Search:

Type: Posts; User: qtech

Page 1 of 2 1 2

Search: Search took 0.20 seconds.

  1. Replies
    2
    Views
    167

    Re: Older MJ-1103 Finisher part question

    Thanks much; that part number is not even in my Parts manual, but I probably have a first edition. I will give it a try......
    Your time & effort are greatly appreciated......
    Chris
  2. Replies
    0
    Views
    133

    Older DF-800 Finisher part question

    Greetings all,
    Working on a Kyocera TaskAlfa 650c (Toshiba eStudio 6520c box) and someone has removed the white ribbon cable from the Finisher Staple Unit running back to the board on the rear...
  3. Replies
    2
    Views
    167

    Older MJ-1103 Finisher part question

    Greetings all,
    Working on a Kyocera TaskAlfa 650c (Toshiba eStudio 6520c box) and someone has removed the white ribbon cable from the Finisher Staple Unit. Yes, quite surgically removed the cable,...
  4. Replies
    3
    Views
    386

    [Misc] Re: 3050ci scanner problem

    I seem to remember a customer experiencing this using the Kyocera Print Center app; I 'think' the OCR setting (or another setting in the app) was the culprit at the time.

    (A bad habit of mine is...
  5. Replies
    1
    Views
    327

    Re: KYOCERA M5521 CDW

    I only have a couple of them out there, but zero problems so far (40K and 60K). Very inexpensive dealer cost, but the toner costs are high (even for the high yield ctg; be careful if quoting a cpc...
  6. Replies
    8
    Views
    883

    Re: Aftermarket charge rollers.

    Same here, have ordered about 2 dozen from China with one bad one that was replaced at no charge on my next order. 10 to 21 day transit time, but an inexpensive alternative to oem. Still tracking...
  7. Replies
    3
    Views
    627

    Recent Win7 Scan issue

    Greetings all,
    Yesterday, January 9 2018, I had a dozen customers call with the always fun "unable to scan" issue. Hmm, a dozen accounts all at once? Seeing that Microsoft had sent out a...
  8. Replies
    10
    Views
    9,076

    [Error Code] Re: TASKalfa 5500i F247 Error

    My F247 (albeit with a TA 3550ci) was quickly resolved with a new HDD.....
    Chris
  9. Thread: F245

    by qtech
    Replies
    8
    Views
    1,489

    Re: F245

    I just had an F247 on a TA 3550ci, the first F24x code I had ever seen. Machine was frozen, could not get into Maint Mode no matter what I did. I took a shot (least expensive shot) and replaced the...
  10. Thread: Kyocera 4035

    by qtech
    Replies
    5
    Views
    618

    Re: Kyocera 4035

    Check lift motor also, have replaced many over the years.....
  11. Replies
    11
    Views
    2,665

    [Error Code] Re: Kyocera 820i C3900 Error

    Greetings all, I know this is an old thread, but I recently had a 3550ci throwing the C3900 code. No standard resets or FW upgrades would cure it, but replacing the ISC board did the trick for me....
  12. Replies
    14
    Views
    2,238

    Re: Kyocera 300I/ Copystar CS300I adf problem

    See this thread..........
    http://www.copytechnet.com/forums/kyocera-mita-copystar/95721-dp-670b-jamming-skewing.html?highlight=CS-300i+adf+jams
  13. Thread: KM2550

    by qtech
    Replies
    6
    Views
    550

    [Misc] Re: KM2550

    I have replaced many paper feed clutches on this series (1620/1650/2050/2550). Check Fuser Roller for contamination, order Fuser Right Assy or entire Fuser Assy to fix.
  14. Re: Unable to contact SMTP server...but only at night

    Yes, thanks Tony; I did mention to them that there may be an offline or sleep issue with their server. I am using an IP address to access the email server, which was changed about 7 months ago by...
  15. Replies
    12
    Views
    993

    Re: takalpha 650C fuer drive problemm

    Also....if entire assembly is required, purchase the Toshiba drive unit; it is less than half the cost of the Kyo drive.......
  16. Unable to contact SMTP server...but only at night

    Greetings all,
    I have a customer with an older KM-C3225E who can scan to email just fine from 7:00am to 6:00pm, but then machine displays "unable to contact SMTP server" after 6:00 or 7:00pm...
  17. Replies
    4
    Views
    471

    Re: Kyocera KM C2230 Image Units

    Yes, the IU assemblies are the same, but you need to swap out the small circuit board on the front of the unit. Search 'Kyocera KM-C2230' on ebay and you will find them (I bought a few sets, they...
  18. Re: paper misfeed in left door on kyocera km 2550

    Feed clutches do not last forever on this series; have replaced many over the years.
  19. Replies
    10
    Views
    2,926

    Kyocera P2135 violent self-destruct episode

    Greetings all, I hope this does not become a widespread problem with the P2135 printer. Unit was placed brand new, now 5 months old, 17K copies, customer reports jamming issue. I could not believe my...
  20. Replies
    1
    Views
    1,140

    [Error Code] FS-1035, C4200 code FYI

    Greetings all,
    I haven't replaced a Kyocera laser unit in quite some time, but encountered a C4200 on an 18 month old FS-1035 last week. Manual says bad BD signal, so I ordered the laser unit...
  21. Replies
    2
    Views
    930

    I had a very similar problem with two separate...

    I had a very similar problem with two separate Sharp FO-series fax machines, and both times it was phone company related (Verizon in my cases). If I remember correctly, there was excessive noise in...
  22. Replies
    5
    Views
    10,304

    Glad I could help! Have a good day....

    Glad I could help! Have a good day....
  23. Replies
    5
    Views
    10,304

    Fuser reset: Press 'system menu/counter' key,...

    Fuser reset: Press 'system menu/counter' key, select 'service setting', then while pressing 'start' and '#', press 'enter'. Select 'Maintenance mode', then press 'enter'. Enter '163' using the...
  24. Replies
    2
    Views
    505

    Some info here, if you still need it........ ...

    Some info here, if you still need it........

    http://www.copytechnet.com/forums/kyocera-mita-copystar/23201-2310-jam-duplex-every-time.html
  25. Thread: sharp AR-M350

    by qtech
    Replies
    2
    Views
    698

    That would be my first plan of...

    That would be my first plan of attack....disassemble, clean everything thoroughly, and check closely for cracks in the plastic parts.
Results 1 to 25 of 34
Page 1 of 2 1 2