Search:

Type: Posts; User: Arkynsaw

Page 1 of 2 1 2

Search: Search took 0.08 seconds.

  1. Replies
    3
    Views
    213

    Re: Samsung 9301 error code A1-4310

    Oh sorry was in the midst of other things , seems you already knew what I posted .
  2. Replies
    3
    Views
    213

    Re: Samsung 9301 error code A1-4310

    I found this page , seems reliable . Error Codes > Samsung > CLX9301NA > Code A1-4310
  3. Replies
    2
    Views
    165

    Samsung SCX5835 04-000

    Customer called , said they had an error 04-000 showing , they said they had found info online that it was an LSU problem . I told them I would get back to them . I have the service manual , I even...
  4. Replies
    5
    Views
    356

    CS 3035 PCQ Black Band with ADF Only

    Checked and cleaned machine , including optics and the charge unit . Optics were dusty dirty , not the problem though . Ran some pages from SP 001 , they were fine . Copies from glass were fine also...
  5. Replies
    0
    Views
    326

    4600 MFP unit error 843.00

    Customer called in the base model number , C782n . I have never seen this configuration . Customer had been quoted for entire scanner unit by another vendor , but when looking under the glass , you...
  6. Replies
    3
    Views
    434

    MP C3000 right side door won't close

    I went out to install a black toner pump , easy enough . This is a new customer , had not serviced there unit before , someone else had diagnosed the toner pump and the customer had ordered it . In...
  7. Replies
    2
    Views
    331

    ImagePrograf iPF710 Error

    1st of this model for me , have done HP plotters . Customer says they recently replaced the print head and the maintenance unit . Shortly after they started to get a hardware error : 03130031-2618 ,...
  8. Replies
    1
    Views
    433

    500 Color MFP M570dn Noise

    Makes a rubbing noise while printing , tried hand rotating TD units and pulled ITB and hand rotated it , not conclusive . Cheated the front door and tricked TD locks , ran unit while watching , tried...
  9. Replies
    2
    Views
    620

    CS-3501i Intermittent C6610 code

    Fuser Release sensor error , error was present when I arrived and happened for me . Pulled the fuser unit and removed the fuser release motor and hand turned the release mechanism , it seemed to be...
  10. Replies
    2
    Views
    295

    CM 1312nfi MFP Light pages output

    Has plenty of ink , black is new , has light print quality for all colors . Ran demo pages and supply pages , all colors light , ran through a 2nd side to check for moisture in paper , still the same...
  11. Re: When I post it shows as "printable view" only .

    Well this one seems fine .
  12. When I post it shows as "printable view" only .

    I can not respond to my own posts , not sure if anyone can , did I accidentally set something incorrectly ? Not getting any responses to my question or views . In the HP forum , was for an HP...
  13. Replies
    0
    Views
    90

    CM 1312nfi MFP Light print

    Has plenty of ink , black is new , has light print quality for all colors . Ran demo pages and supply pages , all colors light , ran through a 2nd side to check for moisture in paper , still the same...
  14. Replies
    0
    Views
    10

    [CQ] CM 1312nfi MFP Light print

    Has plenty of ink , black is new , has light print quality for all colors . Ran demo pages and supply pages , all colors light , ran through a 2nd side to check for moisture in paper , still the same...
  15. Replies
    5
    Views
    917

    Laserjet Pro M402dn false Jams

    As per customer , machine will intermittently show a jam on the op panel , but paper has not moved from the cassette . They check the paper path and then close the machine up and go . Feed tires are...
  16. Re: HP Color Laserjet 2600n Poor print quality

    It was doing it before I started the job , the laser box seemed to seat fine when re-seated , I remember re-checking it to make sure it was flush with the case . The interior of the laser box looked...
  17. HP Color Laserjet 2600n Poor print quality

    Unit came in with poor print quality , looked mostly like the faint print from fouled laser mirrors . Remove and clean laser mirrors and rest of machine , reassemble and test op . Nice and dark now ,...
  18. Replies
    2
    Views
    835

    Re: Epson WF-R4640

    Thanks Phil B , I did receive the link and downloaded the file , will get a look see and try to reply here when I get to the end of it .
  19. Replies
    2
    Views
    1,271

    Re: Dell 5130cdn noise tray

    So , here is the story . It came down to 3 parts , after digging through the service manual . Either the Paper Feeder Assy , Drive Assy PH , or the cassette . Decided to try the Paper Feeder Assy 1st...
  20. Replies
    2
    Views
    835

    Epson WF-R4640

    Having print quality issues , not getting good fill on the nozzle check and getting black streaks with kind of a swishy look , not consistent , like crud on the underside of the printhead . Tried...
  21. Brother MFC 8480dn ADF print quality problem

    While using the ADF , the machine will sometimes make an odd noise and then output either blank or all black pages , only very intermittently . Ran the feeder in 08 mode , no noise , paper fed...
  22. Replies
    2
    Views
    1,271

    Dell 5130cdn noise tray

    When using tray 1 top cassette , machine makes a ratchety noise , sounds like gears slipping . This does not happen with the 2nd /lower cassette , it sounds normal . I could not swap the cassettes...
  23. Replies
    1
    Views
    599

    [Jamming] Pro 400 Color M451nw

    Jams at exit , consistently , about 2.25 inches out of exit rollers . Sensors seemed to test fine . Replaced the fuser unit which has the 2 exit sensors , still doing the same thing . All settings...
  24. Replies
    7
    Views
    1,256

    [Jamming] Re: Pro 400 Color M451nw

    Nope , sorry , did further check , no TM or RM only an SM and I have it , HP can be truly confusing the way they now deal with service info .
  25. Replies
    7
    Views
    1,256

    [Jamming] Re: Pro 400 Color M451nw

    Nope , only a service manual for this one ,I do know that in some cases there are TM ( Troubleshooting Manuals) and RM (Repair Manuals) But as far as i know , only a service manual for this one .
Results 1 to 25 of 42
Page 1 of 2 1 2