Search:

Type: Posts; User: kingarthur

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. Re: MX-C300w keeps rebooting when network cable is plugged in

    Had this on a KM device, went round and checked all print queues until i found one with stuck jobs, cleared the queue and it was fine, discovered that KM print drivers hadn't been installed on her...
  2. Re: Can't connect to router or get outside network

    Don't know if this is relevant, or helps....I've just installed a C227 to replace a C224, both using the same gmail account, and both using the same IP, the new m/c would scan to email, kept getting...
  3. Replies
    7
    Views
    326

    Re: Bizhub 458e wrong toner

    1. Call the Service Mode to the screen.
    2. Call the Enhanced Security to the screen. (Stop -> 0 (Zero) -> C (Clear)
    3. Touch [Engine FW DipSW].
    This is displayed only when Switch No. "59" is set...
  4. Replies
    19
    Views
    1,009

    Re: new driver layout

    The amount of times I've seen this happen, I'm constantly having to "educate" IT people to untick "query the printer and automatically select the driver to use", the amount of customers who can't use...
  5. Thread: C454 toner?

    by kingarthur
    Replies
    8
    Views
    350

    Re: C454 toner?

    no it doesn't 513 is for the mono 454(e) 512 fits C454(e)
  6. Replies
    16
    Views
    1,118

    Re: Shoot myself in the foot? BHC353

    If I remember correctly, this model counts the bars up...and not down, as the new models do...could be wrong though
  7. Replies
    10
    Views
    455

    Re: C552 - error C3822

    Nice to see another Cornishman on here ;), ignore the serial no, p/no A0P0R73400, is an earlier version of A0P0R73433, as KM modify parts, they change the last 2 digits, try and get the latter if you...
  8. Replies
    14
    Views
    1,067

    Re: just curious...

    I remember changing master sheets on Sharp copiers every 7k, and then topping up with fuser oil too......
  9. Thread: C454 toner?

    by kingarthur
    Replies
    8
    Views
    350

    Re: C454 toner?

    TN512K will fit the C454(e) colour machine only, TN513 will fit the 454(e) mono machine only
  10. Replies
    26
    Views
    1,204

    Re: 758 with Jam 32-01

    There's a bulletin TAGB1900173EN, which states
    Cause





    Toothed drive belts for M31 and M32 inside the ADU are jumping, this can be detected by manually driving the drive gear.
  11. Replies
    6
    Views
    309

    Re: Scan to email BHC 364e

    When inputting the email address for sending, where it says "Input machine address" the email address goes in the box that says "Device name" the box marked "email address" is left blank
  12. Replies
    62
    Views
    6,262

    Re: Ever thought of ... different work?

    I thought like you, no way am I doing this job at 50, in my 41st year, I enjoy the job, have a great bunch of customers.....but... discovered how bad my bosses really are, and how I mean absolutely...
  13. Replies
    5
    Views
    245

    [CQ] Re: Biz hub C284 colours not lining up

    what adjustments have you ran from the manual, normally a initialisation & image stabilisation is enough...are there any codes when you go into tech rep, whats the consumables life etc... on only one...
  14. Replies
    3
    Views
    245

    [Misc] Re: C554e Firmware Issues

    As far as I'm aware, SSD is updated now with the mass production FW, bulletin number TNGB1400318EN ,
    this is the bulletin number TAGB1400537EN for the machine not waking up
  15. Replies
    3
    Views
    245

    [Misc] Re: C554e Firmware Issues

    when you say you've "checked the power save settings", have you set them to the following, "Enter power save mode" set as "NORMAL". "power consumption in sleep mode" set to "DISABLED", there was a...
  16. Re: C-364e, ran out of Cyan and burned out Developer Unit..

    We've had customers remove and shake the toner bottle, then refit it, the gauge goes back to 100%, if this is done often enough, you'll either get the C255* code or the dev unit will fail, which...
  17. Re: Customer question... Why do I get all the "Fun" ones??

    it depends on what the salesman means by "edit" on the KM MFPs you have "Preview" where you can rotate or remove pages, but that's about it
  18. Replies
    7
    Views
    310

    Re: Bizhub C554e PRCB Swap (used)

    I had a C454e which had misfeed problems, coming from the PC -410, it was actually that PCB, but thinking back, it was also misfeeding from tray 2, so it probably won't solve your problem...
  19. Replies
    7
    Views
    310

    Re: Bizhub C554e PRCB Swap (used)

    The last time I had a problem with a PC410 it was the small pcb above the other boards, A5AYH00501 PWB Assembly(PWB-EX), it's very easy to pull the connector out, especially if you're swinging the...
  20. Replies
    7
    Views
    513

    Re: C368 scan to 365 forward TX error

    It was working, using a different SMTP etc, then they had "Server connect error", so instead of sorting that out, their IT bloke decided to change everything completely, I'm trying to persuade the...
  21. Replies
    7
    Views
    513

    Re: C368 scan to 365 forward TX error

    Many thanks for your responses, I've looked at the network error code, which is 3025, which is "The SMTP server does not support the STARTTLS command". Whenever I've had a "forward tx error" it's...
  22. Replies
    7
    Views
    513

    C368 scan to 365 forward TX error

    hopefully someone can point me in the right direction, I'm used to setting up the "simple" 365 set up, using a specifically created email address & password on 365 for the scanner.

    The customers...
  23. Replies
    9
    Views
    689

    Re: Repaired MFPB c368

    If the codes are CC163/CC164 , the manual says wrong model of FW, the machine type information registered to the machine differs from the actual machine type
  24. Replies
    26
    Views
    3,865

    Re: C258 won't boot / stuck at 2 bars

    It was the DS board when I had a C368 doing the same, even when I told the m/c it no longer had an RADF, it still happened, I had to physically remove the board to stop it happening.
  25. Re: Konica Minolta Bizhub 227 blowing blue toner on paper

    The "cleaning stick attached to the front cover" is actually for cleaning the printheads and will have no effect on the drums/image units, which this machine takes.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4