changes the brand displayed in the Web Image Monitor....
  5. Replies
    8
    Views
    235

    Re: Canon IRC3080 tray 1 multifeeding

    I THINK 2, 3 and 4 can be swapped...but IF I remember correctly, Cassette 1 PFU is its own creature. You'd have to switch out some of the hardware on it for it to work in 2 or otherwise.

    ...like...
  6. Replies
    2
    Views
    171

    Re: Service reports

    One report that's helpful is called a "P-Print". STRONGLY recommended one of those gets printed before the machine ever gets sent out. Those are all of the internal Service Mode settings, which if...
  7. Re: Sharp MX M363N firmware - need help please

    You might also want to specify whether or not your machine has the Data Security Kit installed. That's different firmware than what's on the base machine, and it'll save you some time at the...
  8. Replies
    4
    Views
    295

    Re: MPC6003 Jam code 001

    Stamp holder door on the ADF is probably open. Close it and you should be good to go.
  9. Replies
    4
    Views
    267

    Re: No by pass select screen irc 5051

    Service Mode>Copier>Function>CST, and look under the MF (Multi-Feed) settings adjustments. A4R, A6R, A4, Once you set all of those, the "adjust side guide" message should go away.
  10. Replies
    4
    Views
    293

    [Misc] Re: Non-Contract Machine Procedures.

    We're a smaller shop. (Sometimes it's just me out there...LOL!). The way we do it is we charge a flat rate for a repair estimate. Don't quote me, but I THINK it's $75?...
    (I don't set the...
  11. Replies
    35
    Views
    1,984

    Re: scan to folder to PC ok, to lap top failed

    Sounds like the dreaded "NetBIOS over DHCP".

    Go into your Network and Sharing Center/Wired or Wireless Network/IPv4/properties, click the "Advanced" button, then select the "WINS" tab and change...
  12. Replies
    8
    Views
    1,839

    Re: Ira c5051 e027-0100

    The Service Manual has a pretty simple walkthrough on removing the hopper units, beginning on page 396 (Chapter 4-133). Follow through all of the steps in order, and you should be able to replace...
  13. Replies
    8
    Views
    344

    Re: scanning large files (c2503)

    Most web based mail clients I believe throttle their email to a MAX size of 10 Meg. I'm sure there are some out there that do more...but that's usually what my default Key Op training says.
    ...
  14. Replies
    2
    Views
    277

    [Error Code] MP C4503/C6003 Firmware Bug!!

    Just an FWI.... The v1.39 System/Copy firmware on the Ricoh TSRC website for the C4503/C6003 (SD Card-Normal Panel) has a bug in it!!! Do NOT use it!! You'll wind up with an SC878-00 error!!

    If...
  15. Re: looking for some mac info for ipconfig and pinging a new account.

    Don't let it scare you. A Mac computer will pull an IP address from the router in the same way a Windows PC will. The operating system is different, but under the hood they all are just a bunch of...
  16. Re: Savin 9050 keeps asking for toner even though there is plenty of toner in the bot

    If you've already replaced the toner hopper with a new unit, I would suspect worst case the PCU is At/Near end of life, or BEST case the entrance from the toner hopper to the developer unit is...
  17. Replies
    6
    Views
    194

    Re: RICOH CW 2200 SP

    Sounds like the previous "owner" may have changed the SP Mode password. There is a way to reset it in Factory SP Mode, but I'm not putting that information out in the public forum. I'd suggest...
  18. Replies
    3
    Views
    190

    Re: Canon IR C2225 Error Code E000020-0290

    E020 0290 ATR Sensor (C) error or toner supply error




    Remedy
    1. Check if the Drum Unit (C) is installed.
    2. Check the Drum Unit Relay PCB (C) (UN28)
    3. Check the Drum Unit Memory PCB (C)...
  19. [Misc] Re: Twain do not work in windows 10 for KM 3500

    I've got several customer that need the Network TWAIN driver, but that's because they need to pull documents into very specific programs (Time Matters for example)

    Out of curiosity, have you tried...
  20. Replies
    5
    Views
    146

    Re: loginn sp mode ricoh cw 2200 sp

    What login were you trying to use... the older one, or the new one?
  21. Replies
    2
    Views
    156

    Re: Ricoh 2060 Op Panel

    A229 5216 Touch Panel
    B188 1414 LCD:Sub-Ass'y
  22. Replies
    4
    Views
    266

    Re: ricoh mpc 6502

    Out of curiosity, have you tried rotating the coupling by hand to see if the left gate moves freely? I had one where a previous "tech" had removed the tandem tray from the machine, and when he...
  23. Replies
    16
    Views
    1,120

    Re: Control Panel Advise

    I've converted a couple of machines to SOP v1, and it's definitely a lot of "hoops" to jump though. If it's already got a normal operation panel and it's working, why mess with it.

    The SOP v2...
  24. Replies
    2
    Views
    152

    Re: mpc3004 printing in TAS software

    Some programs will override your printer driver settings, and THEY will control the trays, simplex/duplex, and color options...regardless of how you have the print driver set. I've also seen...
  25. Replies
    7
    Views
    241

    Re: BAD HDD Imagerunner (advanced) 6255

    You can't use Updater unless you've already got the operating system installed. USB works though....I'd forgotten about that option. I'm too used to using SST.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4