Search:

Type: Posts; User: Desert Rat

Page 1 of 20 1 2 3 4

Search: Search took 0.07 seconds.

  1. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Kiran,
    I got the thing fixed. I'll bet they thought they had the tensioner Murphy proofed, but I showed them wrong.
    Precision roller does carry just the tensioner for around $20 or so I forget. ...
  2. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Well, I got the carriage out and looked at the bottom and it seemed clean to me. The sensor also seemed clean behind the shutter.
    nothing unusual. Then the center piece for the tensioner pully...
  3. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    I ran the calibration for the sensor and it passed and the shutter never opened either. When is it suppose to open?

    I got the carriage out enough to access the shutter and it pulls out fairly...
  4. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Thanks for the tips. I'm here now and the customer just printed a nice poster and the shutter never opened. I assume the spring on the right side is to close
    the shutter? It also looks like it...
  5. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Kiran,
    After looking at those pics of the shutter ope and closed, I can't recall seeing it in the open position.
    I need to take it out for cleaning and make sure it opens smoothly.
    And thanks for...
  6. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    No I have not ordered another encoder yet. I'm hesitant to do so after today. It has to see the encoder otherwise the prints would not look so good, correct?
    I would be interested in that color...
  7. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    I spent some time on this to double check things. I ran the carriage test from diagnostics. Here are the results.

    1) the carriage pca revision is 2.313 The book sez it should be between .0823...
  8. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Kiran,
    Yes the first pic shows the stub on the carriage, mine is still there. That second picture is that of a Z3200?
    I ask because I noticed the end of the encoder strip is positioned same as...
  9. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Kiran,
    That is the part number I ordered. I'm thinking the next step should be to replace the carriage PCA. May be it got an esd discharge from the vacuum. Although
    it is a grounded unit and I...
  10. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Kiran,
    I agree with your last post about the firmware. I wasn't looking forward to that anyways.
    On my last visit I got some numbers off of the encoder strip. Nothing that looks like the part...
  11. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Lance15,
    That makes sense. I've seen it do this a couple of times. The first code I got after doing the work was the 79:04, generic firmware.
    I do have a firmware file for this machine. I will...
  12. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    First I ran the paper drive and it passed. I have all the numbers written down if needed just ask. I ran all the tests without paper. It also passed the star wheel lifter test.
    It passed the PRS...
  13. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    I'm going back again today to re-run the tests. I took some notes yesterday. I will post more later today. One thing though, the customer did run some prints and they came out very nice.
    That's...
  14. Replies
    2
    Views
    253

    Re: BH423 theroy manual

    tsbservice,

    Thank you for the PM. As it turned out all I needed to do is reset the machine by holding down the utilities key and powering up.
    Once I did that it acted normally. But I still...
  15. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Thank you so much for these posts. The customer just informed me that the cutter hanger broke.
    I can only assume he was desperate and was trying to use it. He said he ordered another.
    Yes, I'm...
  16. Replies
    2
    Views
    253

    BH423 theroy manual

    I trying to get a hold of the theory manual for the BH423. I Have a customer with one that just came up with a C6103 code
    and it would be nice to know all the details of operation. I have the...
  17. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Day what ever it is on this thing.

    So I replaced the encoder strip, no problem and started to run the calibrations. OK so when I power it up it goes through the scroll 100%
    and starts the...
  18. Replies
    1
    Views
    222

    BHC360 drums

    Can the black drum be used for all the colors if the chip is changed?
    This would help my medical office account.

    Thanks

    DR
  19. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Kiran,
    I unplugged the prt mech bd & pwr'ed up. I got a 22.1:10. Pwr'd down and unplugged both prt mech bd ribbon cables. Got a 1.1:10 code. Pwr'ed down and reconnected prt mech bd and pwr'd...
  20. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    I don't always like the answer, but I have to agree on the vagueness.:(

    DR
  21. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Kiran,
    I will give that a try. Why would it be hard to tell?

    DR
  22. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Thanks for your reply Lance. So do they just go out or does something usually happen? When I run the Electronic modual test it
    errors out with that 79:04 code.
    Is their any other way to verify...
  23. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Sorry to not get back to you right away. I am not an IT tech and stumble through stuff like this.

    Lance, I do have a fat32 thumb drive with the firmware unzipped and there is nothing else on the...
  24. Re: iRA C5235i - Quality issue on the back only

    Does it fuse correctly on the front side? No rub off?
    My first impression was a fuser problem. What happens if you make a white copy after
    the first duplex page? Does it show any ghosting of...
  25. Replies
    9
    Views
    593

    Re: Canon IR C3220 jamming

    I have not seen one of these for a couple of years. According to the Svc manual, the jam codes
    break down like this:

    first part of the 0107 means a delay in the sensor actuation. A slow feed...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4