Search:

Type: Posts; User: darry1322

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds.

  1. Replies
    14
    Views
    2,093

    Re: Bizhub 224e crooked prints.

    A guy in our shop was telling me this morning about a Bizhub he was working on ( not sure which model) that was skewing from tray 1 only. Ended up cleaning the metal roller behind the registration...
  2. Replies
    2
    Views
    174

    Re: CS 5002i loud noise

    Waste toner is augered from behind the black drum across the back of the machine to the waste toner bottle assembly. The drive to the waste system comes from the same drive unit that drives paper...
  3. Replies
    23
    Views
    880

    [Jamming] Re: bizhub 423, 93-10 , Duplex/Switch Back

    I have no suggestions beyond what's already been posted. Just wanted to say that's a damn fine write-up of the situation.
  4. Re: Background after drum change on kyocera Taskalfa3252

    This might help ... Kyocera Taskalfa 3252ci background and error codes


    Specifically this from bush-tech : "I was hoping the rest of this thread would magically appear just like it magically...
  5. Replies
    30
    Views
    3,495

    Re: *&%&%& 3050ci with skewed image.. HELP

    Assist rollers and pulleys in the first PDF are only on the 45 and 55 ppm machines. Numbers 7 and 8 in the drawing have asterisks to note.
  6. Replies
    3
    Views
    423

    Re: KX driver vs XPS

    Use XPS drivers when printing XPS documents (never) and KX for everything else.


    XPS is a format developed by Microsoft to compete with PDF.
  7. Replies
    33
    Views
    1,684

    [Misc] Re: Transfer Roller damaged, damaging Drum Unit

    The usual problem is that the rear developer unit spacer wears down causing the space between the developer brush and drum surface to be reduced enough that the developer brush starts to wear down...
  8. Replies
    23
    Views
    1,341

    Re: Konica Minolta bizhub 558 firmware

    Same here but everyone in our shop gets full access to mykonicaminolta.com as soon as they start work.
  9. Replies
    23
    Views
    1,341

    Re: Konica Minolta bizhub 558 firmware

    www.mykonicaminolta.com
  10. [Error Code] Re: Task alfa CS-6002i S001 on U412 after installing maintenance kit

    Make sure your paper is in the tray straight and all print alignment has been done. Lead edge, trailing edge, centering .... etc.
  11. Re: bizhub C360 with "document size cannot be detected etc

    Make sure the adf is sitting square on the machine. I've seen people grab the adf and use it to move the machine and get the adf "out of square". The reed switch for the adf closed state isn't...
  12. Replies
    13
    Views
    962

    [Misc] Re: Kyocera M5526 Printing half speed

    Printing on media types like thick and cardstock will slow print speed. Also quiet mode will slow the speed.
  13. Replies
    10
    Views
    1,014

    Re: TASKalfa 3051ci developer or drum issue

    Damp cloth with plain water.
  14. Replies
    11
    Views
    542

    Re: 284e B&W F/W update gone wrong!

    I'm not familiar with the cause of your issue and using the reset is always a last resort measure. I have no idea if it will resolve your issue.

    A161FFW bizhub...
  15. Replies
    2
    Views
    259

    Re: CS3010i DATA MIGRATION TO CS3212i

    You can't use 917 to directly move data from one model to another. They have to be the same model for that.

    You can use the Setup Tool to convert from one model to another using the 917 exported...
  16. Replies
    11
    Views
    542

    Re: 284e B&W F/W update gone wrong!

    From Google Translate :

    "good morning
    I have encountered this problem in c364e equipment
    try these steps


    Reset tool
  17. [Misc] Re: SCS 4550ci Cannot perform Toner curve adjustment message

    Make sure your print alignment and color alignment are good. I had one machine that was off on lead edge timing and wouldn't scan the charts correctly.
  18. Replies
    3
    Views
    470

    Re: Taskalfa 300CI jam 31, firmware

    I had a 3051Ci once that got the Low Voltage PWB replaced and one of the small connectors got overlooked and wasn't plugged in. Turns out that's the connector that supplies wake-up power to the...
  19. Re: Black trails, dirty aspect : cyan’s or black Image Unit problem ? Or other ?

    Similar to what you see in this video. Although this usually only repairs light streaks in the print not dark streaks.

    For the c552 the wand will be in the top paper tray underneath a cover.
    ...
  20. Replies
    49
    Views
    10,608

    Re: Kyocera - Fleet Services

    admin
    admin#1234
  21. Replies
    8
    Views
    1,121

    Re: Updated Firmware for Bizhub C550

    It's been over 2 and a half years so they may be OK by now.
  22. [Misc] Re: Kyocera KM-2560 acceptable # of scan/prints for it's age before retirement

    Don't forget the operation hours on things like boards, panel, and HDD. Those things are page count independent. As long as the machine is powered on they are aging.
  23. Replies
    2
    Views
    202

    Re: Unable To Get to SM on KM 363

    This also occurs if a job ( like a fax) is in memory.
  24. Re: Kyocera KM-4050 Cassette 1 tray wont open (Copier Moved with Paper in Cassette)

    It's been almost 4 years, hopefully they got it resolved.

    Someone else might find your tip useful though. Welcome aboard.
  25. Replies
    4
    Views
    435

    Re: CS3050ci scan issue

    A few more details about the relationship between you, your boss, the customer, and the smtp server might be helpful.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4