Search:

Type: Posts; User: Santander

Page 1 of 20 1 2 3 4

Search: Search took 0.06 seconds.

  1. Replies
    10
    Views
    559

    Re: DP-7100 on 4002i

    You are not alone on this. Kyocera does not publish or notify dealers of tech bulletins any longer it seems. Case in point, the transfer pipe cleaning problem on some color machines, picked up the ...
  2. Replies
    14
    Views
    522

    Re: microsoft edge pdf print error

    If IT is managing 300 pc's, they are most likely doing it through Group Policy and making a change in the default pdf program could be pushed out overnight. If they knew what they were doing not...
  3. Re: KM3035 with "shadow: after changing drum, fuser + transfer unit

    When you say there is a shadow on the print, is it a repeat of the image or a background? As Blackcat said a sample of the image you are getting would be helpful in diagnosing the proboem.
  4. Thread: New Tech

    by Santander
    Replies
    8
    Views
    215

    Re: New Tech

    Welcome Aboard.
  5. Replies
    15
    Views
    1,061

    Re: Kyocera 4020 creasing paper

    Had the same situation on a different model a couple of weeks ago where every sixth or seventh print would show a crease. Sometimes just slightly and other times enough to distort the print. When we...
  6. Replies
    8
    Views
    336

    Re: TA 221 Lines on prints only

    Your example print shows only lines in the blank area of the form. If it was a print issue the the lines would be throughout the printed output of the form. How did they create the form, from a...
  7. Replies
    7
    Views
    207

    Re: N()()B tech here!

    Welcome Aboard!
  8. Replies
    3
    Views
    342

    Re: P-4536i scanning shortcuts

    Registering a shortcut is for one setting only. You are trying to set multiple settings which can only be done with a program key. Setup the job as you want it and then go to programs and register...
  9. Replies
    5
    Views
    205

    Re: Hello everyone!!!

    Welcome Aboard!
  10. Re: Taskalfa 3050ci printed image significantly darker than it should be

    Is the light/dark shadow of a specific color? Geo is correct, if you are using generic toner it is probably the toner causing the issue, generic toners do NOT do well in these machines. Since it...
  11. Replies
    5
    Views
    222

    Re: Greetings from South Africa

    Welcome Aboard.
  12. Replies
    16
    Views
    1,444

    Re: KM5050 jams halfway out of fuser

    An electrical noise-no, chattering on one occasion but very, very briefly.
  13. Replies
    16
    Views
    1,444

    Re: KM5050 jams halfway out of fuser

    That is the old number [rev. 2] current order number would be 302KS94320.
  14. Replies
    16
    Views
    1,444

    Re: KM5050 jams halfway out of fuser

    If you look at the paper exit assembly just above the fuser I suspect you will see a large amount of a "brown substance" [paper dust] adhering to the swing gates and other surfaces. After a while it...
  15. Replies
    5
    Views
    286

    Re: Kyocera F428 205C error

    Just a heads up on F248 error codes. Just learned this myself. Last week a major customer's IT department made the decision that all printers/MFPs should have static/assigned IP addresses, fine...
  16. Thread: Newbie!

    by Santander
    Replies
    5
    Views
    289

    Re: Newbie!

    Welcome Aboard!
  17. Replies
    9
    Views
    1,122

    Re: TaskAlfa 3252ci SQUEAKING

    I hate squeaks!!! Not on this unit, but had one on the previous model that drove me crazy, five calls for "squeaking". Except for the last call, every time I arrived the unit was not squeaking. ...
  18. Replies
    7
    Views
    346

    Re: 3500i missing options in service mode

    Do you have a fax option Installed? If the unit does not have a fax board installed the sim modes 600 plus will not display as there is nothing for the unit to do. If a fax option is installed, I...
  19. Re: CS1620 paper jams after changing drum unit

    When you removed the tape and cardboard cover over the drive coupling, did all the cardboard come out? Had one a couple of years ago where the drum unit in shipping had been mishandled and wound up...
  20. Replies
    9
    Views
    837

    Re: Customers with infinite toner

    As you said it happens less with monitoring, but it still happens more than it should. The ones that really get me are customers with rental contracts that include the machine, service and supplies...
  21. Replies
    6
    Views
    403

    Re: Hello from the UK

    Welcome Aboard!
  22. Replies
    6
    Views
    366

    Re: Hello everyone from Spain

    Welcome Aboard!
  23. Replies
    7
    Views
    395

    Re: Dallas, Tx Check In!

    Welcome Aboard!
  24. Replies
    4
    Views
    421

    [CQ] Re: TA 4550ci Poor Copy Quality

    Since you bought the unit used, does it have OEM toners? I would then try a developer refresh followed by a toner curve adjustment, both in the systems menu>adjust maintenance. You should also reset...
  25. Replies
    4
    Views
    350

    Re: Checking in from South africa

    Welcome Aboard!
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4