Search:

Type: Posts; User: Toxic

Page 1 of 9 1 2 3 4

Search: Search took 0.09 seconds.

  1. Replies
    1
    Views
    79

    [Misc] Re: C1085 Ripping Transfer Belt

    I would first check/clean/replace intermediate transfer steering edge sensor (PS68) and the intermediate transfer steering sensor
    (PS86).
    But if you replace whole transfer belt unit it should be...
  2. Thread: Warming up

    by Toxic
    Replies
    4
    Views
    219

    [CQ] Re: Warming up

    Did fuser get hot or not?
    Did you check fusing sensors readings is service mode?
  3. Replies
    6
    Views
    241

    [Misc] Re: Konica C1060L Bizhub Image problem Issue

    After replacing this parts i only do toner density sensor init,blade setting mode,color registration auto adj., and auto gamma adjustment and so far no problems.
    How you do calibration from glass?
  4. Replies
    6
    Views
    239

    Re: IC-408 Fiery, Shutsdown with copier

    I have few of this on the field and 1-2 are doing same thing,when main body shut down fiery also shutdown itself.
    Never figure out why is that happens on that 2 machines, not botehered me too...
  5. Thread: Warming up

    by Toxic
    Replies
    4
    Views
    219

    [CQ] Re: Warming up

    You could at least specify what model of KM.
  6. Replies
    13
    Views
    420

    Re: Bizhub 4050 scanner glass clean

    Did you try this?
    There must be some screws holding original glass cover and they should be on the bottom side of scanner body i suppose?
  7. Replies
    13
    Views
    420

    Re: Bizhub 4050 scanner glass clean

    I was afraid of answer like this ;)
    I am already cursing in advance :(
    Damn little things,already dont like this them like 3320,4020...same crap.
    Btw tomorrow have to go to do maintenance kit on...
  8. Replies
    13
    Views
    420

    Bizhub 4050 scanner glass clean

    I got few used 4050 and almost all have dirty scanner glass bottom side.
    Have a quick look at SM and it looks like whole scanner must be removed and still did not find procedure to remove original...
  9. Replies
    8
    Views
    413

    Re: BIZHUB 215 error C3452 right after power on

    How did you come to that conclusion?
    Did you try replace fuser,i never had problem with firmware on this low segment machines and dont think that is problem.
    You can find firmware on Infohub if...
  10. Replies
    8
    Views
    413

    Re: BIZHUB 215 error C3452 right after power on

    What is counter?
    Did fuser get warm at all?
    I would first try replace fuser or at least check termistors,it could be toner build up on them and act as isolator.
  11. Replies
    10
    Views
    811

    Re: Reinsstall System Software IC-408 Server

    System software should be on dvd because it is about 3.6gb iso image.
    I dont really understand what cd you hook over usb...
    Hook where?
    Explain little bit more understanding
    You can reinstall...
  12. [Error Code] Re: Konica Minolta BIZHUB PRESS C 1085 - C-2731 Error

    Do you have another same machine to try that old drums are they make same errors ?
    If you have another machine i also would try replace HVPS/3.
    What humidity machine shows on display,try to keep...
  13. [Misc] Re: C454 - Paper comes out curly (approximately from the half)

    I had similar problem on c203 with 1mil,it was fusing drive problem,worn bushings and scraped that machine,not worth repairing.
    But if you replace all that and does not solve problem i have no idea.
  14. Replies
    6
    Views
    746

    Re: Minolta bizhub 223 repair

    I do first drum dry from admin menu :)
    Probably it does not have important role but done that everytime on this series like manual says, old habit. :)
  15. Replies
    25
    Views
    1,517

    [Misc] Re: C6501 yellow lines and scratches on drums...

    If i see good you are using replacement drums,not complete OEM drum unit?
    Have you replace only drum or drum and drum cleaning blade because it looks like cleaning blade damaging drum?
    Can you wipe...
  16. Replies
    25
    Views
    1,517

    [Misc] Re: C6501 yellow lines and scratches on drums...

    Drum have contact with developing unit and transfer belt so did you check and replace something in TBU (belt,1st tr. rollers...) ?
    Is the damage visible and always on Y drum?
  17. Replies
    6
    Views
    292

    [Error Code] Re: Km C5501. 2414 error

    I think your solution is in this old but very good topic,read it carefully and i think you will solve this.

    C6500: Recurring C-2411
  18. Replies
    6
    Views
    292

    [Error Code] Re: Km C5501. 2414 error

    What procedure you follow,link or description...?
    Golden rule on this machines i always follow is to replace at least complete one color with new parts.
    That means drum,developer and charge unit at...
  19. Replies
    6
    Views
    292

    [Error Code] Re: Km C5501. 2414 error

    Did you replace drum K and what is life on other consumable parts?
    Did you follow procedure after replace developer to run toner density sensor initial auto adjustment?
    This is very important and...
  20. [Misc] Re: How much are companies charging for maintenance including toner?

    You miss most important info,what type of machines?
    But 0,04 per color is pretty much low however in my opinion.
    Are you use all OEM for maintenance?
  21. Thread: Rollers Cleaning

    by Toxic
    Replies
    15
    Views
    729

    Re: Rollers Cleaning

    I dont think we have globaly good quality paper in my region but almost all my problems with paper jamming from trays is because separation roller get "flat" spots on its surface.
    Of course it hold...
  22. Thread: Rollers Cleaning

    by Toxic
    Replies
    15
    Views
    729

    Re: Rollers Cleaning

    Last year i got bottle of some bad smell (like wd40) liquid for rubber rollers and it works good.
    Before that i cleaned rollers,glass,mirrors,... with mixture of 70% alcohol (96%) and 30%...
  23. Replies
    7
    Views
    374

    Re: Page Pro 1490 copy black border

    Lol,you are very right :D

    Its a CIS if i remember good.

    @Dumus
    Does black strip occur when copy from adf or just flatbed?
    Did you try scan,is it same?
  24. Replies
    4
    Views
    334

    Re: model 3602P toner

    This is info what i have for 3602p, tnp55 is a bit cheaper



    AADY050
    TNP55
    Toner Cartridge UAR
  25. Re: Bizhub C284? intermittent grey background 'clouds' please help

    Nothing can not be for sure just like we ussualy can not prove some problems without CSI technics :)
    In past 10 years i have minimum problem with developing units when use oem consumable.
    Have few...
Results 1 to 25 of 206
Page 1 of 9 1 2 3 4